%% You should probably cite draft-ietf-spring-stamp-srpm-mpls-10 instead of this revision.
@techreport{ietf-spring-stamp-srpm-mpls-08,
    number =    {draft-ietf-spring-stamp-srpm-mpls-08},
    type =      {Internet-Draft},
    institution =   {Internet Engineering Task Force},
    publisher = {Internet Engineering Task Force},
    note =      {Work in Progress},
    url =       {https://datatracker.ietf.org/doc/draft-ietf-spring-stamp-srpm-mpls/08/},
    author =    {Rakesh Gandhi and Clarence Filsfils and Bart Janssens and Mach Chen and Richard "Footer" Foote},
    title =     {{Performance Measurement Using Simple Two-Way Active Measurement Protocol (STAMP) for Segment Routing over the MPLS Data Plane}},
    pagetotal = 40,
    year =      ,
    month =     ,
    day =       ,
    abstract =  {Segment Routing (SR) can be used to steer packets through a network employing source routing. SR can be applied to both MPLS (SR-MPLS) and IPv6 (SRv6) data planes. This document describes the procedures for performance measurement in SR-MPLS networks using the Simple Two- Way Active Measurement Protocol (STAMP), as specified in RFC 8762, along with its optional extensions specified in RFC 8972 and further augmented in RFC 9503. The procedures described in this document are used for SR-MPLS paths (including Segment Lists of SR-MPLS Policies, SR-MPLS IGP best paths, and SR-MPLS IGP Flexible Algorithm (Flex- Algo) paths), as well as Layer-3 and Layer-2 services carried over the SR-MPLS paths.},
}