The BBS Signature Scheme
draftirtfcfrgbbssignatures03
This document is an InternetDraft (ID) that has been submitted to the Internet Research Task Force (IRTF) stream.
This ID is not endorsed by the IETF and has no formal standing in the
IETF standards process.
The information below is for an old version of the document.
Document  Type 
This is an older version of an InternetDraft whose latest revision state is "Active".



Authors  Tobias Looker , Vasilis Kalos , Andrew Whitehead , Mike Lodder  
Last updated  20230710 (Latest revision 20230311)  
Replaces  draftlookercfrgbbssignatures  
RFC stream  Internet Research Task Force (IRTF)  
Formats  
Additional resources  Mailing list discussion  
Stream  IRTF state  Active RG Document  
Consensus boilerplate  Unknown  
Document shepherd  (None)  
IESG  IESG state  ID Exists  
Telechat date  (None)  
Responsible AD  (None)  
Send notices to  (None) 
draftirtfcfrgbbssignatures03
CFRG T. Looker InternetDraft V. Kalos Intended status: Informational MATTR Expires: 11 January 2024 A. Whitehead Portage M. Lodder CryptID 10 July 2023 The BBS Signature Scheme draftirtfcfrgbbssignatures03 Abstract BBS is a digital signature scheme categorized as a form of short group signature that supports several unique properties. Notably, the scheme supports signing multiple messages whilst producing a single output digital signature. Through this capability, the possessor of a signature is able to generate proofs that selectively disclose subsets of the originally signed set of messages, whilst preserving the verifiable authenticity and integrity of the messages. Furthermore, these proofs are said to be zeroknowledge in nature as they do not reveal the underlying signature; instead, what they reveal is a proof of knowledge of the undisclosed signature. Discussion Venues This note is to be removed before publishing as an RFC. Source for this draft and an issue tracker can be found at https://github.com/decentralizedidentity/bbssignature. Status of This Memo This InternetDraft is submitted in full conformance with the provisions of BCP 78 and BCP 79. InternetDrafts are working documents of the Internet Engineering Task Force (IETF). Note that other groups may also distribute working documents as InternetDrafts. The list of current Internet Drafts is at https://datatracker.ietf.org/drafts/current/. InternetDrafts are draft documents valid for a maximum of six months and may be updated, replaced, or obsoleted by other documents at any time. It is inappropriate to use InternetDrafts as reference material or to cite them other than as "work in progress." Looker, et al. Expires 11 January 2024 [Page 1] InternetDraft The BBS Signature Scheme July 2023 This InternetDraft will expire on 11 January 2024. Copyright Notice Copyright (c) 2023 IETF Trust and the persons identified as the document authors. All rights reserved. This document is subject to BCP 78 and the IETF Trust's Legal Provisions Relating to IETF Documents (https://trustee.ietf.org/ licenseinfo) in effect on the date of publication of this document. Please review these documents carefully, as they describe your rights and restrictions with respect to this document. Code Components extracted from this document must include Revised BSD License text as described in Section 4.e of the Trust Legal Provisions and are provided without warranty as described in the Revised BSD License. Table of Contents 1. Introduction . . . . . . . . . . . . . . . . . . . . . . . . 4 1.1. Terminology . . . . . . . . . . . . . . . . . . . . . . . 6 1.2. Notation . . . . . . . . . . . . . . . . . . . . . . . . 7 1.3. Document Organization . . . . . . . . . . . . . . . . . . 9 2. Conventions . . . . . . . . . . . . . . . . . . . . . . . . . 9 3. Scheme Definition . . . . . . . . . . . . . . . . . . . . . . 9 3.1. Parameters . . . . . . . . . . . . . . . . . . . . . . . 9 3.2. Considerations . . . . . . . . . . . . . . . . . . . . . 9 3.2.1. Subgroup Selection . . . . . . . . . . . . . . . . . 10 3.2.2. Generators . . . . . . . . . . . . . . . . . . . . . 10 3.2.3. Serializing to Octets . . . . . . . . . . . . . . . . 10 3.3. Key Generation Operations . . . . . . . . . . . . . . . . 11 3.3.1. Secret Key . . . . . . . . . . . . . . . . . . . . . 11 3.3.2. Public Key . . . . . . . . . . . . . . . . . . . . . 12 3.4. Core Operations . . . . . . . . . . . . . . . . . . . . . 13 3.4.1. Signature Generation (Sign) . . . . . . . . . . . . . 13 3.4.2. Signature Verification (Verify) . . . . . . . . . . . 15 3.4.3. Proof Generation (ProofGen) . . . . . . . . . . . . . 16 3.4.4. Proof Verification (ProofVerify) . . . . . . . . . . 18 4. Utility Operations . . . . . . . . . . . . . . . . . . . . . 19 4.1. Random Scalars . . . . . . . . . . . . . . . . . . . . . 20 4.2. Generators Calculation . . . . . . . . . . . . . . . . . 20 4.2.1. Hash to Generators . . . . . . . . . . . . . . . . . 21 4.2.2. Defining new ways to create generators . . . . . . . 23 4.3. Messages to Scalars . . . . . . . . . . . . . . . . . . . 23 4.3.1. Map to Scalar . . . . . . . . . . . . . . . . . . . . 24 4.3.2. Define a new Map to Scalar . . . . . . . . . . . . . 26 4.4. Hash to Scalar . . . . . . . . . . . . . . . . . . . . . 26 4.5. Domain Calculation . . . . . . . . . . . . . . . . . . . 27 4.6. Challenge Calculation . . . . . . . . . . . . . . . . . . 29 Looker, et al. Expires 11 January 2024 [Page 2] InternetDraft The BBS Signature Scheme July 2023 4.7. Serialization . . . . . . . . . . . . . . . . . . . . . . 30 4.7.1. Serialize . . . . . . . . . . . . . . . . . . . . . . 31 4.7.2. Signature to Octets . . . . . . . . . . . . . . . . . 32 4.7.3. Octets to Signature . . . . . . . . . . . . . . . . . 32 4.7.4. Proof to Octets . . . . . . . . . . . . . . . . . . . 33 4.7.5. Octets to Proof . . . . . . . . . . . . . . . . . . . 34 4.7.6. Octets to Public Key . . . . . . . . . . . . . . . . 36 5. Security Considerations . . . . . . . . . . . . . . . . . . . 36 5.1. Validating Public Keys . . . . . . . . . . . . . . . . . 36 5.2. Point Deserialization . . . . . . . . . . . . . . . . . . 37 5.3. Skipping Membership Checks . . . . . . . . . . . . . . . 37 5.4. Side Channel Attacks . . . . . . . . . . . . . . . . . . 37 5.5. Randomness Considerations . . . . . . . . . . . . . . . . 37 5.6. Presentation Header Selection . . . . . . . . . . . . . . 38 5.7. Implementing hash_to_curve_g1 . . . . . . . . . . . . . . 38 5.8. Choice of Underlying Curve . . . . . . . . . . . . . . . 38 5.9. ProofGen Security . . . . . . . . . . . . . . . . . . . . 39 5.10. Randomness Requirements . . . . . . . . . . . . . . . . . 39 6. Ciphersuites . . . . . . . . . . . . . . . . . . . . . . . . 39 6.1. Ciphersuite Format . . . . . . . . . . . . . . . . . . . 40 6.1.1. Ciphersuite ID . . . . . . . . . . . . . . . . . . . 40 6.1.2. Additional Parameters . . . . . . . . . . . . . . . . 40 6.2. BLS12381 Ciphersuites . . . . . . . . . . . . . . . . . 42 6.2.1. BLS12381SHAKE256 . . . . . . . . . . . . . . . . . 42 6.2.2. BLS12381SHA256 . . . . . . . . . . . . . . . . . . 43 7. Test Vectors . . . . . . . . . . . . . . . . . . . . . . . . 45 7.1. Mocked Random Scalars . . . . . . . . . . . . . . . . . . 45 7.2. Messages . . . . . . . . . . . . . . . . . . . . . . . . 46 7.3. BLS12381SHAKE256 Test Vectors . . . . . . . . . . . . 47 7.3.1. Key Pair . . . . . . . . . . . . . . . . . . . . . . 47 7.3.2. Map Messages to Scalars . . . . . . . . . . . . . . . 48 7.3.3. Message Generators . . . . . . . . . . . . . . . . . 48 7.3.4. Signature Fixtures . . . . . . . . . . . . . . . . . 49 7.3.5. Proof Fixtures . . . . . . . . . . . . . . . . . . . 50 7.4. BLS12381SHA256 Test Vectors . . . . . . . . . . . . . . 52 7.4.1. Key Pair . . . . . . . . . . . . . . . . . . . . . . 52 7.4.2. Map Messages to Scalars . . . . . . . . . . . . . . . 53 7.4.3. Message Generators . . . . . . . . . . . . . . . . . 53 7.4.4. Signature Fixtures . . . . . . . . . . . . . . . . . 54 7.4.5. Proof Fixtures . . . . . . . . . . . . . . . . . . . 55 8. IANA Considerations . . . . . . . . . . . . . . . . . . . . . 57 9. Acknowledgements . . . . . . . . . . . . . . . . . . . . . . 57 10. Normative References . . . . . . . . . . . . . . . . . . . . 57 11. Informative References . . . . . . . . . . . . . . . . . . . 58 Appendix A. BLS12381 hash_to_curve Definition Using SHAKE256 . . . . . . . . . . . . . . . . . . . . . . . . 59 A.1. BLS12381 G1 . . . . . . . . . . . . . . . . . . . . . . 60 Appendix B. Use Cases . . . . . . . . . . . . . . . . . . . . . 61 Looker, et al. Expires 11 January 2024 [Page 3] InternetDraft The BBS Signature Scheme July 2023 B.1. Noncorrelating Security Token . . . . . . . . . . . . . 61 B.2. Improved Bearer Security Token . . . . . . . . . . . . . 61 B.3. Selectively Disclosure Enabled Identity Credentials . . . 62 Appendix C. Additional Test Vectors . . . . . . . . . . . . . . 62 C.1. BLS12381SHAKE256 Ciphersuite . . . . . . . . . . . . . 63 C.1.1. Signature Test Vectors . . . . . . . . . . . . . . . 63 C.1.2. Proof Test Vectors . . . . . . . . . . . . . . . . . 66 C.1.3. Hash to Scalar Test Vectors . . . . . . . . . . . . . 67 C.2. BLS12381SHA256 Ciphersuite . . . . . . . . . . . . . . 67 C.2.1. Signature Test Vectors . . . . . . . . . . . . . . . 67 C.2.2. Proof Test Vectors . . . . . . . . . . . . . . . . . 71 C.2.3. Hash to Scalar Test Vectors . . . . . . . . . . . . . 72 Appendix D. Proof Generation and Verification Algorithmic Explanation . . . . . . . . . . . . . . . . . . . . . . . 72 Appendix E. Document History . . . . . . . . . . . . . . . . . . 74 Authors' Addresses . . . . . . . . . . . . . . . . . . . . . . . 75 1. Introduction A digital signature scheme is a fundamental cryptographic primitive that is used to provide data integrity and verifiable authenticity in various protocols. The core premise of digital signature technology is built upon asymmetric cryptography whereby the possessor of a private key is able to sign a message, where anyone in possession of the corresponding public key matching that of the private key is able to verify the signature. The name BBS is derived from the authors of the original academic work of Dan Boneh, Xavier Boyen, and Hovav Shacham, where the scheme was first described. Beyond the core properties of a digital signature scheme, BBS signatures provide multiple additional unique properties, three key ones are: *Selective Disclosure*  The scheme allows a signer to sign multiple messages and produce a single constant size output signature. A holder/prover then possessing the messages and the signature can generate a proof whereby they can choose which messages to disclose, while revealing noinformation about the undisclosed messages. The proof itself guarantees the integrity and authenticity of the disclosed messages (e.g. that they were originally signed by the signer). Looker, et al. Expires 11 January 2024 [Page 4] InternetDraft The BBS Signature Scheme July 2023 *Unlinkable Proofs*  The proofs generated by the scheme are known as zeroknowledge, proofsofknowledge of the signature, meaning a verifying party in receipt of a proof is unable to determine which signature was used to generate the proof, removing a common source of correlation. In general, each proof generated is indistinguishable from random even for two proofs generated from the same signature. *Proof of Possession*  The proofs generated by the scheme prove to a verifier that the party who generated the proof (holder/prover) was in possession of a signature without revealing it. The scheme also supports binding a presentation header to the generated proof. The presentation header can include arbitrary information such as a cryptographic nonce, an audience/domain identifier and or time based validity information. Refer to the Appendix B for an elaboration on situations where these properties are useful Below is a basic diagram describing the main entities involved in the scheme Looker, et al. Expires 11 January 2024 [Page 5] InternetDraft The BBS Signature Scheme July 2023 (1) sign (3) ProofGen + +          \ /  \ / ++ ++              Signer (2)* Send signature + msgs> Holder/     Prover          ++ ++    (4)* Send proof + disclosed msgs   \ / ++        Verifier        ++  / \     + (5) ProofVerify Figure 1: Basic diagram capturing the main entities involved in using the scheme *Note* The protocols implied by the items annotated by an asterisk are out of scope for this specification 1.1. Terminology The following terminology is used throughout this document: SK The secret key for the signature scheme. PK The public key for the signature scheme. Looker, et al. Expires 11 January 2024 [Page 6] InternetDraft The BBS Signature Scheme July 2023 L The total number of signed messages. R The number of message indexes that are disclosed (revealed) in a proofofknowledge of a signature. U The number of message indexes that are undisclosed in a proofof knowledge of a signature. scalar An integer between 0 and r1, where r is the prime order of the selected groups, defined by each ciphersuite (see also Notation (#notation)). input_message An input message to be signed by the signature scheme. An input_message can either be either an octet string or a scalar. generator A valid point on the selected subgroup of the curve being used that is employed to commit a value. signature The digital signature output. nonce A cryptographic nonce presentation_header (ph) A payload generated and bound to the context of a specific spk. dst The domain separation tag. I2OSP An operation that transforms a nonnegative integer into an octet string, defined in Section 4 of [RFC8017]. Note, the output of this operation is in bigendian order. OS2IP An operation that transforms a octet string into an non negative integer, defined in Section 4 of [RFC8017]. Note, the input of this operation must be in bigendian order. INVALID, ABORT Error indicators. INVALID refers to an error encountered during the Deserialization or Procedure steps of an operation. An INVALID value can be returned by a subroutine and handled by the calling operation. ABORT indicates that one or more of the initial constraints defined by the operation are not met. In that case, the operation will stop execution. An operation calling a subroutine that aborted must also immediately abort. 1.2. Notation The following notation and primitives are used: a  b Denotes the concatenation of octet strings a and b. I \ J For sets I and J, denotes the difference of the two sets i.e., all the elements of I that do not appear in J, in the same order as they were in I. X[a..b] Denotes a slice of the array X containing all elements from and including the value at index a until and including the value at index b. Note when this syntax is applied to an octet string, each element in the array X is assumed to be a single byte. range(a, b) For integers a and b, with a <= b, denotes the ascending ordered list of all integers between a and b inclusive (i.e., the integers "i" such that a <= i <= b). length(input) Takes as input either an array or an octet string. If Looker, et al. Expires 11 January 2024 [Page 7] InternetDraft The BBS Signature Scheme July 2023 the input is an array, returns the number of elements of the array. If the input is an octet string, returns the number of bytes of the inputted octet string. Terms specific to pairingfriendly elliptic curves that are relevant to this document are restated below, originally defined in [ID.irtfcfrgpairingfriendlycurves]. E1, E2 elliptic curve groups defined over finite fields. This document assumes that E1 has a more compact representation than E2, i.e., because E1 is defined over a smaller field than E2. For a pairingfriendly curve, this document denotes operations in E1 and E2 in additive notation, i.e., P + Q denotes point addition and x * P denotes scalar multiplication. G1, G2 subgroups of E1 and E2 (respectively) having prime order r. GT a subgroup, of prime order r, of the multiplicative group of a field extension. e G1 x G2 > GT: a nondegenerate bilinear map. r The prime order of the G1 and G2 subgroups. BP1, BP2 base (constant) points on the G1 and G2 subgroups respectively. Identity_G1, Identity_G2, Identity_GT The identity element for the G1, G2, and GT subgroups respectively. hash_to_curve_g1(ostr, dst) > P A cryptographic hash function that takes an arbitrary octet string as input and returns a point in G1, using the hash_to_curve operation defined in [ID.irtfcfrghashtocurve] and the inputted dst as the domain separation tag for that operation (more specifically, the inputted dst will become the DST parameter for the hash_to_field operation, called by hash_to_curve). point_to_octets_g1(P) > ostr, point_to_octets_g2(P) > ostr returns the canonical representation of the point P for the respective subgroup as an octet string. This operation is also known as serialization. octets_to_point_g1(ostr) > P, octets_to_point_g2(ostr) > P returns the point P for the respective subgroup corresponding to the canonical representation ostr, or INVALID if ostr is not a valid output of the respective point_to_octets_g* function. This operation is also known as deserialization. subgroup_check(P) > VALID or INVALID returns VALID when the point P is an element of the subgroup of order r, and INVALID otherwise. This function can always be implemented by checking that r * P is equal to the identity element. In some cases, faster checks may also exist, e.g., [Bowe19]. Looker, et al. Expires 11 January 2024 [Page 8] InternetDraft The BBS Signature Scheme July 2023 1.3. Document Organization This document is organized as follows: * Scheme Definition (#schemedefinition) defines the core operations and parameters for the BBS signature scheme. * Utility Operations (#utilityoperations) defines utilities used by the BBS signature scheme. * Security Considerations (#securityconsiderations) describes a set of security considerations associated to the signature scheme. * Ciphersuites (#ciphersuites) defines the format of a ciphersuite, alongside a concrete ciphersuite based on the BLS12381 curve. 2. Conventions The keywords MUST, MUST NOT, REQUIRED, SHALL, SHALL NOT, SHOULD, SHOULD NOT, RECOMMENDED, MAY, and OPTIONAL, when they appear in this document, are to be interpreted as described in [RFC2119]. 3. Scheme Definition This section defines the BBS signature scheme, including the parameters required to define a concrete ciphersuite. 3.1. Parameters The schemes operations defined in this section depend on the following parameters: * A pairingfriendly elliptic curve, plus associated functionality given in Section 1.2 (#notation). * A hashtocurve suite as defined in [ID.irtfcfrghashtocurve], using the aforementioned pairingfriendly curve. This defines the hash_to_curve and expand_message operations, used by this document. * get_random(n): returns a random octet string with a length of n bytes, sampled uniformly at random using a cryptographically secure pseudorandom number generator (CSPRNG) or a pseudo random function. See [RFC4086] for recommendations and requirements on the generation of random numbers. 3.2. Considerations Looker, et al. Expires 11 January 2024 [Page 9] InternetDraft The BBS Signature Scheme July 2023 3.2.1. Subgroup Selection In definition of this signature scheme there are two possible variations based upon the subgroup selection, namely where public keys are defined in G2 and signatures in G1 OR the opposite where public keys are defined in G1 and signatures in G2. Some pairing cryptography based digital signature schemes such as [ID.irtfcfrgblssignature] elect to allow for both variations, because they optimize for different things. However, in the case of this scheme, due to the operations involved in both signature and proof generation being computational inefficient when performed in G2 and in the pursuit of simplicity, the scheme is limited to a construction where public keys are in G2 and signatures in G1. 3.2.2. Generators Throughout the operations of this signature scheme, each message that is signed is paired with a specific point of G1, called a generator. Specifically, if a generator H_1 is multiplied with msg_1 during signing, then H_1 MUST be multiplied with msg_1 in all other operations (signature verification, proof generation and proof verification). As a result, the messages must be passed to the operations of the BBS scheme in the same order. Aside from the message generators, the scheme uses one additional generator Q_1 to sign the signature's domain, which binds both the signature and generated proofs to a specific context and cryptographically protects any potential applicationspecific information (for example, messages that must always be disclosed etc.). 3.2.3. Serializing to Octets When serializing one or more values to produce an octet string, each element will be encoded using a specific operation determined by its type. More concretely, * Points in G* will be serialized using the point_to_octets_g* implementation for a particular ciphersuite. * Nonnegative integers will be serialized using I2OSP with an output length of 8 bytes. * Scalars will be serialized using I2OSP with a constant output length defined by a particular ciphersuite. We also use strings in double quotes to represent ASCIIencoded literals. For example "BBS" will be used to refer to the octet string, 010000100100001001010011. Looker, et al. Expires 11 January 2024 [Page 10] InternetDraft The BBS Signature Scheme July 2023 Those rules will be used explicitly on every operation. See also Serialize (#serialize). 3.3. Key Generation Operations 3.3.1. Secret Key This operation generates a secret key (SK) deterministically from a secret octet string (key_material). This operation is the RECOMMENDED way of generating a secret key, but its use is not required for compatibility, and implementations MAY use a different key generation procedure. For security, such an alternative MUST output a secret key that is statistically close to uniformly random in the range from 1 to r1. An example of an HKDFbased alternative is the KeyGen operation defined in Section 2.3 of [ID.irtfcfrgblssignature] (with an appropriate, BBS specific, salt value, like "BBS_SIG_KEYGEN_SALT_"). For security, key_material MUST be random and infeasible to guess, e.g. generated by a trusted source of randomness and with enough entropy. See [RFC4086] for suggestions on generating randomness. key_material MUST be at least 32 bytes long, but it MAY be longer. KeyGen takes an optional input, key_info. This parameter MAY be used to derive distinct keys from the same key material. Because KeyGen is deterministic, implementations MAY choose either to store the resulting SK or to store key_material and key_info and call KeyGen to derive SK when necessary. Looker, et al. Expires 11 January 2024 [Page 11] InternetDraft The BBS Signature Scheme July 2023 SK = KeyGen(key_material, key_info, key_dst) Inputs:  key_material (REQUIRED), a secret octet string. See requirements above.  key_info (OPTIONAL), an octet string. Defaults to an empty string if not supplied.  key_dst (OPTIONAL), an octet string representing the domain separation tag. Defaults to the octet string ciphersuite_id  "KEYGEN_DST_" if not supplied. Outputs:  SK, a uniformly random integer such that 0 < SK < r. Procedure: 1. if length(key_material) < 32, return INVALID 2. if length(key_info) > 65535, return INVALID 3. derive_input = key_material  I2OSP(length(key_info), 2)  key_info 4. SK = hash_to_scalar(derive_input, key_dst) 5. if SK is INVALID, return INVALID 6. return SK 3.3.2. Public Key This operation takes a secret key (SK) and outputs a corresponding public key (PK). PK = SkToPk(SK) Inputs:  SK (REQUIRED), a secret integer such that 0 < SK < r. Outputs:  PK, a public key encoded as an octet string. Procedure: 1. W = SK * BP2 2. return point_to_octets_g2(W) Looker, et al. Expires 11 January 2024 [Page 12] InternetDraft The BBS Signature Scheme July 2023 3.4. Core Operations The operations of this section make use of functions and subroutines defined in Utility Operations (#utilityoperations). More specifically, * hash_to_scalar is defined in Section 4.4 * messages_to_scalars is defined in Section 4.3 * calculate_domain and calculate_challenge are defined in Section 4.5 and Section 4.6 correspondingly. * serialize, signature_to_octets, octets_to_signature, proof_to_octets, octets_to_proof and octets_to_pubkey are defined in Section 4.7 The following operations also make use of the create_generators operation defined in Section 4.2, to create generator points on G1 (see Section 3.2.2). Note that the values of those points depends only on a cipheruite defined seed. As a result, the output of that operation can be cached to avoid unnecessary calls to the create_generators procedure. See Section 4.2 for more details. *Note* Some of the utility functions used by the core operations of this section could fail (ABORT). In that case, the calling operation MUST also immediately abort. 3.4.1. Signature Generation (Sign) This operation computes a deterministic signature from a secret key (SK) and optionally over a header and or a vector of input_messages (see Terminology (#terminology) for the definition of a input_message). Looker, et al. Expires 11 January 2024 [Page 13] InternetDraft The BBS Signature Scheme July 2023 signature = Sign(SK, PK, header, messages) Inputs:  SK (REQUIRED), a secret key in the form outputted by the KeyGen operation.  PK (REQUIRED), an octet string of the form outputted by SkToPk provided the above SK as input.  header (OPTIONAL), an octet string containing context and application specific information. If not supplied, it defaults to an empty string.  messages (OPTIONAL), a vector of input_messages. If not supplied, it defaults to the empty array "()". Parameters:  P1, fixed point of G1, defined by the ciphersuite. Outputs:  signature, a signature encoded as an octet string. Deserialization: 1. L = length(messages) 2. (msg_1, ..., msg_L) = messages_to_scalars(messages) Procedure: 1. (Q_1, H_1, ..., H_L) = create_generators(L+1, PK) 2. domain = calculate_domain(PK, Q_1, (H_1, ..., H_L), header) 3. e = hash_to_scalar(serialize((SK, domain, msg_1, ..., msg_L))) 4. B = P1 + Q_1 * domain + H_1 * msg_1 + ... + H_L * msg_L 5. A = B * (1 / (SK + e)) 6. return signature_to_octets(A, e) *Note* When computing step 12 of the above procedure there is an extremely small probability (around 2^(r)) that the condition (SK + e) = 0 mod r will be met. How implementations evaluate the inverse of the scalar value 0 may vary, with some returning an error and others returning 0 as a result. If the returned value from the inverse operation 1/(SK + e) does evaluate to 0 the value of A will equal Identity_G1 thus an invalid signature. Implementations MAY elect to check (SK + e) = 0 mod r prior to step 9, and or A != Identity_G1 after step 9 to prevent the production of invalid signatures. Looker, et al. Expires 11 January 2024 [Page 14] InternetDraft The BBS Signature Scheme July 2023 3.4.2. Signature Verification (Verify) This operation checks that a signature is valid for a given header and vector of input_messages against a supplied public key (PK). The input_messages MUST be supplied in this operation in the same order they were supplied to Sign (#signaturegenerationsign) when creating the signature. result = Verify(PK, signature, header, messages) Inputs:  PK (REQUIRED), an octet string of the form outputted by the SkToPk operation.  signature (REQUIRED), an octet string of the form outputted by the Sign operation.  header (OPTIONAL), an octet string containing context and application specific information. If not supplied, it defaults to an empty string.  messages (OPTIONAL), a vector of input_messages. If not supplied, it defaults to the empty array "()". Parameters:  P1, fixed point of G1, defined by the ciphersuite. Outputs:  result, either VALID or INVALID. Deserialization: 1. signature_result = octets_to_signature(signature) 2. if signature_result is INVALID, return INVALID 3. (A, e) = signature_result 4. W = octets_to_pubkey(PK) 5. if W is INVALID, return INVALID 6. L = length(messages) 7. (msg_1, ..., msg_L) = messages_to_scalars(messages) Procedure: 1. (Q_1, H_1, ..., H_L) = create_generators(L+1, PK) 2. domain = calculate_domain(PK, Q_1, (H_1, ..., H_L), header) 3. B = P1 + Q_1 * domain + H_1 * msg_1 + ... + H_L * msg_L 4. if e(A, W + BP2 * e) * e(B, BP2) != Identity_GT, return INVALID 5. return VALID Looker, et al. Expires 11 January 2024 [Page 15] InternetDraft The BBS Signature Scheme July 2023 3.4.3. Proof Generation (ProofGen) This operation computes a zeroknowledge proofofknowledge of a signature, while optionally selectively disclosing from the original set of signed messages. The "prover" may also supply a presentation header, see Presentation header selection (#presentationheader selection) for more details. Validating the resulting proof (using the ProofVerify algorithm defined in Section 3.4.4), guarantees the integrity and authenticity of the revealed messages, as well as the possession of a valid signature (for the public key PK) by the prover. The ProofGen operation will accept that signature as an input. It is RECOMMENDED to validate that signature, using the inputted public key PK, with the Verify operation defined in Section 3.4.2. The input_messages supplied in this operation MUST be in the same order as when supplied to Sign (#signaturegenerationsign). To specify which of those input_messages will be disclosed, the prover can supply the list of indexes (disclosed_indexes) that the disclosed messages have in the array of signed messages. Each element in disclosed_indexes MUST be a nonnegative integer, in the range from 1 to length(messages). The operation calculates multiple random scalars using the calculate_random_scalars utility operation defined in Section 4.1. See also Section 5.10 for considerations and requirements on random scalars generation. To allow for flexibility in implementations, although ProofGen defines a specific value for expand_len, applications may use any value larger than ceil((ceil(log2(r))+k)/8) (for example, for the BLS12381SHAKE256 and BLS12381SHA256 ciphersuites, an implementation can elect to use a value of 64, instead of 48, as to allow for certain optimizations). proof = ProofGen(PK, signature, header, ph, messages, disclosed_indexes) Inputs:  PK (REQUIRED), an octet string of the form outputted by the SkToPk operation.  signature (REQUIRED), an octet string of the form outputted by the Sign operation.  header (OPTIONAL), an octet string containing context and application specific information. If not supplied, it defaults to an empty string.  ph (OPTIONAL), an octet string containing the presentation header. If Looker, et al. Expires 11 January 2024 [Page 16] InternetDraft The BBS Signature Scheme July 2023 not supplied, it defaults to an empty string.  messages (OPTIONAL), a vector of input\_messages. If not supplied, it defaults to the empty array "()".  disclosed_indexes (OPTIONAL), vector of unsigned integers in ascending order. Indexes of disclosed messages. If not supplied, it defaults to the empty array "()". Parameters:  P1, fixed point of G1, defined by the ciphersuite. Outputs:  proof, an octet string; or INVALID. Deserialization: 1. signature_result = octets_to_signature(signature) 2. if signature_result is INVALID, return INVALID 3. (A, e) = signature_result 4. L = length(messages) 5. R = length(disclosed_indexes) 6. if R > L, return INVALID 7. U = L  R 8. (i1, ..., iR) = disclosed_indexes 9. (j1, ..., jU) = range(1, L) \ disclosed_indexes 10. msg_scalars = messages_to_scalars(messages) 11. (msg_1, ..., msg_L) = msg_scalars 12. (msg_i1, ..., msg_iR) = (msg_scalars[i1], ..., msg_scalars[iR]) 13. (msg_j1, ..., msg_jU) = (msg_scalars[j1], ..., msg_scalars[jU]) ABORT if: 1. for i in (i1, ..., iR), i < 1 or i > L Procedure: 1. (Q_1, MsgGenerators) = create_generators(L+1, PK) 2. (H_1, ..., H_L) = MsgGenerators 3. (H_j1, ..., H_jU) = (MsgGenerators[j1], ..., MsgGenerators[jU]) 4. domain = calculate_domain(PK, Q_1, (H_1, ..., H_L), header) 5. random_scalars = calculate_random_scalars(3+U) 6. (r1, r2, r3, m~_j1, ..., m~_jU) = random_scalars 7. B = P1 + Q_1 * domain + H_1 * msg_1 + ... + H_L * msg_L 8. Abar = A * r1 9. Bbar = B * r1  Abar * e 10. T = Abar * r2 + Bbar * r3 + H_j1 * m~_j1 + ... + H_jU * m~_jU Looker, et al. Expires 11 January 2024 [Page 17] InternetDraft The BBS Signature Scheme July 2023 11. c = calculate_challenge(Abar, Bbar, T, (i1, ..., iR), (msg_i1, ..., msg_iR), domain, ph) 12. r4 =  r1^1 (mod r) 13. r2^ = r2 + e * r4 * c (mod r) 14. r3^ = r3 + r4 * c (mod r) 15. for j in (j1, ..., jU): m^_j = m~_j + msg_j * c (mod r) 16. proof = (Abar, Bbar, r2^, r3^, (m^_j1, ..., m^_jU), c) 17. return proof_to_octets(proof) 3.4.4. Proof Verification (ProofVerify) This operation checks that a proof is valid for a header, vector of disclosed messages (along side their index corresponding to their original position when signed) and presentation header against a public key (PK). The operation accepts the messages the prover indicated to be disclosed. Those messages MUST be in the same order as when supplied to Sign (#signaturegenerationsign) (as a subset of the signed messages). Lastly, it also accepts the indexes that the disclosed messages had in the original array of messages supplied to Sign (#signaturegenerationsign) (i.e., the disclosed_indexes list supplied to ProofGen (#proofgenerationproofgen)). Every element in this list MUST be a nonnegative integer in the range from 1 to L, in ascending order. result = ProofVerify(PK, proof, header, ph, disclosed_messages, disclosed_indexes) Inputs:  PK (REQUIRED), an octet string of the form outputted by the SkToPk operation.  proof (REQUIRED), an octet string of the form outputted by the ProofGen operation.  header (OPTIONAL), an optional octet string containing context and application specific information. If not supplied, it defaults to an empty string.  ph (OPTIONAL), an octet string containing the presentation header. If not supplied, it defaults to an empty string.  disclosed_messages (OPTIONAL), a vector of input_messages. If not supplied, it defaults to the empty array "()".  disclosed_indexes (OPTIONAL), vector of unsigned integers in ascending order. Indexes of disclosed messages. If not supplied, it defaults to the empty array "()". Looker, et al. Expires 11 January 2024 [Page 18] InternetDraft The BBS Signature Scheme July 2023 Parameters:  P1, fixed point of G1, defined by the ciphersuite. Outputs:  result, either VALID or INVALID. Deserialization: 1. proof_result = octets_to_proof(proof) 2. if proof_result is INVALID, return INVALID 3. (Abar, Bbar, r2^, r3^, commitments, c) = proof_result 4. W = octets_to_pubkey(PK) 5. if W is INVALID, return INVALID 6. U = length(commitments) 7. R = length(disclosed_indexes) 8. L = R + U 9. (i1, ..., iR) = disclosed_indexes 10. (j1, ..., jU) = range(1, L) \ disclosed_indexes 11. (msg_i1, ..., msg_iR) = messages_to_scalars(disclosed_messages) 12. (m^_j1, ...., m^_jU) = commitments ABORT if: 1. for i in (i1, ..., iR), i < 1 or i > L 2. length(disclosed_messages) != R Procedure: 1. (Q_1, MsgGenerators) = create_generators(L+1, PK) 2. (H_1, ..., H_L) = MsgGenerators 3. (H_i1, ..., H_iR) = (MsgGenerators[i1], ..., MsgGenerators[iR]) 4. (H_j1, ..., H_jU) = (MsgGenerators[j1], ..., MsgGenerators[jU]) 5. domain = calculate_domain(PK, Q_1, (H_1, ..., H_L), header) 6. D = P1 + Q_1 * domain + H_i1 * msg_i1 + ... + H_iR * msg_iR 7. T = Abar * r2^ + Bbar * r3^ + H_j1 * m^_j1 + ... + H_jU * m^_jU 8. T = T + D * c 9. cv = calculate_challenge(Abar, Bbar, T, (i1, ..., iR), (msg_i1, ..., msg_iR), domain, ph) 10. if c != cv, return INVALID 11. if e(Abar, W) * e(Bbar, BP2) != Identity_GT, return INVALID 12. return VALID 4. Utility Operations Looker, et al. Expires 11 January 2024 [Page 19] InternetDraft The BBS Signature Scheme July 2023 4.1. Random Scalars This operation returns the requested number of pseudorandom scalars, using the get_random operation (see Parameters (#parameters)). The operation makes multiple calls to get_random. It is REQUIRED that each call will be independent from each other, as to ensure independence of the returned pseudorandom scalars. *Note*: The security of the proof generation algorithm (ProofGen (#proofgenerationproofgen)) is highly dependant on the quality of the get_random function. Care must be taken to ensure that a cryptographically secure pseudorandom generator is chosen, and that its outputs are not leaked to an adversary. See also Section 5.10 (#randomnessrequirements) for more details. random_scalars = calculate_random_scalars(count) Inputs:  count (REQUIRED), non negative integer. The number of pseudo random scalars to return. Parameters:  get_random, a pseudo random function with extendable output, returning uniformly distributed pseudo random bytes.  expand_len, defined by the ciphersuite. Outputs:  random_scalars, a list of pseudo random scalars, Procedure: 1. for i in (1, ..., count): 2. r_i = OS2IP(get_random(expand_len)) mod r 3. return (r_1, r_2, ..., r_count) 4.2. Generators Calculation A create_generators procedure defines how to create a set of randomly sampled points from the G1 subgroup, called the generators. Generators form a part of the public parameters used by the BBS Signature scheme to accomplish operations such as Sign (#signature generationsign), Verify (#signatureverificationverify), ProofGen (#proofgenerationproofgen) and ProofVerify (#proofverification proofverify). A create_generators operation takes as input the following arguments, Looker, et al. Expires 11 January 2024 [Page 20] InternetDraft The BBS Signature Scheme July 2023 * count (REQUIRED), a nonnegative integer describing the number of generator points to create, which is determined in part by the number of signed messages. * PK (OPTIONAL), a point of G2, representing the Signer's public key. As a result, the create_generators operation has the following signature, (G_1, G_2, ..., G_count) = create_generators(count, PK) Each procedure MUST define a unique CREATE_GENERATORS_ID to be used by the ciphersuite. This value MUST only contain ASCII encoded characters with codes between 0x21 and 0x7e (inclusive) and MUST end with an underscore (ASCII code: 0x5f), other than the last character the string MUST not contain any other underscores (ASCII code: 0x5f). 4.2.1. Hash to Generators The hash_to_generators operation makes use of the primitives defined in [ID.irtfcfrghashtocurve] (more specifically of hash_to_curve and expand_message) to hash a predefined seed to a set of generators. Those primitives are implicitly defined by the ciphersuite, through the choice of a hashtocurve suite (see the hash_to_curve_suite parameter in Section 6.1). *NOTE*: The hash_to_generators operation ignores the PK input, creating the same generators across different Signers and signatures. The final create_generators operation defined by the ciphersuites in Section 6, will be, create_generators(count, PK) := hash_to_generator(count) Since hash_to_generator creates constant points, as an optimization, implementations MAY cache its result for a specific count (which can be arbitrarily large, depending on the application). Care must be taken, to guarantee that the generators will be fetched from the cache in the same order they had when they where created (i.e., an application should not short or in any way rearrange the cached generators). Looker, et al. Expires 11 January 2024 [Page 21] InternetDraft The BBS Signature Scheme July 2023 generators = hash_to_generators(count) Inputs:  count (REQUIRED), unsigned integer. Number of generators to create. Parameters:  hash_to_curve_g1, the hash_to_curve operation for the G1 subgroup, defined by the suite specified by the hash_to_curve_suite parameter of the ciphersuite.  expand_message, the expand_message operation defined by the suite specified by the hash_to_curve_suite parameter of the ciphersuite.  generator_seed, an octet string representing the seed from which the generators are created, defined by the ciphersuite. Definitions:  seed_dst, an octet string representing the domain separation tag: ciphersuite_id  "SIG_GENERATOR_SEED_" where ciphersuite_id is defined by the ciphersuite and "SIG_GENERATOR_SEED_" is an ASCII string comprised of 19 bytes.  generator_dst, an octet string representing the domain separation tag: ciphersuite_id  "SIG_GENERATOR_DST_", where ciphersuite_id is defined by the ciphersuite and "SIG_GENERATOR_DST_" is an ASCII string comprised of 18 bytes.  expand_len, defined by the ciphersuite. Outputs:  generators, an array of generators. ABORT if: 1. count > 2^64  1 Procedure: 1. v = expand_message(generator_seed, seed_dst, expand_len) 2. for i in range(1, count): 3. v = expand_message(v  I2OSP(i, 8), seed_dst, expand_len) 4. generator_i = hash_to_curve_g1(v, generator_dst) 5. return (generator_1, ..., generator_count) Looker, et al. Expires 11 January 2024 [Page 22] InternetDraft The BBS Signature Scheme July 2023 The value of v MAY also be cached in order to efficiently extend an existing list of cached generator points. The CREATE_GENERATORS_ID of the above operation is define as, CREATE_GENERATORS_ID = "H2G_" 4.2.2. Defining new ways to create generators When defining a new create_generators procedure, the most important property is that the returned points are pseudorandomly chosen from the G1 group, given reasonable assumptions and cryptographic primitives. More specifically, the required properties are * The returned points should be indistinguishable from count uniformly radom points of G1. This means that given only the points H_1, ..., H_i it should be infeasible to guess H_(i+1) (or any H_j with j > i), for any i between 1 and count. * The returned points must be unique with very high probability, that would not lessen the targeted security level of the ciphersuite. Specifically, for a security level k, the probability of a collision should be at least 1/2^k. * It should be infeasible to guess the discrete logarithm of the returned points, for any base, even with knowledge of the public parameters that were used to create those generators (like the generator_seed value in Hash to Generators (#hashtogenerators)). Note that pseudo randomness does not necessarily imply this property. For example, an implementation that repeatably hashes a public seed value to create exponents r_1, r_2, ..., r_count (where r_1 = hash(seed), r_2 = hash(r_1), ...) and then returns the points H_1 = P1 * r_1, H_2 = P_1 * r_2, ..., H_count = P_1 * r_count would be insecure (given knowledge of the seed), but given knowledge of only the points H_1, ..., H_count, the sequence would appear random. * The returned points must be different from the Identity point of G1 as well as the constant point P1 defined by the ciphersuite. * Must be constant time for a specific count value. * Must be deterministic. * Must use proper domain separation for both the create_generators procedure, as well as all of the internallycalled procedures. 4.3. Messages to Scalars The messages_to_scalars operation is used to map a list of input_messages (where each input_message can be either an octet string or a scalar value, as defined in Terminology (#terminology)) to their respective scalar values, which are required by the Sign (#signaturegenerationsign), Verify (#signatureverification verify), ProofGen (#proofgenerationproofgen) and ProofVerify Looker, et al. Expires 11 January 2024 [Page 23] InternetDraft The BBS Signature Scheme July 2023 (#proofverificationproofverify) procedures. This operation uses the map_to_scalar subroutine defined in Section 4.3.1, to transform each message to a scalar value. msg_scalar = messages_to_scalars(messages) Inputs:  messages (REQUIRED), a vector of input_messages. Parameters:  map_to_scalar, an operation that maps an input_message and its index to a scalar value, defined by the ciphersuite. Outputs:  msg_scalars, a list of scalars. ABORT if: 1. length(messages) > 2^64  1 Procedure: 1. L = length(messages) 2. for i in (1, ..., L): 3. msg_scalar_i = map_to_scalar(messages[i], i) 4. return (msg_scalar_1, ..., msg_scalar_L) 4.3.1. Map to Scalar As defined above, the messages_to_scalars operation works by repeatedly calling the map_to_scalar operation, that will be defined by the ciphersuite. The map_to_scalar operation accepts the following inputs, * message (REQUIRED), an input_message that can be either a scalar or an octet string (see Terminology (#terminology)). * index (OPTIONAL), a positive integer. The index the message has in the list of signed messages. The signature of the operation is the following, msg_scalar = map_to_scalar(msg, index) Looker, et al. Expires 11 January 2024 [Page 24] InternetDraft The BBS Signature Scheme July 2023 Every map_to_scalar operation MUST define a unique MAP_TO_SCALAR_ID value to be used by the ciphersuite. This value MUST only contain ASCII encoded characters with codes between 0x21 and 0x7e (inclusive) and MUST end with an underscore (ASCII code: 0x5f), other than the last character the string MUST not contain any other underscores (ASCII code: 0x5f). 4.3.1.1. Map to Scalar as Hash This document specifies the following map_to_scalar operation, called map_to_scalar_as_hash, that uses hash_to_scalar as defined in Section 4.4. Although for extendability reasons, the map_to_scalar operation accepts messages that can be either an octet string or a scalar value (as to support protocol specific preprocessing of a message), the map_to_scalar_as_hash operation used by this document only maps octet string to scalars and will abort if it gets an input_message that is already a scalar value. Additionally, the resulting scalar does not depend on the index of the message. scalar = map_to_scalar_as_hash(msg) Inputs:  msg (REQUIRED), an input_message Parameters:  dst = ciphersuite_id  "MAP_MSG_TO_SCALAR_AS_HASH_", where ciphersuite_id is defined by the ciphersuite. Outputs:  scalar, a scalar value. ABORT if: 1. msg not an octet string Procedure: 1. return hash_to_scalar(msg, dst) The map_to_scalar operation that will be defined by the ciphersuites of this document will be, map_to_scalar(msg, index) := map_to_scalar_as_hash(msg) Looker, et al. Expires 11 January 2024 [Page 25] InternetDraft The BBS Signature Scheme July 2023 The MAP_TO_SCALAR_ID of the map_to_scalar_as_hash operation is defines as, MAP_TO_SCALAR_ID = "HM2S_" 4.3.2. Define a new Map to Scalar To define different ways with which messages can be mapped to scalars, an application can define a new map_to_scalar operation, as part of a new ciphersuite. A new map_to_scalar function is REQUIRED to adhere to the following security rules: 1. It MUST return unique values for different msg inputs. More specifically, the probability of a collision under reasonable cryptographic assumptions MUST be at most 1/2^k, where k the security level of the targeted ciphersuite. 2. Different outputs MUST be independent. More specifically, knowledge of the scalar_1 = map_to_scalar(msg_1, idx_1), should not give any information on the value of scalar_2 = map_to_scalar(msg_2, idx_2), for any other (msg_2, idx_2) input pair. 3. It MUST be deterministic. 4.4. Hash to Scalar This operation describes how to hash an arbitrary octet string to n scalar values in the multiplicative group of integers mod r (i.e., values in the range [1, r1]). This procedure acts as a helper function, used internally in various places within the operations described in the spec. To hash a message to a scalar that would be passed as input to the Sign (#sisignaturegenerationsigngn), Verify (#signatureverificationverify), ProofGen (#proofgeneration proofgen) and ProofVerify (#proofverificationproofverify) functions, one must use MapMessageToScalarAsHash (#mapmessagetoscalar) instead. The operation takes as input an octet string representing the message to hash (msg), the number of the scalars to return (count) as well as an optional domain separation tag (dst). The length of the dst MUST be less than 255 octets. See section 5.3.3 of [ID.irtfcfrghashtocurve] for guidance on using larger dst values. If a dst is not supplied, its value MUST default to the octet string returned from ciphersuite_id  "H2S_", where ciphersuite_id is the octet string representing the unique ID of the ciphersuite and "H2S_" is an ASCII string comprised of 4 bytes. Looker, et al. Expires 11 January 2024 [Page 26] InternetDraft The BBS Signature Scheme July 2023 *Note* This operation makes use of expand_message defined in [ID.irtfcfrghashtocurve]. The operation expand_message may fail (abort). In that case, hash_to_scalar MUST also ABORT. hashed_scalar = hash_to_scalar(msg_octets, dst) Inputs:  msg_octets (REQUIRED), an octet string. The message to be hashed.  dst (OPTIONAL), an octet string representing a domain separation tag. If not supplied, it defaults to the octet string given by ciphersuite_id  "H2S_", where ciphersuite_id is defined by the ciphersuite. Parameters:  hash_to_curve_suite, the hash to curve suite id defined by the ciphersuite.  expand_message, the expand_message operation defined by the suite specified by the hash_to_curve_suite parameter.  expand_len, defined by the ciphersuite. Outputs:  hashed_scalar, a scalar. ABORT if:  length(dst) > 255 Procedure: 1. uniform_bytes = expand_message(msg_octets, dst, expand_len) 2. return OS2IP(uniform_bytes) mod r 4.5. Domain Calculation This operation calculates the domain value, a scalar representing the distillation of all essential contextual information for a signature. The same domain value must be calculated by all parties (the signer, the prover, and the verifier) for both the signature and proofs to be validated. The input to the domain value includes an octet string called the header, chosen by the signer and meant to encode any information that is required to be revealed by the prover (such as an expiration date, or an identifier for the target audience). This is in contrast to the signed message values, which may be withheld during a proof. Looker, et al. Expires 11 January 2024 [Page 27] InternetDraft The BBS Signature Scheme July 2023 When a signature is calculated, the domain value is combined with a specific generator point (Q_1, see Sign (#signaturegenerationsign)) to protect the integrity of the public parameters and the header. This operation makes use of the serialize function, defined in Section 4.6.1 (#serialize). domain = calculate_domain(PK, Q_1, H_Points, header) Inputs:  PK (REQUIRED), an octet string, representing the public key of the Signer of the form outputted by the SkToPk operation.  Q_1 (REQUIRED), point of G1 (the first point returned from create_generators).  H_Points (REQUIRED), array of points of G1.  header (OPTIONAL), an octet string. If not supplied, it must default to the empty octet string (""). Parameters:  ciphersuite_id, an octet string. The unique ID of the ciphersuite. Outputs:  domain, a scalar. Deserialization: 1. L = length(H_Points) 2. (H_1, ..., H_L) = H_Points ABORT if: 1. length(header) > 2^64  1 or L > 2^64  1 Procedure: 1. dom_array = (L, Q_1, H_1, ..., H_L) 2. dom_octs = serialize(dom_array)  ciphersuite_id 3. dom_input = PK  dom_octs  I2OSP(length(header), 8)  header 4. return hash_to_scalar(dom_input) Looker, et al. Expires 11 January 2024 [Page 28] InternetDraft The BBS Signature Scheme July 2023 *Note*: If the header is not supplied in calculate_domain, it defaults to the empty octet string (""). This means that in the concatenation step of the above procedure (step 3), 8 bytes representing a length of 0 (i.e., 0x0000000000000000), will still need to be appended at the end, even though a header value is not provided. 4.6. Challenge Calculation This operation calculates the challenge scalar value, used during ProofGen (#proofgenerationproofgen) and ProofVerify (#proof verificationproofverify), as part of the FiatShamir heuristic, for making the proof protocol noninteractive (in a interactive sating, the challenge would be a random value supplied by the verifier). This operation makes use of the serialize function, defined in Section 4.6.1 (#serialize). Looker, et al. Expires 11 January 2024 [Page 29] InternetDraft The BBS Signature Scheme July 2023 challenge = calculate_challenge(Abar, Bbar, C, i_array, msg_array, domain, ph) Inputs:  (Abar, Bbar, C) (REQUIRED), points of G1, as calculated in ProofGen.  i_array (REQUIRED), array of nonnegative integers (the indexes of the disclosed messages).  msg_array (REQUIRED), array of scalars (the disclosed messages after mapped to scalars).  domain (REQUIRED), a scalar.  ph (OPTIONAL), an octet string. If not supplied, it must default to the empty octet string (""). Outputs:  challenge, a scalar. Deserialization: 1. R = length(i_array) 2. (i1, ..., iR) = i_array 3. (msg_i1, ..., msg_iR) = msg_array ABORT if: 1. R > 2^64  1 or R != length(msg_array) 2. length(ph) > 2^64  1 Procedure: 1. c_arr = (Abar, Bbar, C, R, i1, ..., iR, msg_i1, ..., msg_iR, domain) 2. c_octs = serialize(c_array) 3. return hash_to_scalar(c_octs  I2OSP(length(ph), 8)  ph) *Note*: Similarly to the header value in Domain Calculation (#domain calculation), if the presentation header (ph) is not supplied in calculate_challenge, 8 bytes representing a length of 0 (i.e., 0x0000000000000000), must still be appended after the c_octs value, during the concatenation step of the above procedure (step 3). 4.7. Serialization Looker, et al. Expires 11 January 2024 [Page 30] InternetDraft The BBS Signature Scheme July 2023 4.7.1. Serialize This operation describes how to transform multiple elements of different types (i.e., elements that are not already in a octet string format) to a single octet string (see Section 3.2.3). The inputted elements can be points, scalars (see Terminology (#terminology)) or integers between 0 and 2^641. The resulting octet string will then either be used as an input to a hash function (i.e., in Sign (#signaturegenerationsign), ProofGen (#proof generationproofgen) etc.), or to serialize a signature or proof (see SignatureToOctets (#signaturetooctets) and ProofToOctets (#prooftooctets)). octets_result = serialize(input_array) Inputs:  input_array (REQUIRED), an array of elements to be serialized. Each element must be either a point of G1 or G2, a scalar, an ASCII string or an integer value between 0 and 2^64  1. Parameters:  octet_scalar_length, nonnegative integer. The length of a scalar octet representation, defined by the ciphersuite.  r, the prime order of the subgroups G1 and G2, defined by the ciphersuite.  point_to_octets_g*, operations that serialize a point of G1 or G2 to an octet string of fixed length, defined by the ciphersuite. Outputs:  octets_result, a scalar value or INVALID. Procedure: 1. let octets_result be an empty octet string. 2. for el in input_array: 3. if el is a point of G1: el_octs = point_to_octets_g1(el) 4. else if el is a point of G2: el_octs = point_to_octets_g2(el) 5. else if el is a scalar: el_octs = I2OSP(el, octet_scalar_length) 6. else if el is an integer between 0 and 2^64  1: 7. el_octs = I2OSP(el, 8) 8. else: return INVALID 9. octets_result = octets_result  el_octs 10. return octets_result Looker, et al. Expires 11 January 2024 [Page 31] InternetDraft The BBS Signature Scheme July 2023 4.7.2. Signature to Octets This operation describes how to encode a signature to an octet string. _Note_ this operation deliberately does not perform the relevant checks on the inputs A and e because its assumed these are done prior to its invocation, e.g as is the case with the Sign (#signature generationsign) operation. signature_octets = signature_to_octets(signature) Inputs:  signature (REQUIRED), a valid signature, in the form (A, e), where A is a point in G1 and e is a nonzero scalar mod r. Outputs:  signature_octets, an octet string or INVALID. Procedure: 1. (A, e) = signature 2. return serialize((A, e)) 4.7.3. Octets to Signature This operation describes how to decode an octet string, validate it and return the underlying components that make up the signature. Looker, et al. Expires 11 January 2024 [Page 32] InternetDraft The BBS Signature Scheme July 2023 signature = octets_to_signature(signature_octets) Inputs:  signature_octets (REQUIRED), an octet string of the form output from signature_to_octets operation. Outputs: signature, a signature in the form (A, e), where A is a point in G1 and e is a nonzero scalar mod r. Procedure: 1. expected_len = octet_point_length + octet_scalar_length 2. if length(signature_octets) != expected_len, return INVALID 3. A_octets = signature_octets[0..(octet_point_length  1)] 4. A = octets_to_point_g1(A_octets) 5. if A is INVALID, return INVALID 6. if A == Identity_G1, return INVALID 7. index = octet_point_length 8. end_index = index + octet_scalar_length  1 9. e = OS2IP(signature_octets[index..end_index]) 10. if e = 0 OR e >= r, return INVALID 11. return (A, e) 4.7.4. Proof to Octets This operation describes how to encode a proof, as computed at step 25 in ProofGen (#proofgenerationproofgen), to an octet string. The input to the operation MUST be a valid proof. The inputted proof value must consist of the following components, in that order: 1. Two (2) valid points of the G1 subgroup, different from the identity point of G1 (i.e., Abar, Bbar, in ProofGen) 2. Three (3) integers representing scalars in the range of 1 to r1 inclusive (i.e., c, r2^, r3^, in ProofGen). 3. A number of integers representing scalars in the range of 1 to r1 inclusive, corresponding to the undisclosed from the proof messages (i.e., m^_j1, ..., m^_jU, in ProofGen, where U the number of undisclosed messages). Looker, et al. Expires 11 January 2024 [Page 33] InternetDraft The BBS Signature Scheme July 2023 proof_octets = proof_to_octets(proof) Inputs:  proof (REQUIRED), a BBS proof in the form calculated by ProofGen in step 27 (see above). Parameters:  octet_scalar_length (REQUIRED), nonnegative integer. The length of a scalar octet representation, defined by the ciphersuite. Outputs:  proof_octets, an octet string or INVALID. Procedure: 1. (Abar, Bbar, r2^, r3^, (m^_1, ..., m^_U), c) = proof 2. return serialize((Abar, Bbar, r2^, r3^, m^_1, ..., m^_U, c)) 4.7.5. Octets to Proof This operation describes how to decode an octet string representing a proof, validate it and return the underlying components that make up the proof value. The proof value outputted by this operation consists of the following components, in that order: 1. Two (2) valid points of the G1 subgroup, each of which must not equal the identity point. 2. Two (2) integers representing scalars in the range of 1 to r1 inclusive. 3. A set of integers representing scalars in the range of 1 to r1 inclusive, corresponding to the undisclosed from the proof message commitments. This set can be empty (i.e., "()"). 4. One (1) integer representing a scalar in the range of 1 to r1 inclusive, corresponding to the proof's challenge (c). proof = octets_to_proof(proof_octets) Inputs:  proof_octets (REQUIRED), an octet string of the form outputted from the proof_to_octets operation. Looker, et al. Expires 11 January 2024 [Page 34] InternetDraft The BBS Signature Scheme July 2023 Parameters:  r (REQUIRED), nonnegative integer. The prime order of the G1 and G2 groups, defined by the ciphersuite.  octet_scalar_length (REQUIRED), nonnegative integer. The length of a scalar octet representation, defined by the ciphersuite.  octet_point_length (REQUIRED), nonnegative integer. The length of a point in G1 octet representation, defined by the ciphersuite. Outputs:  proof, a proof value in the form described above or INVALID Procedure: 1. proof_len_floor = 2 * octet_point_length + 3 * octet_scalar_length 2. if length(proof_octets) < proof_len_floor, return INVALID // Points (i.e., (Abar, Bbar) in ProofGen) deserialization. 3. index = 0 4. for i in range(0, 1): 5. end_index = index + octet_point_length  1 6. A_i = octets_to_point_g1(proof_octets[index..end_index]) 7. if A_i is INVALID or Identity_G1, return INVALID 8. index += octet_point_length // Scalars (i.e., (r2^, r3^, m^_j1, ..., m^_jU, c) in // ProofGen) deserialization. 9. j = 0 10. while index < length(proof_octets): 11. end_index = index + octet_scalar_length  1 12. s_j = OS2IP(proof_octets[index..end_index]) 13. if s_j = 0 or if s_j >= r, return INVALID 14. index += octet_scalar_length 15. j += 1 16. if index != length(proof_octets), return INVALID 17. msg_commitments = () 18. If j > 3, set msg_commitments = (s_2, ..., s_(j2)) 19. return (A_0, A_1, s_0, s_1, msg_commitments, s_(j1)) Looker, et al. Expires 11 January 2024 [Page 35] InternetDraft The BBS Signature Scheme July 2023 4.7.6. Octets to Public Key This operation describes how to decode an octet string representing a public key, validates it and returns the corresponding point in G2. Steps 2 to 5 check if the public key is valid. As an optimization, implementations MAY cache the result of those steps, to avoid unnecessarily repeating validation for known public keys. W = octets_to_pubkey(PK) Inputs:  PK, an octet string. A public key in the form outputted by the SkToPK operation Outputs:  W, a valid point in G2 or INVALID Procedure: 1. W = octets_to_point_g2(PK) 2. If W is INVALID, return INVALID 3. if subgroup_check(W) is INVALID, return INVALID 4. If W == Identity_G2, return INVALID 5. return W 5. Security Considerations 5.1. Validating Public Keys It is RECOMENDED for any operation in Core Operations (#core operations) involving public keys, that they deserialize the public key first using the OctetsToPublicKey (#octetstopublickey) operation, even if they only require the octetstring representation of the public key. If the octets_to_pubkey procedure (see the OctetsToPublicKey (#octetstopublickey) section) returns INVALID, the calling operation should also return INVALID and abort. An example of where this recommendation applies is the Sign (#sign) operation. An example of where an explicit invocation to the octets_to_pubkey operation is already defined and therefore required is the Verify (#signatureverificationverify) operation. Looker, et al. Expires 11 January 2024 [Page 36] InternetDraft The BBS Signature Scheme July 2023 5.2. Point Deserialization This document makes use of octet_to_point_g* to parse octet strings to elliptic curve points (either in G1 or G2). It is assumed (even if not explicitly described) that the result of this operation will not be INVALID. If octet_to_point_g* returns INVALID, then the calling operation should immediately return INVALID as well and abort the operation. Note that the only place where the output is assumed to be VALID implicitly is in the EncodingForHash (#encodingforhash) section. 5.3. Skipping Membership Checks Some existing implementations skip the subgroup_check invocation in Verify (#signatureverificationverify), whose purpose is ensuring that the signature is an element of a primeorder subgroup. This check is REQUIRED of conforming implementations, for two reasons. 1. For most pairingfriendly elliptic curves used in practice, the pairing operation e Section 1.2 is undefined when its input points are not in the primeorder subgroups of E1 and E2. The resulting behavior is unpredictable, and may enable forgeries. 2. Even if the pairing operation behaves properly on inputs that are outside the correct subgroups, skipping the subgroup check breaks the strong unforgeability property [ADR02]. 5.4. Side Channel Attacks Implementations of the signing algorithm SHOULD protect the secret key from sidechannel attacks. One method for protecting against certain sidechannel attacks is ensuring that the implementation executes exactly the same sequence of instructions and performs exactly the same memory accesses, for any value of the secret key. In other words, implementations on the underlying pairingfriendly elliptic curve SHOULD run in constant time. 5.5. Randomness Considerations The IKM input to KeyGen MUST be infeasible to guess and MUST be kept secret. One possibility is to generate IKM from a trusted source of randomness. Guidelines on constructing such a source are outside the scope of this document. Secret keys MAY be generated using other methods; in this case they MUST be infeasible to guess and MUST be indistinguishable from uniformly random modulo r. Looker, et al. Expires 11 January 2024 [Page 37] InternetDraft The BBS Signature Scheme July 2023 BBS proofs are nondeterministic, meaning care must be taken against attacks arising from using bad randomness, for example, the nonce reuse attack on ECDSA [HDWH12]. It is RECOMMENDED that the presentation header used in this specification contain a nonce chosen at random from a trusted source of randomness, see the Section 5.6 for additional considerations. When a trusted source of randomness is used, signatures and proofs are much harder to forge or break due to the use of multiple nonces. 5.6. Presentation Header Selection The signature proofs of knowledge generated in this specification are created using a specified presentation header. A verifierspecified cryptographically random value (e.g., a nonce) featuring in the presentation header provides strong protections against replay attacks, and is RECOMMENDED in most use cases. In some settings, proofs can be generated in a noninteractive fashion, in which case verifiers MUST be able to verify the uniqueness of the presentation header values. 5.7. Implementing hash_to_curve_g1 The security analysis models hash_to_curve_g1 as random oracles. It is crucial that these functions are implemented using a cryptographically secure hash function. For this purpose, implementations MUST meet the requirements of [ID.irtfcfrghashtocurve]. In addition, ciphersuites MUST specify unique domain separation tags for hash_to_curve. Some guidance around defining this can be found in Section 6. 5.8. Choice of Underlying Curve BBS signatures can be implemented on any pairingfriendly curve. However care MUST be taken when selecting one that is appropriate, this specification defines a ciphersuite for using the BLS12381 curve in Section 6 which as a curve achieves around 117 bits of security according to a recent NCC ZCash cryptography review [ZCASHREVIEW]. Looker, et al. Expires 11 January 2024 [Page 38] InternetDraft The BBS Signature Scheme July 2023 5.9. ProofGen Security The proof, as returned by ProofGen, is a zeroknowledge proofof knowledge [CDL16]. This guarantees that no information will be revealed about the signature itself or the undisclosed messages, from the output of ProofGen. Note that the security proofs in [CDL16] work on type 3 pairing setting. This means that G1 should be different from G2 and with no efficient isomorphism between them. 5.10. Randomness Requirements ProofGen (#proofgenerationproofgen) is by its nature a randomized algorithm, requiring the generation of multiple uniformly distributed, pseudo random scalars. This makes ProofGen vulnerable to bad entropy in certain applications. As an example of such application, consider systems that need to monitor and potentially restrict outbound traffic, in order to minimize data leakage during a breach. In such cases, the attacker could manipulate couple of bits in the output of the get_random function to create an undetected chanel out of the system. Although the applicability of such attacks is limited for most of the targeted use cases of the BBS scheme, some applications may want to take measures towards mitigating them. To that end, it is RECOMMENDED to use a deterministic RNG (like a ChaCha20 based deterministic RNG), seeded with a unique, uniformly random, single seed [DRBG]. This will limit the amount of bits the attacker can manipulate (note that some randomness is always needed). In any case, the randomness used in ProofGen MUST be unique in each call and MUST have a distribution that is indistinguishable from uniform. If the random scalars are reused, are created from "bad randomness" (for example with a known relationship to each other) or are in any way predictable, an adversary will be able to unveil the undisclosed from the proof messages or the hidden signature value. Naturally, a cryptographically secure pseudorandom number generator or pseudo random function is REQUIRED to implement the get_random functionality. See also [RFC8937], for recommendations on generating good randomness in cases where the Prover has direct or indirect access to a secret key. 6. Ciphersuites This section defines the format for a BBS ciphersuite. It also gives concrete ciphersuites based on the BLS12381 pairingfriendly elliptic curve [ID.irtfcfrgpairingfriendlycurves]. Looker, et al. Expires 11 January 2024 [Page 39] InternetDraft The BBS Signature Scheme July 2023 6.1. Ciphersuite Format 6.1.1. Ciphersuite ID The following section defines the format of the unique identifier for the ciphersuite denoted ciphersuite_id, which will be represented as an ASCII encoded octet string. The REQUIRED format for this string is "BBS_"  H2C_SUITE_ID  CG_ID  MESSAGES_TO_SCALARS_ID  ADD_INFO * H2C_SUITE_ID is the suite ID of the hashtocurve suite used to define the hash_to_curve function. * CG_ID is the ID of the create generators used, i.e., CREATE_GENERATORS_ID as defined in the Section 4.2 section. * MAP_TO_SCALAR_ID is the ID of the map_to_scalar operation, as defined in Section 4.3.1. * ADD_INFO is an optional octet string indicating any additional information used to uniquely qualify the ciphersuite. When present this value MUST only contain ASCII encoded characters with codes between 0x21 and 0x7e (inclusive) and MUST end with an underscore (ASCII code: 0x5f), other than the last character the string MUST not contain any other underscores (ASCII code: 0x5f). 6.1.2. Additional Parameters The parameters that each ciphersuite needs to define are generally divided into three main categories; the basic parameters (a hash function etc.,), the serialization operations (point_to_octets_g1 etc.,) and the generator parameters. See below for more details. *Basic parameters*: * hash: a cryptographic hash function. * octet_scalar_length: Number of bytes to represent a scalar value, in the multiplicative group of integers mod r, encoded as an octet string. It is RECOMMENDED this value be set to ceil(log2(r)/8). * octet_point_length: Number of bytes to represent a point encoded as an octet string outputted by the point_to_octets_g* function. It is RECOMMENDED that this value is set to ceil(log2(p)/8). Looker, et al. Expires 11 January 2024 [Page 40] InternetDraft The BBS Signature Scheme July 2023 * hash_to_curve_suite: The hashtocurve ciphersuite id, in the form defined in [ID.irtfcfrghashtocurve]. This defines the hash_to_curve_g1 (the hash_to_curve operation for the G1 subgroup, see the Notation (#notation) section) and the expand_message (either expand_message_xmd or expand_message_xof) operations used in this document. * expand_len: Must be defined to be at least ceil((ceil(log2(r))+k)/8), where log2(r) and k are defined by each ciphersuite (see Section 5 in [ID.irtfcfrghashtocurve] for a more detailed explanation of this definition). * P1: A fixed point in the G1 subgroup, different from the point BP1 (i.e., the base point of G1, see Section 1.1). This leaves the base point "free", to be used with other protocols, like key commitment and proof of possession schemes (for example, like the one described in Section 3.3 of [ID.irtfcfrgblssignature]). *Serialization functions*: * point_to_octets_g1: a function that returns the canonical representation of the point P for the G1 subgroup as an octet string. * point_to_octets_g2: a function that returns the canonical representation of the point P for the G2 subgroup as an octet string. * octets_to_point_g1: a function that returns the point P in the subgroup G1 corresponding to the canonical representation ostr, or INVALID if ostr is not a valid output of point_to_octets_g1. * octets_to_point_g2: a function that returns the point P in the subgroup G2 corresponding to the canonical representation ostr, or INVALID if ostr is not a valid output of point_to_octets_g2. *Generator parameters*: * create_generators: the operation with which to create a set of generators. See Section 4.2. *Map to Scalar function* * map_to_scalars: a function that maps a message to a scalars value, as defined in Section 4.3.1. Looker, et al. Expires 11 January 2024 [Page 41] InternetDraft The BBS Signature Scheme July 2023 6.2. BLS12381 Ciphersuites The following two ciphersuites are based on the BLS12381 elliptic curves defined in Section 4.2.1 of [ID.irtfcfrgpairingfriendlycurves]. The targeted security level of both suites in bits is k = 128. The number of bits of the order r, of the G1 and G2 subgroups, is log2(r) = 255. The base points BP1 and BP2 of G1 and G2 are the points BP and BP' correspondingly, as defined in Section 4.2.1 of [ID.irtfcfrgpairingfriendlycurves]. The first ciphersuite makes use of an extendable output function, and most specifically of SHAKE256, as defined in Section 6.2 of [SHA3]. It also uses the hashtocurve suite defined by this document in Appendix A.1 (#bls12381hash_to_curvedef), which also makes use of the SHAKE256 function. The second ciphersuite uses SHA256, as defined in Section 6.2 of [SHA2] and the BLS12381 G1 hashtocurve suite defined in Section 8.8.1 of the [ID.irtfcfrghashtocurve] document. Note that these two ciphersuites differ only in the hash function (SHAKE256 vs SHA256) and in the hashtocurve suites used. The hashtocurve suites differ in the expand_message variant and underlying hash function. More concretely, the BLS12381SHAKE256 (#bls12381shake256) ciphersuite makes use of expand_message_xof with SHAKE256, while BLS12381SHA256 (#bls12381sha256) makes use of expand_message_xmd with SHA256. Curve parameters are common between the two ciphersuites. 6.2.1. BLS12381SHAKE256 *Basic parameters*: * ciphersuite_id: "BBS_BLS12381G1_XOF:SHAKE256_SSWU_RO_H2G_HM2S_" * hash: SHAKE256 as defined in [SHA3]. * octet_scalar_length: 32, based on the RECOMMENDED approach of ceil(log2(r)/8). * octet_point_length: 48, based on the RECOMMENDED approach of ceil(log2(p)/8). * hash_to_curve_suite: "BLS12381G1_XOF:SHAKE256_SSWU_RO_" as defined in Appendix A.1 (#bls12381hashtocurvedefinition usingshake256) for the G1 subgroup. * expand_len: 48 ( = ceil((ceil(log2(r))+k)/8)) Looker, et al. Expires 11 January 2024 [Page 42] InternetDraft The BBS Signature Scheme July 2023 * P1: The G1 point returned from the hash_to_generators procedure (Section 4.2.1), with count = 1 and generator_seed = ciphersuite_id  "BP_MESSAGE_GENERATOR_SEED". More specifically, P1 = "8929dfbc7e6642c4ed9cba0856e493f8b9d7d5fcb0c31ef8fdcd34d50648a56c795e106 e9eada6e0bda386b414150755" *Serialization functions*: * point_to_octets_g1: follows the format documented in Appendix C section 1 of [ID.irtfcfrgpairingfriendlycurves] for the G1 subgroup, using compression (i.e., setting C_bit = 1). * point_to_octets_g2: follows the format documented in Appendix C section 1 of [ID.irtfcfrgpairingfriendlycurves] for the G2 subgroup, using compression (i.e., setting C_bit = 1). * octets_to_point_g1: follows the format documented in Appendix C section 2 of [ID.irtfcfrgpairingfriendlycurves] for the G1 subgroup. * octets_to_point_g2: follows the format documented in Appendix C section 2 of [ID.irtfcfrgpairingfriendlycurves] for the G2 subgroup. *Generator parameters*: * create_generators: the operation is using hash_to_generators as defined in Section 4.2.1, with generator_seed = ciphersuite_id  "MESSAGE_GENERATOR_SEED" and the expand_message and hash_to_curve_g1 defined by the hash_to_curve_suite, create_generators(count, PK) := hash_to_generators(count) *Map to Scalar function*: * map_to_scalar: map_to_scalar_as_hash (Section 4.3.1.1) 6.2.2. BLS12381SHA256 *Basic parameters*: * Ciphersuite_ID: "BBS_BLS12381G1_XMD:SHA256_SSWU_RO_H2G_HM2S_" * hash: SHA256 as defined in [SHA2]. * octet_scalar_length: 32, based on the RECOMMENDED approach of ceil(log2(r)/8). Looker, et al. Expires 11 January 2024 [Page 43] InternetDraft The BBS Signature Scheme July 2023 * octet_point_length: 48, based on the RECOMMENDED approach of ceil(log2(p)/8). * hash_to_curve_suite: "BLS12381G1_XMD:SHA256_SSWU_RO_" as defined in Section 8.8.1 of the [ID.irtfcfrghashtocurve] for the G1 subgroup. * expand_len: 48 ( = ceil((ceil(log2(r))+k)/8)) * P1: The G1 point returned from the hash_to_generators procedure, with count = 1 and generator_seed = ciphersuite_id  "BP_MESSAGE_GENERATOR_SEED". More specifically, P1 = "a8ce256102840821a3e94ea9025e4662b205762f9776b3a766c872b948f1fd225e7c596 98588e70d11406d161b4e28c9" *Serialization functions*: * point_to_octets_g1: follows the format documented in Appendix C section 1 of [ID.irtfcfrgpairingfriendlycurves] for the G1 subgroup, using compression (i.e., setting C_bit = 1). * point_to_octets_g2: follows the format documented in Appendix C section 1 of [ID.irtfcfrgpairingfriendlycurves] for the G2 subgroup, using compression (i.e., setting C_bit = 1). * octets_to_point_g1: follows the format documented in Appendix C section 2 of [ID.irtfcfrgpairingfriendlycurves] for the G1 subgroup. * octets_to_point_g2: follows the format documented in Appendix C section 2 of [ID.irtfcfrgpairingfriendlycurves] for the G2 subgroup. *Generator parameters*: * create_generators: the operation is using hash_to_generators as defined in Section 4.2.1, with generator_seed = ciphersuite_id  "MESSAGE_GENERATOR_SEED" and the expand_message and hash_to_curve_g1 defined by the hash_to_curve_suite, create_generators(count, PK) := hash_to_generators(count) *Map to Scalar function*: * map_to_scalar: map_to_scalar_as_hash (Section 4.3.1.1) Looker, et al. Expires 11 January 2024 [Page 44] InternetDraft The BBS Signature Scheme July 2023 7. Test Vectors The following section details a basic set of test vectors that can be used to confirm an implementations correctness *NOTE* All binary data below is represented as octet strings in big endian order, encoded in hexadecimal format. *NOTE* These fixtures are a work in progress and subject to change. 7.1. Mocked Random Scalars For the purpose of presenting fixtures for the ProofGen (#proof generationproofgen) operation we describe here a way to mock the calculate_random_scalars operation (Random scalars computation (#randomscalars)), used by ProofGen to create all the necessary random scalars. To that end, the seeded_random_scalars(SEED) operation is defined, which will deterministically calculate count randomlooking scalars from a single SEED. The proof test vector will then define a SEED (as a nothingupmysleeve value) and set mocked_calculate_random_scalars(count) := seeded_random_scalars(SEED, count) The mocked_calculate_random_scalars operation will then be used in place of calculate_random_scalars during the ProofGen (#proof generationproofgen) operation's procedure. *Note* For the BLS12381SHA256 (#bls12381sha256) ciphersuite if more than 170 mocked random scalars are required, the operation will return INVALID. Similarly, for the BLS12381SHAKE256 (#bls12381 shake256) ciphersuite, if more than 1365 mocked random scalars are required, the operation will return INVALID. For the purpose of describing ProofGen (#proofgenerationproofgen) test vectors, those limits are inconsequential. Looker, et al. Expires 11 January 2024 [Page 45] InternetDraft The BBS Signature Scheme July 2023 seeded_scalars = seeded_random_scalars(SEED, count) Inputs:  count (REQUIRED), non negative integer. The number of scalars to return.  SEED (REQUIRED), an octet string. The random seed from which to generate the scalars. Parameters:  expand_message, the expand_message operation defined by the ciphersuite.  expand_len, defined by the ciphersuite.  dst = ciphersuite_id  "MOCK_RANDOM_SCALARS_DST_", where ciphersuite_id is defined by the ciphersuite. Outputs:  mocked_random_scalars, a list of "count" pseudo random scalars ABORT if: 1. count * expand_len > 65535 Procedure: 1. out_len = expand_len * count 2. v = expand_message(SEED, dst, out_len) 3. if v is INVALID, return INVALID 4. for i in (1, ..., count): 5. start_idx = (i1) * expand_len 6. end_idx = i * expand_len  1 7. r_i = OS2IP(v[start_idx..end_idx]) mod r 8. return (r_1, ...., r_count) 7.2. Messages The following messages are used by the test vectors of both ciphersuites (unless otherwise stated). All the listed messages represent hexencoded octet strings. Looker, et al. Expires 11 January 2024 [Page 46] InternetDraft The BBS Signature Scheme July 2023 "9872ad089e452c7b6e283dfac2a80d58e8d0ff71cc4d5e310a1debdda4a45f02" "c344136d9ab02da4dd5908bbba913ae6f58c2cc844b802a6f811f5fb075f9b80" "7372e9daa5ed31e6cd5c825eac1b855e84476a1d94932aa348e07b73" "77fe97eb97a1ebe2e81e4e3597a3ee740a66e9ef2412472c" "496694774c5604ab1b2544eababcf0f53278ff50" "515ae153e22aae04ad16f759e07237b4" "d183ddc6e2665aa4e2f088af" "ac55fb33a75909ed" "96012096" "" 7.3. BLS12381SHAKE256 Test Vectors Test vectors of the BLS12381SHAKE256 (#bls12381shake 256ciphersuite) ciphersuite. Further fixtures are available in additional BLS12381SHAKE256 test vectors (#additionalbls12381 shake256ciphersuitetestvectors). 7.3.1. Key Pair The following key pair will be used for the test vectors of the BLS12381SHAKE256 (#bls12381shake256ciphersuite) ciphersuite. Following the procedure defined in Section 3.3.1 with an input key_material value as follows "746869732d49532d6a7573742d616e2d546573742d494b4d2d746f2d67656e657261746 52d246528724074232d6b6579" and the following key_info value "746869732d49532d736f6d652d6b65792d6d657461646174612d746f2d62652d7573656 42d696e2d746573742d6b65792d67656e" Outputs the following SK value "2eee0f60a8a3a8bec0ee942bfd46cbdae9a0738ee68f5a64e7238311cf09a079" Looker, et al. Expires 11 January 2024 [Page 47] InternetDraft The BBS Signature Scheme July 2023 Following the procedure defined in Section 3.3.2 with an input SK value as above produces the following PK value "92d37d1d6cd38fea3a873953333eab23a4c0377e3e049974eb62bd45949cdeb18fb0490 edcd4429adff56e65cbce42cf188b31bddbd619e419b99c2c41b38179eb001963bc3deca ae0d9f702c7a8c004f207f46c734a5eae2e8e82833f3e7ea5" 7.3.2. Map Messages to Scalars The messages in Section 7.2 are mapped to scalars during the Sign, Verify, ProofGen and ProofVerify operations. Presented below, are the output scalar values of the messages_to_scalars operation (Section 4.3), on input the messages defined in Section 7.2, using the map_to_scalar_as_hash operation (Section 4.3.1.1) as defined by the BLS12381SHAKE256 (#bls12381shake256ciphersuite) ciphersuite. Each output scalar value is encoded to octets using I2OSP and represented in big endian order, "1e0dea6c9ea8543731d331a0ab5f64954c188542b33c5bbc8ae5b3a830f2d99f" "3918a40fb277b4c796805d1371931e08a314a8bf8200a92463c06054d2c56a9f" "6642b981edf862adf34214d933c5d042bfa8f7ef343165c325131e2ffa32fa94" "33c021236956a2006f547e22ff8790c9d2d40c11770c18cce6037786c6f23512" "52b249313abbe323e7d84230550f448d99edfb6529dec8c4e783dbd6dd2a8471" "2a50bdcbe7299e47e1046100aadffe35b4247bf3f059d525f921537484dd54fc" "0e92550915e275f8cfd6da5e08e334d8ef46797ee28fa29de40a1ebccd9d95d3" "4c28f612e6c6f82f51f95e1e4faaf597547f93f6689827a6dcda3cb94971d356" "1db51bedc825b85efe1dab3e3ab0274fa82bbd39732be3459525faf70f197650" "27878da72f7775e709bb693d81b819dc4e9fa60711f4ea927740e40073489e78" 7.3.3. Message Generators Following the procedure defined in Section 4.2 with an input count value of 11, for the BLS12381SHAKE256 (#bls12381shake256) suite, outputs the following values (note that the first one corresponds to Q_1, while the next 10, to the message generators H_1, ..., H_10). Looker, et al. Expires 11 January 2024 [Page 48] InternetDraft The BBS Signature Scheme July 2023 "a9d40131066399fd41af51d883f4473b0dcd7d028d3d34ef17f3241d204e28507d7ecae 032afa1d5490849b7678ec1f8" "903c7ca0b7e78a2017d0baf74103bd00ca8ff9bf429f834f071c75ffe6bfdec6d6dca15 417e4ac08ca4ae1e78b7adc0e" "84321f5855bfb6b001f0dfcb47ac9b5cc68f1a4edd20f0ec850e0563b27d2accee6edff 1a26b357762fb24e8ddbb6fcb" "b3060dff0d12a32819e08da00e61810676cc9185fdd750e5ef82b1a9798c7d76d63de3b 6225d6c9a479d6c21a7c8bf93" "8f1093d1e553cdead3c70ce55b6d664e5d1912cc9edfdd37bf1dad11ca396a0a8bb0620 92d391ebf8790ea5722413f68" "990824e00b48a68c3d9a308e8c52a57b1bc84d1cf5d3c0f8c6fb6b1230e4e5b8eb752fb 374da0b1ef687040024868140" "b86d1c6ab8ce22bc53f625d1ce9796657f18060fcb1893ce8931156ef992fe56856199f 8fa6c998e5d855a354a26b0dd" "b4cdd98c5c1e64cb324e0c57954f719d5c5f9e8d991fd8e159b31c8d079c76a67321a30 311975c706578d3a0ddc313b7" "8311492d43ec9182a5fc44a75419b09547e311251fe38b6864dc1e706e29446cb3ea4d5 01634eb13327245fd8a574f77" "ac00b493f92d17837a28d1f5b07991ca5ab9f370ae40d4f9b9f2711749ca200110ce651 7dc28400d4ea25dddc146cacc" "965a6c62451d4be6cb175dec39727dc665762673ee42bf0ac13a37a74784fbd61e84e09 15277a6f59863b2bb4f5f6005" 7.3.4. Signature Fixtures 7.3.4.1. Valid Single Message Signature Using the following header "11223344556677889900aabbccddeeff" And the following message (the first message defined in Section 7.2) "9872ad089e452c7b6e283dfac2a80d58e8d0ff71cc4d5e310a1debdda4a45f02" Along with the SK value as defined in Section 7.3.1 as inputs into the Sign operations, yields the following output signature Looker, et al. Expires 11 January 2024 [Page 49] InternetDraft The BBS Signature Scheme July 2023 "98eb37fceb31115bf647f2983aef578ad895e55f7451b1add02fa738224cb89a31b148e ace4d20d001be31d162c58d12574f30e68665b6403956a83b23a16f1daceacce8c5fde25 d3defd52d6d5ff2e1" 7.3.4.2. Valid MultiMessage Signature Using the following header "11223344556677889900aabbccddeeff" And the messages defined in Section 7.2 (*Note* the ordering of the messages MUST be preserved), along with the SK value as defined in Section 7.3.1 as inputs into the Sign operations, yields the following output signature "97a296c83ed3626fe254d26021c5e9a087b580f1e8bc91bb51efb04420bfdaca215fe37 6a0bc12440bcc52224fb33c696cca9239b9f28dcddb7bd850aae9cd1a9c3e9f3639953fe 789dbba53b8f0dd6f" 7.3.5. Proof Fixtures For the generation of the following fixtures the mocked_calculate_random_scalars defined in Mocked Random Scalars (#mockedrandomscalars) is used, in place of the calculate_random_scalars operation, with the following seed value (hex encoding of the ASCIIencoded 30 first digits of pi) SEED = "332e313431353932363533353839373933323338343632363433333833323739" Given the above seed the first 10 scalars returned by the mocked_calculate_random_scalars operation will be, "1004262112c3eaa95941b2b0d1311c09c845db0099a50e67eda628ad26b43083" "6da7f145a94c1fa7f116b2482d59e4d466fe49c955ae8726e79453065156a9a4" "05017919b3607e78c51e8ec34329955d49c8c90e4488079c43e74824e98f1306" "4d451dad519b6a226bba79e11b44c441f1a74800eecfec6a2e2d79ea65b9d32d" "5e7e4894e6dbe68023bc92ef15c410b01f3828109fc72b3b5ab159fc427b3f51" "646e3014f49accb375253d268eb6c7f3289a1510f1e9452b612dd73a06ec5dd4" "363ecc4c1f9d6d9144374de8f1f7991405e3345a3ec49dd485a39982753c11a4" "12e592fe28d91d7b92a198c29afaa9d5329a4dcfdaf8b08557807412faeb4ac6" "513325acdcdec7ea572360587b350a8b095ca19bdd8258c5c69d375e8706141a" "6474fceba35e7e17365dde1a0284170180e446ae96c82943290d7baa3a6ed429" 7.3.5.1. Valid Single Message Proof Using the header, message and signature used in Valid Single Message Signature (#validsinglemessagesignature) to create a proof disclosing the message, with the following presentation header Looker, et al. Expires 11 January 2024 [Page 50] InternetDraft The BBS Signature Scheme July 2023 "bed231d880675ed101ead304512e043ade9958dd0241ea70b4b3957fba941501" will result to the following proof value "85c250f9a52faeb883ad9598aed05d31fe5861478d9f33b8de2deed1d92de5c0b0ef344 58e6cf8bad8caa0724fd3d3ca854abee98db3384e81a406d976643e239df0a924576eaf8 f4eec2885e9c688af7a52e4a752bef2c6f07d0a45611db3795d83d9cd71dfe8a62e3ad99 2e6327413baaea14c1de798c8929f9c6b1524bab54d0494dd5354d5a0770b79d2911bb65 91ce293e03a0d083bb81fc5bed8a44ff67386c0c33ddaaebf7d046849428fc6cf4d08815 fa39c94144c79ac50e86a0f5d" 7.3.5.2. Valid MultiMessage, All Messages Disclosed Proof Using the header, messages and signature used in Valid Multi Message Signature (#validmultimessagesignature) to create a proof disclosing all the messages, with the following presentation header "bed231d880675ed101ead304512e043ade9958dd0241ea70b4b3957fba941501" will result to the following proof value "94dfa4e26276f0ccf319b0ade65317e0bac41867aaebc73c7edc38673776cc6321dadd7 21920f5bd33f14be6dd101ec0b48f82f7ce8a8eb1d7cba2b93b66206bb7c3b5340e358be 39380c7a9f17083fa1bcdf9c4e5ba5927edfd01519189b7b33fa2b5bbb5baf963598694e 9f9c0c12e7aee29395e61a16129b43edaef245d5732bbc6e2e626ce241b8fdc60aea5532 f829ace9ed443a679b3e6ffd712ce67681537982406ba09ff6a1c6dee258fd22b3f9aa1f 28e19a83bbd1141f24171f380" 7.3.5.3. Valid MultiMessage, Half of Messages Disclosed Proof Using the same header, messages and signature as in MultiMessage, All Messages Disclosed Proof (#validmultimessageallmessages disclosedproof) but this time with only every other messages disclosed (messages in index 0, 2, 4 and 6, in that order), with the following presentation header "bed231d880675ed101ead304512e043ade9958dd0241ea70b4b3957fba941501" will result to the following proof value Looker, et al. Expires 11 January 2024 [Page 51] InternetDraft The BBS Signature Scheme July 2023 "ac0424b2a984c55d0061aa61df105f2c882d393494f3f4205d1e73f93c9c76b30664bae b3dc87f23fbf4035fb0a8e76b851dd39cecce8843e747ccf540f0850a30e1317f8897a56 c2d85bfc1e0b4dba1b0e0322d89aad4feb8b21c414a384a0128d65da028243bdab954c1d 6b4f3874ccafe69bb0900c0b8528d56dd9bd1d78b0c328022210ff9fe95276f79d232789 56a0898d974932bd90e6c79f7e970de6b637c7e6326540699080d39bd076a50095e031e9 80e68068e3e34a982ff4678c656db3c3b49df591ade6db848d7c2ddadf7e7d1db858848a 948f858f7fd59068c6b816607e5abd4f039bf2d1904fd7f89a1917023a1fc4862dbe8848 041da2e36271d76ad8b5e357ea3fd71ebc3617427a064256febf122773528023e4df1d25 900dc1ab19a563587c74a82495c59115263c51dcea106baa5f7f82c0b50e7756370f0470 cb4630d2a188309f28e1e0582c47a9ec76f864363835812984432a5253f079b3ede1b244 a809807ae2088deff841b93d0bca442e346b33d6b8aff8961" 7.4. BLS12381SHA256 Test Vectors Test vectors of the BLS12381SHA256 (#bls12381sha 256ciphersuite) ciphersuite. Further fixtures are available in additional BLS12381SHA256 test vectors (#additionalbls12381sha 256ciphersuitetestvectors). 7.4.1. Key Pair The following key pair will be used for the test vectors of the BLS12381SHA256 (#bls12381sha256ciphersuite) ciphersuite. Following the procedure defined in Section 3.3.1 with an input key_material value as follows "746869732d49532d6a7573742d616e2d546573742d494b4d2d746f2d67656e657261746 52d246528724074232d6b6579" and the following key_info value "746869732d49532d736f6d652d6b65792d6d657461646174612d746f2d62652d7573656 42d696e2d746573742d6b65792d67656e" Outputs the following SK value "60e55110f76883a13d030b2f6bd11883422d5abde717569fc0731f51237169fc" Following the procedure defined in Section 3.3.2 with an input SK value as above produces the following PK value "a820f230f6ae38503b86c70dc50b61c58a77e45c39ab25c0652bbaa8fa136f2851bd478 1c9dcde39fc9d1d52c9e60268061e7d7632171d91aa8d460acee0e96f1e7c4cfb12d3ff9 ab5d5dc91c277db75c845d649ef3c4f63aebc364cd55ded0c" Looker, et al. Expires 11 January 2024 [Page 52] InternetDraft The BBS Signature Scheme July 2023 7.4.2. Map Messages to Scalars The messages in Section 7.2 are mapped to scalars during the Sign, Verify, ProofGen and ProofVerify operations. Presented below, are the output scalar values of the messages_to_scalars operation (Section 4.3), on input the messages defined in Section 7.2, using the map_to_scalar_as_hash operation (Section 4.3.1.1) as defined by the BLS12381SHA256 (#bls12381sha256ciphersuite) ciphersuite. Each output scalar value is encoded to octets using I2OSP and represented in big endian order, "4242535f424c53313233383147315f584d443a5348412d3235365f535357555f524f5f4 832475f484d32535f4d41505f4d53475f544f5f5343414c41525f41535f484153485f" The output scalars, encoded to octets using I2OSP and represented in big endian order, are the following, "1cb5bb86114b34dc438a911617655a1db595abafac92f47c5001799cf624b430" "154249d503c093ac2df516d4bb88b510d54fd97e8d7121aede420a25d9521952" "0c7c4c85cdab32e6fdb0de267b16fa3212733d4e3a3f0d0f751657578b26fe22" "4a196deafee5c23f630156ae13be3e46e53b7e39094d22877b8cba7f14640888" "34c5ea4f2ba49117015a02c711bb173c11b06b3f1571b88a2952b93d0ed4cf7e" "4045b39b83055cd57a4d0203e1660800fabe434004dbdc8730c21ce3f0048b08" "064621da4377b6b1d05ecc37cf3b9dfc94b9498d7013dc5c4a82bf3bb1750743" "34ac9196ace0a37e147e32319ea9b3d8cc7d21870d3c3ba071246859cca49b02" "57eb93f417c43200e9784fa5ea5a59168d3dbc38df707a13bb597c871b2a5f74" "08e3afeb2b4f2b5f907924ef42856616e6f2d5f1fb373736db1cca32707a7d16" 7.4.3. Message Generators Following the procedure defined in Section 4.2 with an input count value of 11, for the BLS12381SHA256 (#bls12381sha256) suite, outputs the following values (note that the first one corresponds to Q_1, while the next 10, to the message generators H_1, ..., H_10). Looker, et al. Expires 11 January 2024 [Page 53] InternetDraft The BBS Signature Scheme July 2023 "a9ec65b70a7fbe40c874c9eb041c2cb0a7af36ccec1bea48fa2ba4c2eb67ef7f9ecb17e d27d38d27cdeddff44c8137be" "98cd5313283aaf5db1b3ba8611fe6070d19e605de4078c38df36019fbaad0bd28dd090f d24ed27f7f4d22d5ff5dea7d4" "a31fbe20c5c135bcaa8d9fc4e4ac665cc6db0226f35e737507e803044093f37697a9d45 2490a970eea6f9ad6c3dcaa3a" "b479263445f4d2108965a9086f9d1fdc8cde77d14a91c856769521ad3344754cc5ce90d 9bc4c696dffbc9ef1d6ad1b62" "ac0401766d2128d4791d922557c7b4d1ae9a9b508ce266575244a8d6f32110d7b0b7557 b77604869633bb49afbe20035" "b95d2898370ebc542857746a316ce32fa5151c31f9b57915e308ee9d1de7db69127d919 e984ea0747f5223821b596335" "8f19359ae6ee508157492c06765b7df09e2e5ad591115742f2de9c08572bb2845cbf03f d7e23b7f031ed9c7564e52f39" "abc914abe2926324b2c848e8a411a2b6df18cbe7758db8644145fefb0bf0a2d558a8c99 46bd35e00c69d167aadf304c1" "80755b3eb0dd4249cbefd20f177cee88e0761c066b71794825c9997b551f24051c35256 7ba6c01e57ac75dff763eaa17" "82701eb98070728e1769525e73abff1783cedc364adb20c05c897a62f2ab2927f86f118 dcb7819a7b218d8f3fee4bd7f" "a1f229540474f4d6f1134761b92b788128c7ac8dc9b0c52d59493132679673032ac7db3 fb3d79b46b13c1c41ee495bca" 7.4.4. Signature Fixtures 7.4.4.1. Valid Single Message Signature Using the following header "11223344556677889900aabbccddeeff" And the following message (the first message defined in Section 7.2) "9872ad089e452c7b6e283dfac2a80d58e8d0ff71cc4d5e310a1debdda4a45f02" Along with the SK value as defined in Section 7.3.1 as inputs into the Sign operations, yields the following output signature Looker, et al. Expires 11 January 2024 [Page 54] InternetDraft The BBS Signature Scheme July 2023 "88c0eb3bc1d97610c3a66d8a3a73f260f95a3028bccf7fff7d9851e2acd9f3f32fdf58a 5b34d12df8177adf37aa318a20f72be7d37a8e8d8441d1bc0bc75543c681bf061ce7e7f6 091fe78c1cb8af103" 7.4.4.2. Valid MultiMessage Signature Using the following header "11223344556677889900aabbccddeeff" And the messages defined in Section 7.2 (*Note* the ordering of the messages MUST be preserved), along with the SK value as defined in Section 7.3.1 as inputs into the Sign operations, yields the following output signature "895cd9c0ccb9aca4de913218655346d718711472f2bf1f3e68916de106a0d93cf2f4720 0819b45920bbda541db2d91480665df253fedab2843055bdc02535d83baddbbb2803ec38 08e074f71f199751e" 7.4.5. Proof Fixtures Similarly to the proof fixtures for the BLS12381SHA256 ciphersuite, the generation of the following fixtures uses the mocked_calculate_random_scalars defined in Mocked Random Scalars (#mockedrandomscalars), in place of the calculate_random_scalars operation, with the following seed value (hex encoding of the ASCII encoded 30 first digits of pi). SEED = "332e313431353932363533353839373933323338343632363433333833323739" Given the above seed the first 10 scalars returned by the mocked_calculate_random_scalars operation will be, "04f8e2518993c4383957ad14eb13a023c4ad0c67d01ec86eeb902e732ed6df3f" "5d87c1ba64c320ad601d227a1b74188a41a100325cecf00223729863966392b1" "0444607600ac70482e9c983b4b063214080b9e808300aa4cc02a91b3a92858fe" "548cd11eae4318e88cda10b4cd31ae29d41c3a0b057196ee9cf3a69d471e4e94" "2264b06a08638b69b4627756a62f08e0dc4d8240c1b974c9c7db779a769892f4" "4d99352986a9f8978b93485d21525244b21b396cf61f1d71f7c48e3fbc970a42" "5ed8be91662386243a6771fbdd2c627de31a44220e8d6f745bad5d99821a4880" "62ff1734b939ddd87beeb37a7bbcafa0a274cbc1b07384198f0e88398272208d" "05c2a0af016df58e844db8944082dcaf434de1b1e2e7136ec8a99b939b716223" "485e2adab17b76f5334c95bf36c03ccf91cef77dcfcdc6b8a69e2090b3156663" Looker, et al. Expires 11 January 2024 [Page 55] InternetDraft The BBS Signature Scheme July 2023 7.4.5.1. Valid Single Message Proof Using the header, message and signature used in Valid Single Message Signature (#validsinglemessagesignature1) to create a proof disclosing the message, with the following presentation header "bed231d880675ed101ead304512e043ade9958dd0241ea70b4b3957fba941501" will result to the following proof value "8e9bc91d68151e4b105ec0d46ca95fe1526672bed27b26541a648ec990b3b11b8905e67 1fb981f1b9cd1ed64167a7ba18b7697d9bd6f3cac02f75551f2db95bf2707e3790c10d81 5346a96198327cc7048f220bdc7d6fc5ec41c6d9f89d607ff6ef2eef19447b3e34a14660 eedb8b4f6189f202a4fef22e60dd23041e2761a9f18701019b520ed3ccf07a298e349222 ab059e7ebd84c65e3a2127ec42f5f357c27d5601b2193b697a576fd9bd896c25a75004f6 604a98707741916769c49175f" 7.4.5.2. Valid MultiMessage, All Messages Disclosed Proof Using the header, messages and signature used in Valid Multi Message Signature (#validmultimessagesignature1) to create a proof disclosing all the messages, with the following presentation header "bed231d880675ed101ead304512e043ade9958dd0241ea70b4b3957fba941501" will result to the following proof value "89910f223320044fe6342b8dabfeac786f35cc98bb64c95ecb39348281d5a8c84e97558 1b5f37ec45c8bc4cda486d5e2a20e007d0dd0fba77f846dfe3458fc01ff94a49c0585506 84638e1b88b61e8d69a1453652477af005d42cdb2d57e86b03a2cf88bc0bac5a3d12a1c0 717b9ea8d42ecdb746f522edfc15910574b289faa0438d6516504a7a66ce180b2271101d 87519cad823f03f266f66649b388e680a58a6e7ae4982ae797890d5d0b574fa73a7ae702 3d4dd9f8a9b3a11f208256d7c" 7.4.5.3. Valid MultiMessage, Half of Messages Disclosed Proof Using the same header, messages and signature as in MultiMessage, All Messages Disclosed Proof (#validmultimessageallmessages disclosedproof1) but this time with only every other messages disclosed (messages in index 0, 2, 4 and 6, in that order), with the following presentation header "bed231d880675ed101ead304512e043ade9958dd0241ea70b4b3957fba941501" will result to the following proof value Looker, et al. Expires 11 January 2024 [Page 56] InternetDraft The BBS Signature Scheme July 2023 "812a204f66c9084feed7383894d910f2c17399b3c4b4bed05660921de8539f5042318c3 56609496a6ca0a26626661be78ca723b7182ccd314924b93a3997654fcd77e29e3847dc8 81f422a751017705173ec094d2997221e134710d4fff1bd33111a4b4fc79a2201d18b5cc 63fab1252def0d4f020129c7e022f56f505aa977a7240da430bc60a2d4d17897b4222805 4a2fb4f780fb710268ebea24c9fb0e15e2ac415b99a232b13bfd215af3fb35f5518953ea ccc200555eaa69ae434eb623f0a83bb57a8a8e70ba37761ffaeb756d9115c1177ce929f0 4be23b5636120c7ac0a73546f177a3c3be2d233b3253f31c3468260723c1afa2d0febd38 161e16ed0147369bda8b05ec3f6183239c6ecb9fb54b0989160e8cdf8b9f0cf4a46a2150 232d96c466fad2d60ff067492c52cc6af1d16e62364ed6d3dc19feaf1fcf9c12750301c2 de6541c0edce5ede7425f75e01fd94a7e6137ebf23460bf3f1afec9f21767c467fdd882e b038492a390ee5d0c0f72f50f2ac5cedb705fc465f7bc093b" 8. IANA Considerations This document does not make any requests of IANA. 9. Acknowledgements The authors would like to acknowledge the significant amount of academic work that preceeded the development of this document. In particular the original work of [BBS04] which was subsequently developed in [ASM06] and in [CDL16]. This last academic work is the one mostly used by this document. The current state of this document is the product of the work of the Decentralized Identity Foundation Applied Cryptography Working group, which includes numerous active participants. In particular, the following individuals contributed ideas, feedback and wording that influenced this specification: Orie Steele, Christian Paquin, Alessandro Guggino, Tomislav Markovski and Greg Bernstein. 10. Normative References [DRBG] NIST, "Recommendation for Random Number Generation Using Deterministic Random Bit Generators", <https://nvlpubs.nist.gov/nistpubs/SpecialPublications/ NIST.SP.80090Ar1.pdf>. [ID.irtfcfrghashtocurve] FazHernandez, A., Scott, S., Sullivan, N., Wahby, R. S., and C. A. Wood, "Hashing to Elliptic Curves", Work in Progress, InternetDraft, draftirtfcfrghashtocurve 16, 15 June 2022, <https://datatracker.ietf.org/doc/html/ draftirtfcfrghashtocurve16>. Looker, et al. Expires 11 January 2024 [Page 57] InternetDraft The BBS Signature Scheme July 2023 [ID.irtfcfrgpairingfriendlycurves] Sakemi, Y., Kobayashi, T., Saito, T., and R. S. Wahby, "PairingFriendly Curves", Work in Progress, Internet Draft, draftirtfcfrgpairingfriendlycurves11, 6 November 2022, <https://datatracker.ietf.org/doc/html/ draftirtfcfrgpairingfriendlycurves11>. [RFC2119] Bradner, S., "Key words for use in RFCs to Indicate Requirement Levels", BCP 14, RFC 2119, DOI 10.17487/RFC2119, March 1997, <https://www.rfceditor.org/info/rfc2119>. [RFC4086] Eastlake 3rd, D., Schiller, J., and S. Crocker, "Randomness Requirements for Security", BCP 106, RFC 4086, DOI 10.17487/RFC4086, June 2005, <https://www.rfceditor.org/info/rfc4086>. [RFC8017] Moriarty, K., Ed., Kaliski, B., Jonsson, J., and A. Rusch, "PKCS #1: RSA Cryptography Specifications Version 2.2", RFC 8017, DOI 10.17487/RFC8017, November 2016, <https://www.rfceditor.org/info/rfc8017>. [RFC8937] Cremers, C., Garratt, L., Smyshlyaev, S., Sullivan, N., and C. Wood, "Randomness Improvements for Security Protocols", RFC 8937, DOI 10.17487/RFC8937, October 2020, <https://www.rfceditor.org/info/rfc8937>. [SHA2] NIST, "Secure Hash Standard (SHS)", <https://nvlpubs.nist.gov/nistpubs/FIPS/ NIST.FIPS.1804.pdf>. [SHA3] NIST, "SHA3 Standard: PermutationBased Hash and ExtendableOutput Functions", <https://nvlpubs.nist.gov/nistpubs/FIPS/ NIST.FIPS.202.pdf>. 11. Informative References [ADR02] An, J. H., Dodis, Y., and T. Rabin, "On the Security of Joint Signature and Encryption", In EUROCRYPT, pages 83107, April 2002, <https://doi.org/10.1007/3540460357_6>. [ASM06] Au, M. H., Susilo, W., and Y. Mu, "ConstantSize Dynamic kTAA", In International Conference on Security and Cryptography for Networks, pages 111125, Springer, Berlin, Heidelberg, 2006, <https://link.springer.com/chapter/10.1007/11832072_8>. Looker, et al. Expires 11 January 2024 [Page 58] InternetDraft The BBS Signature Scheme July 2023 [BBS04] Boneh, D., Boyen, X., and H. Shacham, "Short Group Signatures", In Advances in Cryptology, pages 4155, 2004, <https://link.springer.com/ chapter/10.1007/9783540286288_3>. [Bowe19] Bowe, S., "Faster subgroup checks for BLS12381", July 2019, <https://eprint.iacr.org/2019/814>. [CDL16] Camenisch, J., Drijvers, M., and A. Lehmann, "Anonymous Attestation Using the Strong Diffie Hellman Assumption Revisited", In International Conference on Trust and Trustworthy Computing, pages 120, Springer, Cham, 2016, <https://eprint.iacr.org/2016/663.pdf>. [HDWH12] Heninger, N., Durumeric, Z., Wustrow, E., and J.A. Halderman, "Mining your Ps and Qs: Detection of widespread weak keys in network devices", In USENIX Security, pages 205220, August 2012, <https://www.usenix.org/system/files/conference/ usenixsecurity12/sec12final228.pdf>. [ID.irtfcfrgblssignature] Boneh, D., Gorbunov, S., Wahby, R. S., Wee, H., Wood, C. A., and Z. Zhang, "BLS Signatures", Work in Progress, InternetDraft, draftirtfcfrgblssignature05, 16 June 2022, <https://datatracker.ietf.org/doc/html/draftirtf cfrgblssignature05>. [ZCASHREVIEW] NCC Group, "Zcash Overwinter Consensus and Sapling Cryptography Review", <https://research.nccgroup.com/wp content/uploads/2020/07/ NCC_Group_Zcash2018_Public_Report_20190130_v1.3.pdf>. Appendix A. BLS12381 hash_to_curve Definition Using SHAKE256 The following defines a hash_to_curve suite [ID.irtfcfrghashtocurve] for the BLS12381 curve for both the G1 and G2 subgroups using the extendable output function (xof) of SHAKE256 as per the guidance defined in section 8.9 of [ID.irtfcfrghashtocurve]. Note the notation used in the below definitions is sourced from [ID.irtfcfrghashtocurve]. Looker, et al. Expires 11 January 2024 [Page 59] InternetDraft The BBS Signature Scheme July 2023 A.1. BLS12381 G1 The suite of BLS12381G1_XOF:SHAKE256_SSWU_RO_ is defined as follows: * encoding type: hash_to_curve (Section 3 of [@!ID.irtfcfrghashtocurve]) * E: y^2 = x^3 + 4 * p: 0x1a0111ea397fe69a4b1ba7b6434bacd764774b84f38512bf6730d2a0f6b0f624 1eabfffeb153ffffb9feffffffffaaab * r: 0x73eda753299d7d483339d80809a1d80553bda402fffe5bfeffffffff00000001 * m: 1 * k: 128 * expand_message: expand_message_xof (Section 5.3.2 of [@!ID.irtfcfrghashtocurve]) * hash: SHAKE256 * L: 64 * f: Simplified SWU for AB == 0 (Section 6.6.3 of [@!ID.irtfcfrghashtocurve]) * Z: 11 * E': y'^2 = x'^3 + A' * x' + B', where  A' = 0x144698a3b8e9433d693a02c96d4982b0ea985383ee66a8d8e8981aef d881ac98936f8da0e0f97f5cf428082d584c1d  B' = 0x12e2908d11688030018b12e8753eee3b2016c1f0f24f4070a0b9c14f cef35ef55a23215a316ceaa5d1cc48e98e172be0 * iso_map: the 11isogeny map from E' to E given in Appendix E.2 of [@!ID.irtfcfrghashtocurve] * h_eff: 0xd201000000010001 Note that the h_eff values for this suite are copied from that defined for the BLS12381G1_XMD:SHA256_SSWU_RO_ suite defined in section 8.8.1 of [ID.irtfcfrghashtocurve]. Looker, et al. Expires 11 January 2024 [Page 60] InternetDraft The BBS Signature Scheme July 2023 An optimized example implementation of the Simplified SWU mapping to the curve E' isogenous to BLS12381 G1 is given in Appendix F.2 [ID.irtfcfrghashtocurve]. Appendix B. Use Cases B.1. Noncorrelating Security Token In the most general sense BBS signatures can be used in any application where a cryptographically secured token is required but correlation caused by usage of the token is undesirable. For example in protocols like OAuth2.0 the most commonly used form of the access token leverages the JWT format alongside conventional cryptographic primitives such as traditional digital signatures or HMACs. These access tokens are then used by a relying party to prove authority to a resource server during a request. However, because the access token is most commonly sent by value as it was issued by the authorization server (e.g in a bearer style scheme), the access token can act as a source of strong correlation for the relying party. Relevant prior art can be found here (https://www.ietf.org/archive/id/draftprivateaccesstokens 01.html). BBS Signatures due to their unique properties removes this source of correlation but maintains the same set of guarantees required by a resource server to validate an access token back to its relevant authority (note that an approach to signing JSON tokens with BBS that may be of relevance is the JWP (https://jsonwebproofs.github.io/ jsonwebproofs/draftjmillerjsonwebproof.html) format and serialization). In the context of a protocol like OAuth2.0 the access token issued by the authorization server would feature a BBS Signature, however instead of the relying party providing this access token as issued, in their request to a resource server, they generate a unique proof from the original access token and include that in the request instead, thus removing this vector of correlation. B.2. Improved Bearer Security Token Bearer based security tokens such as JWT based access tokens used in the OAuth2.0 protocol are a highly popular format for expressing authorization grants. However their usage has several security limitations. Notably a bearer based authorization scheme often has to rely on a secure transport between the authorized party (client) and the resource server to mitigate the potential for a MITM attack or a malicious interception of the access token. The scheme also has to assume a degree of trust in the resource server it is presenting an access token to, particularly when the access token grants more Looker, et al. Expires 11 January 2024 [Page 61] InternetDraft The BBS Signature Scheme July 2023 than just access to the target resource server, because in a bearer based authorization scheme, anyone who possesses the access token has authority to what it grants. Bearer based access tokens also suffer from the threat of replay attacks. Improved schemes around authorization protocols often involve adding a layer of proof of cryptographic key possession to the presentation of an access token, which mitigates the deficiencies highlighted above as well as providing a way to detect a replay attack. However, approaches that involve proof of cryptographic key possession such as DPoP (https://datatracker.ietf.org/doc/html/draftietfoauthdpop04 (https://datatracker.ietf.org/doc/html/draftietfoauthdpop04)) suffer from an increase in protocol complexity. A party requesting authorization must pregenerate appropriate key material, share the public portion of this with the authorization server alongside proving possession of the private portion of the key material. The authorization server must also beable to accommodate receiving this information and validating it. BBS Signatures ofter an alternative model that solves the same problems that proof of cryptographic key possession schemes do for bearer based schemes, but in a way that doesn't introduce new up front protocol complexity. In the context of a protocol like OAuth2.0 the access token issued by the authorization server would feature a BBS Signature, however instead of the client providing this access token as issued, in their request to a resource server, they generate a unique proof from the original access token and include that in the request instead. Because the access token is not shared in a request to a resource server, attacks such as MITM are mitigated. A resource server also obtains the ability to detect a replay attack by ensuring the proof presented is unique. B.3. Selectively Disclosure Enabled Identity Credentials BBS signatures when applied to the problem space of identity credentials can help to enhance user privacy. For example a digital drivers license that is cryptographically signed with a BBS signature, allows the holder or subject of the license to disclose different claims from their drivers license to different parties. Furthermore, the unlinkable presentations property of proofs generated by the scheme remove an important possible source of correlation for the holder across multiple presentations. Appendix C. Additional Test Vectors *NOTE* These fixtures are a work in progress and subject to change Looker, et al. Expires 11 January 2024 [Page 62] InternetDraft The BBS Signature Scheme July 2023 C.1. BLS12381SHAKE256 Ciphersuite C.1.1. Signature Test Vectors C.1.1.1. No Header Valid Signature Using the messages defined in Section 7.2, with no header, along with the SK and PK values defined in Section 7.3.1 results in the following signature value "abfa513cdb323e47214b7c182fb623197a0681b753f897545a73d82ee133a8ecf69db9a a09fe425df4e7687d99d779db5c66199c0dc9d2a442d331c43f56e060edc69a69ed2f13d e3813b98ce6b05737" C.1.1.2. Modified Message Signature Using the following header "11223344556677889900aabbccddeeff" And the following message (the first message defined in Section 7.2) "" With the following signature "98eb37fceb31115bf647f2983aef578ad895e55f7451b1add02fa738224cb89a31b148e ace4d20d001be31d162c58d12574f30e68665b6403956a83b23a16f1daceacce8c5fde25 d3defd52d6d5ff2e1" Along with the PK value as defined in Section 7.3.1 as inputs into the Verify operation should fail signature validation due to the message value being different from what was signed C.1.1.3. Extra Unsigned Message Signature Using the following header "11223344556677889900aabbccddeeff" And the following messages (the two first messages defined in Section 7.2) "9872ad089e452c7b6e283dfac2a80d58e8d0ff71cc4d5e310a1debdda4a45f02" "c344136d9ab02da4dd5908bbba913ae6f58c2cc844b802a6f811f5fb075f9b80" Looker, et al. Expires 11 January 2024 [Page 63] InternetDraft The BBS Signature Scheme July 2023 With the following signature (which is a signature to only the first of the above two messages) "98eb37fceb31115bf647f2983aef578ad895e55f7451b1add02fa738224cb89a31b148e ace4d20d001be31d162c58d12574f30e68665b6403956a83b23a16f1daceacce8c5fde25 d3defd52d6d5ff2e1" Along with the PK value as defined in Section 7.3.1 as inputs into the Verify operation should fail signature validation due to an additional message being supplied that was not signed. C.1.1.4. Missing Message Signature Using the following header "11223344556677889900aabbccddeeff" And the following messages (the two first messages defined in Section 7.2) "9872ad089e452c7b6e283dfac2a80d58e8d0ff71cc4d5e310a1debdda4a45f02" "c344136d9ab02da4dd5908bbba913ae6f58c2cc844b802a6f811f5fb075f9b80" With the following signature (which is a signature on all the messages defined in Section 7.2) "97a296c83ed3626fe254d26021c5e9a087b580f1e8bc91bb51efb04420bfdaca215fe37 6a0bc12440bcc52224fb33c696cca9239b9f28dcddb7bd850aae9cd1a9c3e9f3639953fe 789dbba53b8f0dd6f" Along with the PK value as defined in Section 7.3.1 as inputs into the Verify operation should fail signature validation due to missing messages that were originally present during the signing. C.1.1.5. Reordered Message Signature Using the following header "11223344556677889900aabbccddeeff" And the following messages (reordering of the messages defined in Section 7.2) Looker, et al. Expires 11 January 2024 [Page 64] InternetDraft The BBS Signature Scheme July 2023 "" "96012096" "ac55fb33a75909ed" "d183ddc6e2665aa4e2f088af" "515ae153e22aae04ad16f759e07237b4" "496694774c5604ab1b2544eababcf0f53278ff50" "77fe97eb97a1ebe2e81e4e3597a3ee740a66e9ef2412472c" "7372e9daa5ed31e6cd5c825eac1b855e84476a1d94932aa348e07b73" "c344136d9ab02da4dd5908bbba913ae6f58c2cc844b802a6f811f5fb075f9b80" "9872ad089e452c7b6e283dfac2a80d58e8d0ff71cc4d5e310a1debdda4a45f02" With the following signature "97a296c83ed3626fe254d26021c5e9a087b580f1e8bc91bb51efb04420bfdaca215fe37 6a0bc12440bcc52224fb33c696cca9239b9f28dcddb7bd850aae9cd1a9c3e9f3639953fe 789dbba53b8f0dd6f" Along with the PK value as defined in Section 7.3.1 as inputs into the Verify operation should fail signature validation due to messages being reordered from the order in which they were signed C.1.1.6. Wrong Public Key Signature Using the following header "11223344556677889900aabbccddeeff" And the messages as defined in Section 7.2, mapped to the scalars in Section 7.3.2 and with the following signature "97a296c83ed3626fe254d26021c5e9a087b580f1e8bc91bb51efb04420bfdaca215fe37 6a0bc12440bcc52224fb33c696cca9239b9f28dcddb7bd850aae9cd1a9c3e9f3639953fe 789dbba53b8f0dd6f" Along with the PK value as defined in Section 7.3.1 as inputs into the Verify operation should fail signature validation due to public key used to verify is incorrect Looker, et al. Expires 11 January 2024 [Page 65] InternetDraft The BBS Signature Scheme July 2023 C.1.1.7. Wrong Header Signature Using the following header "ffeeddccbbaa00998877665544332211" And the messages as defined in Section 7.2 and with the following signature "97a296c83ed3626fe254d26021c5e9a087b580f1e8bc91bb51efb04420bfdaca215fe37 6a0bc12440bcc52224fb33c696cca9239b9f28dcddb7bd850aae9cd1a9c3e9f3639953fe 789dbba53b8f0dd6f" Along with the PK value as defined in Section 7.3.1 as inputs into the Verify operation should fail signature validation due to header value being modified from what was originally signed C.1.2. Proof Test Vectors C.1.2.1. No Header Valid Proof Using messages, PK and signature as in No Header Valid Signature (#noheadervalidsignature), with only every other messages disclosed (messages in index 0, 2, 4 and 6, in that order), with no header and the following presentation header "bed231d880675ed101ead304512e043ade9958dd0241ea70b4b3957fba941501" while using the mocked rng defined in Section 7.1, will result to the following proof value "ae46046037ed58bfa5771c603895b26b42748a3071a1dc9f8a272a4bc030bc3cda7cfa8 686a6dc8382d728ad96e8d8ceb6ad6b76b99242514e520c43dd7d1a0728ce709d977c4dd 200874e4acffa5b4cc0cbbd37c00d979d8688c636770cc8b428ea9f05ed60cd85fdbd4c2 fd73092e8bfc167c244d6e285ace1deade4fe8ce74fe2993a041e84004fe7d3dd170db76 5f7811a91043c4e75e9231804d577bfa533ec7a44bb6e49eb85089d8df1dc1acfb00ea0c 7bdce5609595099e3cf7559c1715df6ec6982c5d9fffd317955ec3387a9055de28691e39 9b5af14722ae044a506d622e0e6ff0de8d1e4d4f3e9e5fdb01c4dbab02826ac38cb40eb8 0afe7b9d661dc27c94b146fedea19353b70310714932674c1f4bc1edc2c17605749e0bbb 60a77ac62a606d31081ff5a52e1485be257b2c0afa4b676438b0eaa0bd483c66828bc660 32b91fbe8a309408e595e085a1b55e2dd12789e6f522ef5682ac46deb628e03e4eb0303a f7162f36a119313c3396fe6bca6082238fe396e8c08e607c4" Looker, et al. Expires 11 January 2024 [Page 66] InternetDraft The BBS Signature Scheme July 2023 C.1.2.2. No Presentation Header Valid Proof Using the same header, PK, messages and signature as in Multi Message, All Messages Disclosed Proof (#validmultimessageall messagesdisclosedproof), with every other message disclosed (messages in index 0, 2, 4 and 6, in that order), with no presentation header, while using the mocked rng defined in Section 7.1, will result to the following proof value "ac0424b2a984c55d0061aa61df105f2c882d393494f3f4205d1e73f93c9c76b30664bae b3dc87f23fbf4035fb0a8e76b851dd39cecce8843e747ccf540f0850a30e1317f8897a56 c2d85bfc1e0b4dba1b0e0322d89aad4feb8b21c414a384a015238f4643b9d075bc6638ec 42d0e285f73c6ca9830be2a5bb48955ddb094751026493147def3cfe2a37bbd89a4536bd ff6548d891d5206ac6b69c22c6fa8624512caeb80c56dbd79b7a4c8050bc9e782232f959 4087561b10d7f4b0bef708458096637a34962399e918d5adb496faf7c38ded94fe79c3bf dc53c81f0dcb0da3f1bed0dbfdb6f0310d71d50a63b265e1992dd7d12315bf11da69a889 7d8e33be36f116d58eff998f80e23ad0aad544e93615a5f10f169a3aed7c4d6266191a21 412f4f4d8eb5096a05243b809c4c53a8d237817dfa15a403d8943b968d1216c753fb988f bcfe9280232c25cac1570873a66d3f4a7e713fb19723f5b99338f053f08fae9f905b10e0 526451968e25569e3779f642a4d2b6bcc1e00be28e2711d1a" C.1.3. Hash to Scalar Test Vectors Using the following input message, "9872ad089e452c7b6e283dfac2a80d58e8d0ff71cc4d5e310a1debdda4a45f02" And the default dst defined in hash_to_scalar (#hashtoscalar), i.e., "4242535f424c53313233383147315f584f463a5348414b452d3235365f535357555f524 f5f4832475f484d32535f4832535f" We get the following scalar, encoded with I2OSP and represented in big endian order, "0500031f786fde5326aa9370dd7ffe9535ec7a52cf2b8f432cad5d9acfb73cd3" C.2. BLS12381SHA256 Ciphersuite C.2.1. Signature Test Vectors C.2.1.1. No Header Valid Signature Using the messages defined in Section 7.2, with no header, along with the SK and PK values defined in Section 7.4.1 results in the following signature value Looker, et al. Expires 11 January 2024 [Page 67] InternetDraft The BBS Signature Scheme July 2023 "ae0b1807865598b3884e3e9b110e8faec662050dc9b4d95309d957fd30f6fc24161f6f8 b5680f1f5d1b547be221547915ca665c7b3087a336d5e0c5fcfea62576afd13e563b730e f6d6d81f9944ab95b" C.2.1.2. Modified Message Signature Using the following header "11223344556677889900aabbccddeeff" And the following message (the first message defined in Section 7.2) "" With the following signature "88c0eb3bc1d97610c3a66d8a3a73f260f95a3028bccf7fff7d9851e2acd9f3f32fdf58a 5b34d12df8177adf37aa318a20f72be7d37a8e8d8441d1bc0bc75543c681bf061ce7e7f6 091fe78c1cb8af103" Along with the PK value as defined in Section 7.4.1 as inputs into the Verify operation should fail signature validation due to the message value being different from what was signed. C.2.1.3. Extra Unsigned Message Signature Using the following header "11223344556677889900aabbccddeeff" And the following messages (the two first messages defined in Section 7.2) "9872ad089e452c7b6e283dfac2a80d58e8d0ff71cc4d5e310a1debdda4a45f02" "c344136d9ab02da4dd5908bbba913ae6f58c2cc844b802a6f811f5fb075f9b80" With the following signature (which is a signature to only the first of the above two messages) "88c0eb3bc1d97610c3a66d8a3a73f260f95a3028bccf7fff7d9851e2acd9f3f32fdf58a 5b34d12df8177adf37aa318a20f72be7d37a8e8d8441d1bc0bc75543c681bf061ce7e7f6 091fe78c1cb8af103" Along with the PK value as defined in Section 7.4.1 as inputs into the Verify operation should fail signature validation due to an additional message being supplied that was not signed. Looker, et al. Expires 11 January 2024 [Page 68] InternetDraft The BBS Signature Scheme July 2023 C.2.1.4. Missing Message Signature Using the following header "11223344556677889900aabbccddeeff" And the following messages (the two first messages defined in Section 7.2) "9872ad089e452c7b6e283dfac2a80d58e8d0ff71cc4d5e310a1debdda4a45f02" "c344136d9ab02da4dd5908bbba913ae6f58c2cc844b802a6f811f5fb075f9b80" With the following signature (which is a signature on all the messages defined in Section 7.2) "895cd9c0ccb9aca4de913218655346d718711472f2bf1f3e68916de106a0d93cf2f4720 0819b45920bbda541db2d91480665df253fedab2843055bdc02535d83baddbbb2803ec38 08e074f71f199751e" Along with the PK value as defined in Section 7.4.1 as inputs into the Verify operation should fail signature validation due to missing messages that were originally present during the signing. C.2.1.5. Reordered Message Signature Using the following header "11223344556677889900aabbccddeeff" And the following messages (reordering of the messages defined in Section 7.2) Looker, et al. Expires 11 January 2024 [Page 69] InternetDraft The BBS Signature Scheme July 2023 "" "96012096" "ac55fb33a75909ed" "d183ddc6e2665aa4e2f088af" "515ae153e22aae04ad16f759e07237b4" "496694774c5604ab1b2544eababcf0f53278ff50" "77fe97eb97a1ebe2e81e4e3597a3ee740a66e9ef2412472c" "7372e9daa5ed31e6cd5c825eac1b855e84476a1d94932aa348e07b73" "c344136d9ab02da4dd5908bbba913ae6f58c2cc844b802a6f811f5fb075f9b80" "9872ad089e452c7b6e283dfac2a80d58e8d0ff71cc4d5e310a1debdda4a45f02" With the following signature "895cd9c0ccb9aca4de913218655346d718711472f2bf1f3e68916de106a0d93cf2f4720 0819b45920bbda541db2d91480665df253fedab2843055bdc02535d83baddbbb2803ec38 08e074f71f199751e" Along with the PK value as defined in Section 7.4.1 as inputs into the Verify operation should fail signature validation due to messages being reordered from the order in which they were signed. C.2.1.6. Wrong Public Key Signature Using the following header "11223344556677889900aabbccddeeff" And the messages as defined in Section 7.2 and with the following signature "895cd9c0ccb9aca4de913218655346d718711472f2bf1f3e68916de106a0d93cf2f4720 0819b45920bbda541db2d91480665df253fedab2843055bdc02535d83baddbbb2803ec38 08e074f71f199751e" Along with the PK value as defined in Section 7.4.1 as inputs into the Verify operation should fail signature validation due to public key used to verify is incorrect. Looker, et al. Expires 11 January 2024 [Page 70] InternetDraft The BBS Signature Scheme July 2023 C.2.1.7. Wrong Header Signature Using the following header "ffeeddccbbaa00998877665544332211" And the messages as defined in Section 7.2 and with the following signature "895cd9c0ccb9aca4de913218655346d718711472f2bf1f3e68916de106a0d93cf2f4720 0819b45920bbda541db2d91480665df253fedab2843055bdc02535d83baddbbb2803ec38 08e074f71f199751e" Along with the PK value as defined in Section 7.4.1 as inputs into the Verify operation should fail signature validation due to header value being modified from what was originally signed. C.2.2. Proof Test Vectors C.2.2.1. No Header Valid Proof Using messages, PK and signature as in No Header Valid Signature (#noheadervalidsignature1), with only every other messages disclosed (messages in index 0, 2, 4 and 6, in that order), with no header and the following presentation header "bed231d880675ed101ead304512e043ade9958dd0241ea70b4b3957fba941501" while using the mocked rng defined in Section 7.1, will result to the following proof value "89cefce40c3dc7adcc8bcd07d92767d0f0397d0e120511b58b8403b531fa573987003fd 235bdfe6fb5e9da937774c7799397bc951cd4030a78f8dae7820bfa150a243d74c3aa34d af6299dc0baaf7796705e952e2c8ac7d37c69e91db85012d61f3387f096a022361972d6a fd2c095eeb4adc95f72cfb739539f27f1917c7cc80fba233fd9eef52196cc31183d7c416 8e6b87a66b249225398c31e2950e3e24420d3af3eeee3308933a343310cf822287dc95b8 6eb5716e8ff23cc52c980d41218bdaeff521a242e5330daee27a1a499ac1a20b0c39477c ebf4936d0ec2b95e0384b80bba24febc527b0b640481df2125b58f85708590838ee32789 ce1c755a6150ce6bf0650bff3dfff61eae16e88916f9869d75c7884554ea517f8dec320c 011d211b1ec05073238d7949fe6d9ff6f729c475bbfc5a21c6fa6d35df92f79d43c3f78b cd3cb4c6e6de2ac27108316bd8d751fb445c5f6b4e6e104b227362efe3f5f2904b6100e0 1b6cf94d9d6c5501fbbfd2e5e57c2dcb1cf117c41eedcda57" Looker, et al. Expires 11 January 2024 [Page 71] InternetDraft The BBS Signature Scheme July 2023 C.2.2.2. No Presentation Header Valid Proof Using the same header, PK, messages and signature as in Multi Message, All Messages Disclosed Proof (#validmultimessageall messagesdisclosedproof1), with every other message disclosed (messages in index 0, 2, 4 and 6, in that order), with no presentation header, while using the mocked rng defined in Section 7.1, will result to the following proof value "812a204f66c9084feed7383894d910f2c17399b3c4b4bed05660921de8539f5042318c3 56609496a6ca0a26626661be78ca723b7182ccd314924b93a3997654fcd77e29e3847dc8 81f422a751017705173ec094d2997221e134710d4fff1bd332fd2f270e96b6b8de89b2ff f1294dcd5bd0e1eb314b199f7fb7f5702839f409e167c6a78eb3a57a08a7996330f83ac1 67d51c57f4ebabea87ad8e08b4b3875926d9d2427df59abd2e2befe32774b03668a5080c 54412f81c4cbf47571b15a35c4f93bd38805c3224ca6c4d2f387c28288e8fffb0ab0c43c db860f31c739b3091192268789d3da05b97d277ab91699a209c97e9057a6cf66c9d4d311 ea09c680d4aa2485bfdbaa7ee954a2e0b4f6ea542eda44a1adf2b19f63332b9de00f46c5 33f1c696bc8b4aea5cc56b0cf12ecdba434b36324d754eabf1734e6c3301f300435797ed cb007eae6ef75bc5d5500a1ce74ba8f4e0c5c8836f42371c2c469265909585f44695f088 ea39bda2317224f47208c7f77570deae84efea007c14f18ef" C.2.3. Hash to Scalar Test Vectors Using the following input message, "9872ad089e452c7b6e283dfac2a80d58e8d0ff71cc4d5e310a1debdda4a45f02" And the default dst defined in hash_to_scalar (#hashtoscalar), i.e., "4242535f424c53313233383147315f584d443a5348412d3235365f535357555f524f5f4 832475f484d32535f4832535f" We get the following scalar, encoded with I2OSP and represented in big endian order, "0f90cbee27beb214e6545becb8404640d3612da5d6758dffeccd77ed7169807c" Appendix D. Proof Generation and Verification Algorithmic Explanation The following section provides a high level explanation of how the ProofGen and ProofVerify operations work. ProofGen can be categorized as a generic noninteractive zeroknowledge proofof knowledge (nizk). A nizk works as follows; Assume the group points J_0, J_1, ..., J_n and the exponents e_0, e_1, ..., e_n. Assume also that all the group point are publicly known, while only the exponent e_0 is known to the verifier and the exponents e_1, ..., e_n are known only by the prover. The nizk can be used to prove a Looker, et al. Expires 11 January 2024 [Page 72] InternetDraft The BBS Signature Scheme July 2023 relationship of the form, J_O * e_0 = J_1 * e_1 + J_2 * e_2 + ... + J_n * e_n While revealing nothing about the secret exponents (i.e., e_1, ..., e_n). For BBS, let the prover be in possession of a BBS signature (A, e) on messages msg_1, ..., msg_L and a domain value (see Sign (#signature generationsign)). Let A = B * (1/(e + SK)) where SK the signer's secret key and, [1] B = P1 + Q_1 * domain + H_1 * msg_1 + ... + H_L * msg_L Let (i1, ..., iR) be the indexes of the messages the prover wants to disclose and (j1, ..., jU) be the indexes corresponding to undisclosed messages (i.e., (j1, ..., jU) = range(1, L) \ (i1, ..., iR)). To prove knowledge of a signature on the disclosed messages, work as follows; * Prove possession of a valid signature. As defined above, a signature (A, e), on messages msg_1, ..., msg_L is valid, if A = B * 1/(e + SK), where B as in [1]. However we cannot reveal neither A, e nor B to the verifier (signature is uniquely identifiable and B will reveal information about the signed messages, even the undisclosed ones). To get around this, we need to hide the signature (A, e) and the value of B, in a way that will allow proving knowledge of such ellements with the aformentioned relationship (i.e., that A = B * 1/(e + SK)), without revealing their value. We do this by randomizing them. To do that, take uniformly random r1 in [1, r1], and calculate, [2] Abar = A * r1, [3] Bbar = B * r1 + Abar * (e) The values (Abar, Bbar) will be part of the proof and are used to prove possession of a BBS signature, without revealing the signature itself. Note that; if Abar and Bbar are constructed using a valid BBS signatures as above, then Abar * SK = Bbar => e(Abar, PK) = e(Bbar, BP2) where SK, PK the signer's secret and public key and BP2 the base element in G2 (used to create the signerâ€™ (U+2019)s PK, see Section 3.3.2). This last equation is something that the verifier can check. This also serves to bind the proof to the signer's PK. * Prove that the disclosed messages are signed by that signature. Set the following, Looker, et al. Expires 11 January 2024 [Page 73] InternetDraft The BBS Signature Scheme July 2023 [4] D = P1 + Q_1 * domain + H_i1 * msg_i1 + ... + H_iR * msg_iR [5] r1' = r1 ^ 1 mod r If the Abar and Bbar values are constructed using a valid BBS signature as in [2] and [3], then the following equation will hold, [6] D = Bbar * r1' + Abar * (e * r1')  H_ji * msg_j1  ... ...  H_jU * msg_jU Note that the verifier will know the elements in the left side of [6] (i.e., D, or rather they will know all the values needed to calculate D, as it depends on the public doamin value and the disclosed messages) but not the exponents in the right side (i.e., r1', e and the undisclosed messages: msg_j1, ..., msg_jU). However, using a nizk, the prover can convince the verifier that they (the prover) know the exponents that satisfy that equation, without disclosing them. If the above equation ([6]) holds, and e(Abar, PK) = e(Bbar, BP2), one could solve [6] to get B = Bbar * r1' + Abar * e * r1' (where B as in [1]). Note that B will also contain the disclosed messages. Then, using the properties of pairings, one can see that, e(Abar * r1', PK + BP2 * e) = (B, BP2) which is exactly what Verify (#signatureverificationverify) checks for A = Abar * r1'. So seting A = Abar * r1', the values A, e, B will format a valid BBS signature. Note that the verifier doesn't know r1', e or all the values to compute B. However, they know that the prover knows them, and as we saw above, knowledge of those values means knowledge of a valid signature on (among others) the disclosed messages. To sum up; in order to validate the proof, a verifier checks that e(Abar, PK) = e(Bbar, BP2) and verifies the nizk. Validating the proof, will guarantee the authenticity and integrity of the disclosed messages, as well as knowledge of the undisclosed messages and of the signature. Appendix E. Document History 00 * Initial version 01 Looker, et al. Expires 11 January 2024 [Page 74] InternetDraft The BBS Signature Scheme July 2023 * Populated fixtures * Added SHA256 based ciphersuite * Fixed typo in ProofVerify * Clarify ASCII string usage in DST * Added MapMessageToScalar test vectors * Fix typo in ciphersuite name 02 * Variety of editiorial clarifications * Clarified integer endianness * Revised the encode for hash operation * Shifted to using CSPRNG instead of PRF * Removed total number of messages from proof verify operation * Added deterministic proof fixtures * Shifted to multiple CSPRNG calls to calculate random elements, instead of expand_message * Updated hash_to_scalar to a single output 03 * Updated core operation based on new academic paper (https://eprint.iacr.org/2023/275) * Variety of editorial updates * Updated exception and error handling * Added extension point for the operation with which the generators are created, allowing ciphersuites to define different operations for creating the generator points. * Added extension point for the operation with which the input messages are mapped to scalar values, allowing ciphersuites to define different messagetoscalar mapping operations * Added signature/proof fixtures with an empty header or an empty presentation header input * Updated the fixtures to use variable length messages (one of which is now the empty message "") Authors' Addresses Tobias Looker MATTR Email: tobias.looker@mattr.global Vasilis Kalos MATTR Email: vasilis.kalos@mattr.global Looker, et al. Expires 11 January 2024 [Page 75] InternetDraft The BBS Signature Scheme July 2023 Andrew Whitehead Portage Email: andrew.whitehead@portagecybertech.com Mike Lodder CryptID Email: redmike7@gmail.com Looker, et al. Expires 11 January 2024 [Page 76]