Exported Authenticators in TLS
draft-ietf-tls-exported-authenticator-01
The information below is for an old version of the document.
| Document | Type | Active Internet-Draft (tls WG) | |
|---|---|---|---|
| Author | Nick Sullivan | ||
| Last updated | 2017-06-20 (Latest revision 2017-05-18) | ||
| Replaces | draft-sullivan-tls-exported-authenticator | ||
| Stream | Internet Engineering Task Force (IETF) | ||
| Formats | plain text htmlized pdfized bibtex | ||
| Reviews |
SECDIR Telechat review
(of
-14)
Has Issues
SECDIR Last Call review
(of
-13)
Has Nits
SECDIR Last Call review
(of
-09)
Has Issues
GENART Last Call review
(of
-09)
Ready with Issues
OPSDIR Last Call Review
Incomplete, due 2020-10-16
|
||
| Stream | WG state | WG Document | |
| Document shepherd | (None) | ||
| IESG | IESG state | I-D Exists | |
| Consensus boilerplate | Yes | ||
| Telechat date | (None) | ||
| Responsible AD | (None) | ||
| Send notices to | (None) |
draft-ietf-tls-exported-authenticator-01
TLS N. Sullivan
Internet-Draft Cloudflare Inc.
Intended status: Standards Track June 20, 2017
Expires: December 22, 2017
Exported Authenticators in TLS
draft-ietf-tls-exported-authenticator-01
Abstract
This document describes a mechanism in Transport Layer Security (TLS)
to provide an exportable proof of ownership of a certificate that can
be transmitted out of band and verified by the other party.
Status of This Memo
This Internet-Draft is submitted in full conformance with the
provisions of BCP 78 and BCP 79.
Internet-Drafts are working documents of the Internet Engineering
Task Force (IETF). Note that other groups may also distribute
working documents as Internet-Drafts. The list of current Internet-
Drafts is at http://datatracker.ietf.org/drafts/current/.
Internet-Drafts are draft documents valid for a maximum of six months
and may be updated, replaced, or obsoleted by other documents at any
time. It is inappropriate to use Internet-Drafts as reference
material or to cite them other than as "work in progress."
This Internet-Draft will expire on December 22, 2017.
Copyright Notice
Copyright (c) 2017 IETF Trust and the persons identified as the
document authors. All rights reserved.
This document is subject to BCP 78 and the IETF Trust's Legal
Provisions Relating to IETF Documents
(http://trustee.ietf.org/license-info) in effect on the date of
publication of this document. Please review these documents
carefully, as they describe your rights and restrictions with respect
to this document. Code Components extracted from this document must
include Simplified BSD License text as described in Section 4.e of
the Trust Legal Provisions and are provided without warranty as
described in the Simplified BSD License.
Sullivan Expires December 22, 2017 [Page 1]
Internet-Draft TLS Exported Authenticator June 2017
Table of Contents
1. Introduction . . . . . . . . . . . . . . . . . . . . . . . . 2
2. Authenticator . . . . . . . . . . . . . . . . . . . . . . . . 3
3. API considerations . . . . . . . . . . . . . . . . . . . . . 4
4. Security Considerations . . . . . . . . . . . . . . . . . . . 5
5. Acknowledgements . . . . . . . . . . . . . . . . . . . . . . 5
6. Normative References . . . . . . . . . . . . . . . . . . . . 5
Author's Address . . . . . . . . . . . . . . . . . . . . . . . . 6
1. Introduction
This document provides a way to authenticate one party of a Transport
Layer Security (TLS) communication to another using a certificate
after the session has been established. This allows both the client
and server to prove ownership of additional identities at any time
after the handshake has completed. This proof of authentication can
be exported and transmitted out of band from one party to be
validated by the other party.
This mechanism provides two advantages over the authentication that
TLS natively provides:
multiple identities - Endpoints that are authoritative for multiple
identities - but do not have a single certificate that includes
all of the identities - can authenticate with those identities
over a single connection.
spontaneous authentication - Endpoints can authenticate after a
connection is established, in response to events in a higher-layer
protocol, as well as integrating more context.
This document intends to replace much of the functionality of
renegotiation in previous versions of TLS. It has the advantages
over renegotiation of not requiring additional on-the-wire changes
during a connection. For simplicity, only TLS 1.2 and later are
supported.
Post-handshake authentication is defined in TLS 1.3, but it has the
disadvantage of requiring additional state to be stored in the TLS
state machine and it composes poorly with multiplexed connection
protocols like HTTP/2. It is also only available for client
authentication. This mechanism is intended to be used as part of a
replacement for post-handshake authentication in applications.
Sullivan Expires December 22, 2017 [Page 2]
Internet-Draft TLS Exported Authenticator June 2017
2. Authenticator
The authenticator is a structured message that can be exported from
either party of a TLS connection. It can be transmitted to the other
party of the TLS connection at the application layer. The
application layer protocol used to send the authenticator SHOULD use
TLS as its underlying transport.
An authenticator message can be constructed by either the client or
the server given an established TLS connection, a certificate, and a
corresponding private key. This authenticator uses the message
structures from section 4.4. of [I-D.ietf-tls-tls13], but different
parameters. Also, unlike the Certificate and CertificateRequest
messages in TLS 1.3, the messages described in this draft are not
encrypted with a handshake key.
Each authenticator is computed using a Handshake Context and Finished
MAC Key derived from the TLS session. The Handshake Context is
identical for both parties of the TLS connection, the Finished MAC
Key is dependent on whether the authenticator is created by the
client or the server.
o The Handshake Context is an [RFC5705] (for TLS 1.2) or
[I-D.ietf-tls-tls13] (for TLS 1.3) exporter value derived using
the label "EXPORTER-authenticator handshake context" and length 64
bytes. The context_value is absent (length zero).
o The Finished MAC Key is an exporter value derived using the label
"EXPORTER-server authenticator finished key" or "EXPORTER-client
authenticator finished key", depending on the sender. The length
of this key is equal to the length of the output of the hash
function selected in TLS for the pseudorandom function (PRF);
cipher suites that do not use the TLS PRF MUST define a hash
function that can be used for this purpose or they cannot be used.
If the connection is TLS 1.2, the master secret MUST have been
computed with the extended master secret [RFC7627] to avoid key
synchronization attacks.
Certificate The certificate to be used for authentication and any
supporting certificates in the chain.
The certificate message contains an opaque string called
certificate_request_context which MUST be unique for a given
connection. Its format should be defined by the application layer
protocol and MUST be non-zero length. For example, it may be a
sequence number used by the higher-level protocol during the
transport of the authenticator to the other party.
Sullivan Expires December 22, 2017 [Page 3]
Internet-Draft TLS Exported Authenticator June 2017
CertificateVerify A signature over the value Hash(Handshake
Context || Certificate)
Finished A HMAC over the value Hash(Handshake Context ||
Certificate || CertificateVerify) using the hash function from the
handshake and the Finished MAC Key as a key.
The certificates used in the Certificate message MUST conform to the
requirements of a Certificate message in the version of TLS
negotiated. This is described in section 4.2.3. of
[I-D.ietf-tls-tls13] and sections 7.4.2. and 7.4.6. of [RFC5246].
The exported authenticator message is the concatenation of messages:
Certificate || CertificateVerify || Finished
3. API considerations
The creation and validation of exported authenticators SHOULD be
implemented inside TLS library even if it is possible to implement it
at the application layer. TLS implementations supporting the use of
exported authenticators MUST provide application programming
interfaces by which clients and servers may request and verify
exported authenticator messages.
Given an established connection, the application should be able to
obtain an authenticator by providing the following:
o certificate_request_context (from 1 to 255 bytes)
o valid certificate chain for the connection and associated
extensions (OCSP, SCT, etc.)
o signer (either the private key associated with the certificate, or
interface to perform private key operation)
Given an established connection and an exported authenticator
message, the application should be able to provide the authenticator
to the connection. If the Finished and CertificateVerify messages
verify, the TLS library should return the following:
o certificate chain and extensions
o certificate_request_context
In order for the application layer to communicate which certificates
it will accept, an API should be exposed that returns an array of TLS
1.3 SignatureScheme objects that corresponds to the signature
Sullivan Expires December 22, 2017 [Page 4]
Internet-Draft TLS Exported Authenticator June 2017
algorithms that the library is willing to validate in an exported
authenticator message.
4. Security Considerations
The Certificate/Verify/Finished pattern intentionally looks like the
TLS 1.3 pattern which now has been analyzed several times. In the
case where the client presents an authenticator to a server, [SIGMAC]
presents a relevant framework for analysis.
Authenticators are independent and unidirectional. There is no
explicit state change inside TLS when an authenticator is either
created or validated.
o This property makes it difficult to formally prove that a server
is jointly authoritative over multiple certificates, rather than
individually authoritative over each.
o There is no indication in the TLS layer about which point in time
an authenticator was computed. Any feedback about the time of
creation or validation of the authenticator should be tracked as
part of the application layer semantics if required.
5. Acknowledgements
Comments on this proposal were provided by Martin Thomson.
Suggestions for the security considerations section were provided by
Karthikeyan Bhargavan.
6. Normative References
[I-D.ietf-tls-tls13]
Rescorla, E., "The Transport Layer Security (TLS) Protocol
Version 1.3", draft-ietf-tls-tls13-20 (work in progress),
April 2017.
[RFC5246] Dierks, T. and E. Rescorla, "The Transport Layer Security
(TLS) Protocol Version 1.2", RFC 5246,
DOI 10.17487/RFC5246, August 2008,
<http://www.rfc-editor.org/info/rfc5246>.
[RFC5705] Rescorla, E., "Keying Material Exporters for Transport
Layer Security (TLS)", RFC 5705, DOI 10.17487/RFC5705,
March 2010, <http://www.rfc-editor.org/info/rfc5705>.
Sullivan Expires December 22, 2017 [Page 5]
Internet-Draft TLS Exported Authenticator June 2017
[RFC7627] Bhargavan, K., Ed., Delignat-Lavaud, A., Pironti, A.,
Langley, A., and M. Ray, "Transport Layer Security (TLS)
Session Hash and Extended Master Secret Extension",
RFC 7627, DOI 10.17487/RFC7627, September 2015,
<http://www.rfc-editor.org/info/rfc7627>.
[SIGMAC] Krawczyk, H., "A Unilateral-to-Mutual Authentication
Compiler for Key Exchange (with Applications to Client
Authentication in TLS 1.3)", 2016,
<https://eprint.iacr.org/2016/711.pdf>.
Author's Address
Nick Sullivan
Cloudflare Inc.
Email: nick@cloudflare.com
Sullivan Expires December 22, 2017 [Page 6]