Skip to main content

Basic Requirements for IPv6 Customer Edge Routers
draft-ietf-v6ops-rfc7084-bis-04

Document Type Expired Internet-Draft (v6ops WG)
Expired & archived
Author Jordi Palet Martinez
Last updated 2024-08-05 (Latest revision 2017-06-12)
Replaces draft-palet-v6ops-rfc7084-bis, draft-v6ops-rfc7084-bis
RFC stream Internet Engineering Task Force (IETF)
Intended RFC status (None)
Formats
Additional resources Mailing list discussion
Stream WG state Dead WG Document
Other - see Comment Log
Document shepherd (None)
IESG IESG state Expired
Consensus boilerplate Unknown
Telechat date (None)
Responsible AD (None)
Send notices to (None)

This Internet-Draft is no longer active. A copy of the expired Internet-Draft is available in these formats:

Abstract

This document specifies requirements for an IPv6 Customer Edge (CE) router. Specifically, the current version of this document focuses on the basic provisioning of an IPv6 CE router and the provisioning of IPv6 hosts attached to it and the support of HNCP ([RFC7788]) for automated provisioning of downstream routers. The document also covers several transition technologies, as required in a world where IPv4 addresses are no longer available, so hosts in the customer LANs with IPv4-only or IPv6-only applications or devices, requiring to communicate with IPv4-only services at the Internet, are able to do so. The document obsoletes RFC 7084.

Authors

Jordi Palet Martinez

(Note: The e-mail addresses provided for the authors of this Internet-Draft may no longer be valid.)