TRILL Support of Point to Multipoint BFD
draft-ietf-trill-p2mp-bfd-05

The information below is for an old version of the document
Document Type Expired Internet-Draft (trill WG)
Last updated 2017-11-13 (latest revision 2017-05-07)
Replaces draft-zhang-trill-p2mp-bfd
Stream IETF
Intended RFC status Proposed Standard
Formats
Expired & archived
plain text pdf html bibtex
Reviews
Stream WG state WG Consensus: Waiting for Write-Up
Document shepherd Susan Hares
Shepherd write-up Show (last changed 2017-11-11)
IESG IESG state Expired
Consensus Boilerplate Yes
Telechat date
Responsible AD (None)
Send notices to "Susan Hares" <shares@ndzh.com>

This Internet-Draft is no longer active. A copy of the expired Internet-Draft can be found at
https://www.ietf.org/archive/id/draft-ietf-trill-p2mp-bfd-05.txt

Abstract

Point to multipoint (P2MP) BFD is designed to verify multipoint connectivity. This document specifies the support of P2MP BFD in TRILL. Similar to TRILL point-to-point BFD, BFD Control packets in TRILL P2MP BFD are transmitted using RBridge Channel message. This document updates RFC 7175 and RFC 7177.

Authors

Mingui Zhang (zhangmingui@huawei.com)
Juniper Networks (santosh.pallagatti@gmail.com)
Vengada Govindan (venggovi@cisco.com)

(Note: The e-mail addresses provided for the authors of this Internet-Draft may no longer be valid.)