%% You should probably cite draft-ietf-spring-stamp-srpm-mpls-11 instead of this revision.
@techreport{ietf-spring-stamp-srpm-mpls-00,
    number =    {draft-ietf-spring-stamp-srpm-mpls-00},
    type =      {Internet-Draft},
    institution =   {Internet Engineering Task Force},
    publisher = {Internet Engineering Task Force},
    note =      {Work in Progress},
    url =       {https://datatracker.ietf.org/doc/draft-ietf-spring-stamp-srpm-mpls/00/},
    author =    {Rakesh Gandhi and Clarence Filsfils and Bart Janssens and Mach Chen and Richard "Footer" Foote},
    title =     {{Performance Measurement Using Simple Two-Way Active Measurement Protocol (STAMP) for Segment Routing over the MPLS Data Plane}},
    pagetotal = 34,
    year =      2025,
    month =     oct,
    day =       2,
    abstract =  {Segment Routing (SR) leverages the source routing paradigm. SR is applicable to both Multiprotocol Label Switching (SR-MPLS) and IPv6 (SRv6) data planes. This document describes the procedures for Performance Measurement in SR-MPLS networks using the Simple Two-Way Active Measurement Protocol (STAMP), as defined in RFC 8762, along with its optional extensions defined in RFC 8972 and further augmented in RFC 9503. The described procedure is used for SR-MPLS paths (including SR-MPLS Policies, SR-MPLS IGP best paths, and SR- MPLS IGP Flexible Algorithm paths), as well as Layer-3 and Layer-2 services over the SR-MPLS paths.},
}