Skip to main content

Intent-Based Networking - Concepts and Definitions
draft-irtf-nmrg-ibn-concepts-definitions-05

The information below is for an old version of the document.
Document Type
This is an older version of an Internet-Draft that was ultimately published as RFC 9315.
Authors Alexander Clemm , Laurent Ciavaglia , Lisandro Zambenedetti Granville , Jeff Tantsura
Last updated 2021-09-20 (Latest revision 2021-09-02)
Replaces draft-clemm-nmrg-dist-intent
RFC stream Internet Research Task Force (IRTF)
Formats
IETF conflict review conflict-review-irtf-nmrg-ibn-concepts-definitions, conflict-review-irtf-nmrg-ibn-concepts-definitions, conflict-review-irtf-nmrg-ibn-concepts-definitions, conflict-review-irtf-nmrg-ibn-concepts-definitions, conflict-review-irtf-nmrg-ibn-concepts-definitions, conflict-review-irtf-nmrg-ibn-concepts-definitions
Additional resources Mailing list discussion
Stream IRTF state Waiting for Document Shepherd
Revised I-D Needed
Consensus boilerplate Yes
Document shepherd Jérôme François
Shepherd write-up Show Last changed 2021-09-03
IESG IESG state Became RFC 9315 (Informational)
Telechat date (None)
Responsible AD (None)
Send notices to jerome.francois@inria.fr
draft-irtf-nmrg-ibn-concepts-definitions-05
Network Working Group                                           A. Clemm
Internet-Draft                                                 Futurewei
Intended status: Informational                              L. Ciavaglia
Expires: March 6, 2022                                    Rakuten Mobile
                                                            L. Granville
                         Federal University of Rio Grande do Sul (UFRGS)
                                                             J. Tantsura
                                                               Microsoft
                                                       September 2, 2021

           Intent-Based Networking - Concepts and Definitions
              draft-irtf-nmrg-ibn-concepts-definitions-05

Abstract

   Intent and Intent-Based Networking (IBN) are taking the industry by
   storm.  At the same time, IBN-related terms are often used loosely
   and inconsistently, in many cases overlapping and confused with other
   concepts such as "Policy."  This document clarifies the concept of
   "Intent" and provides an overview of the functionality that is
   associated with it.  The goal is to contribute towards a common and
   shared understanding of terms, concepts, and functionality that can
   be used as the foundation to guide further definition of associated
   research and engineering problems and their solutions.

   This document is a product of the IRTF Network Management Research
   Group (NMRG).  It reflects the consensus of the RG, receiving reviews
   and explicit support from many members.  It is published for
   informational purposes.

Status of This Memo

   This Internet-Draft is submitted in full conformance with the
   provisions of BCP 78 and BCP 79.

   Internet-Drafts are working documents of the Internet Engineering
   Task Force (IETF).  Note that other groups may also distribute
   working documents as Internet-Drafts.  The list of current Internet-
   Drafts is at https://datatracker.ietf.org/drafts/current/.

   Internet-Drafts are draft documents valid for a maximum of six months
   and may be updated, replaced, or obsoleted by other documents at any
   time.  It is inappropriate to use Internet-Drafts as reference
   material or to cite them other than as "work in progress."

   This Internet-Draft will expire on March 6, 2022.

Clemm, et al.             Expires March 6, 2022                 [Page 1]
Internet-Draft                                            September 2021

Copyright Notice

   Copyright (c) 2021 IETF Trust and the persons identified as the
   document authors.  All rights reserved.

   This document is subject to BCP 78 and the IETF Trust's Legal
   Provisions Relating to IETF Documents
   (https://trustee.ietf.org/license-info) in effect on the date of
   publication of this document.  Please review these documents
   carefully, as they describe your rights and restrictions with respect
   to this document.  Code Components extracted from this document must
   include Simplified BSD License text as described in Section 4.e of
   the Trust Legal Provisions and are provided without warranty as
   described in the Simplified BSD License.

Table of Contents

   1.  Introduction  . . . . . . . . . . . . . . . . . . . . . . . .   3
   2.  Definitions and Acronyms  . . . . . . . . . . . . . . . . . .   5
   3.  Introduction of Concepts  . . . . . . . . . . . . . . . . . .   6
     3.1.  Intent and Intent-Based Management  . . . . . . . . . . .   6
     3.2.  Related Concepts  . . . . . . . . . . . . . . . . . . . .   9
       3.2.1.  Service Models  . . . . . . . . . . . . . . . . . . .   9
       3.2.2.  Policy and Policy-Based Network Management  . . . . .  11
       3.2.3.  Distinguishing between Intent, Policy, and Service
               Models  . . . . . . . . . . . . . . . . . . . . . . .  13
   4.  Principles  . . . . . . . . . . . . . . . . . . . . . . . . .  14
   5.  Intent-Based Networking - Functionality . . . . . . . . . . .  17
     5.1.  Intent Fulfillment  . . . . . . . . . . . . . . . . . . .  18
       5.1.1.  Intent Ingestion and Interaction with Users . . . . .  18
       5.1.2.  Intent Translation  . . . . . . . . . . . . . . . . .  18
       5.1.3.  Intent Orchestration  . . . . . . . . . . . . . . . .  19
     5.2.  Intent Assurance  . . . . . . . . . . . . . . . . . . . .  19
       5.2.1.  Monitoring  . . . . . . . . . . . . . . . . . . . . .  19
       5.2.2.  Intent Compliance Assessment  . . . . . . . . . . . .  19
       5.2.3.  Intent Compliance Actions . . . . . . . . . . . . . .  20
       5.2.4.  Abstraction, Aggregation, Reporting . . . . . . . . .  20
   6.  Lifecycle . . . . . . . . . . . . . . . . . . . . . . . . . .  20
   7.  Additional Considerations . . . . . . . . . . . . . . . . . .  23
   8.  IANA Considerations . . . . . . . . . . . . . . . . . . . . .  23
   9.  Security Considerations . . . . . . . . . . . . . . . . . . .  23
   10. Acknowledgments . . . . . . . . . . . . . . . . . . . . . . .  25
   11. Informative References  . . . . . . . . . . . . . . . . . . .  25
   Authors' Addresses  . . . . . . . . . . . . . . . . . . . . . . .  27

Clemm, et al.             Expires March 6, 2022                 [Page 2]
Internet-Draft                                            September 2021

1.  Introduction

   Traditionally in the IETF, interest regarding management and
   operations has focused on individual network and device features.
   Standardization emphasis has generally been put on management
   instrumentation that needed to be provided to a networking device.  A
   prime example of this is SNMP-based management [RFC3411] and the 200+
   MIBs that have been defined by the IETF over the years.  More recent
   examples include YANG data model definitions [RFC7950] for aspects
   such as interface configuration, ACL configuration, and Syslog
   configuration.

   There is a clear sense and reality that managing networks by
   configuring myriads of "nerd knobs" on a device-by-device basis is no
   longer an option in modern network environments.  Significant
   challenges arise with keeping device configurations not only
   consistent across a network but also consistent with the needs of
   services and service features they are supposed to enable.
   Additional challenges arise with regards to being able to rapidly
   adapt the network as needed and to be able to do so at scale.  At the
   same time, operations need to be streamlined and automated wherever
   possible to not only lower operational expenses but also allow for
   rapid reconfiguration of networks at sub-second time scales and to
   ensure that networks are delivering their functionality as expected.
   Among other things, this requires the ability to consume operational
   data, perform analytics, and dynamically take actions in a way that
   is aware of context as well as intended outcomes at near real-time
   speeds.

   Accordingly, the IETF has begun to address end-to-end management
   aspects that go beyond the realm of individual devices in isolation.
   Examples include the definition of YANG models for network topology
   [RFC8345] or the introduction of service models used by service
   orchestration systems and controllers [RFC8309].  Much of the
   interest has been fueled by the discussion about how to manage
   autonomic networks, as discussed in the ANIMA working group.
   Autonomic networks are driven by the desire to lower operational
   expenses and make the management of the network as a whole more
   straightforward, putting it at odds with the need to manage the
   network one device and one feature at a time.  However, while
   autonomic networks are intended to exhibit "self-management"
   properties, they still require input from an operator or outside
   system to provide operational guidance and information about the
   goals, purposes, and service instances that the network is to serve.

   This input and operational guidance are commonly referred to as
   "intent," and networks that allow network operators to provide their
   input using intent as "Intent-Based Networks" (IBN) and the systems

Clemm, et al.             Expires March 6, 2022                 [Page 3]
Internet-Draft                                            September 2021

   that help implement intent as "Intent-Based Systems" (IBS).  However,
   intent is about more than just enabling a form of operator
   interaction with the network that involves higher-layer abstractions.
   It is also about the ability to let operators focus on what they want
   their desired outcomes to be while leaving details about how those
   outcomes would, in fact, be achieved to the IBN (respectively IBS).
   This, in turn, enables much greater operational efficiency at greater
   scale, in shorter time scales, with less dependency on human
   activities (and possibility for mistakes), and an ideal candidate,
   e.g., for artificial intelligence techniques that can bring about the
   next level of network automation [Clemm20].

   This vision has since caught on with the industry in a big way,
   leading to a significant number of solutions that offer Intent-Based
   Management that promise network providers to manage networks
   holistically at a higher level of abstraction and as a system that
   happens to consist of interconnected components, as opposed to a set
   of independent devices (that happen to be interconnected).  Those
   offerings include IBN and IBS (offering full a life-cycle of intent),
   SDN controllers (offering a single point of control and
   administration for a network), and network management and Operations
   Support Systems (OSS).

   It has been recognized for a long time that comprehensive management
   solutions cannot operate only at the level of individual devices and
   low-level configurations.  In this sense, the vision of intent is not
   entirely new.  In the past, ITU-T's model of a Telecommunications
   Management Network (TMN) introduced a set of management layers that
   defined a management hierarchy, consisting of network element,
   network, service, and business management [M3010].  High-level
   operational objectives would propagate in a top-down fashion from
   upper to lower layers.  The associated abstraction hierarchy was
   crucial to decompose management complexity into separate areas of
   concern.  This abstraction hierarchy was accompanied by an
   information hierarchy that concerned itself at the lowest level with
   device-specific information, but that would, at higher layers,
   include, for example, end-to-end service instances.  Similarly, the
   concept of Policy-Based Network Management (PBNM) has, for a long
   time, touted the ability to allow users to manage networks by
   specifying high-level management policies, with policy systems
   automatically "rendering" those policies, i.e., breaking them down
   into low-level configurations and control logic.  (As a note, in the
   context of this document, "users" generally refers to operators and
   administrators who are responsible for the management and operation
   of communication services and networking infrastructures, not to "end
   users" of communication services.)

Clemm, et al.             Expires March 6, 2022                 [Page 4]
Internet-Draft                                            September 2021

   What has been missing, however, is putting these concepts into a more
   current context and updating them to account for current technology
   trends.  This document clarifies the concepts behind intent.  It
   differentiates intent from related concepts.  It also provides an
   overview of first-order principles of IBN as well as the associated
   functionality.  The goal is to contribute to a common and shared
   understanding that can be used as a foundation to articulate research
   and engineering problems in the area of IBN.  It should be noted that
   the articulation of those problems is beyond the scope of this
   document.

2.  Definitions and Acronyms

      ACL: Access Control List

      API: Application Programming Interface

      Intent: A set of operational goals (that a network should meet)
      and outcomes (that a network is supposed to deliver), defined in a
      declarative manner without specifying how to achieve or implement
      them.

      IBA: Intent-Based Analytics - Analytics that are defined and
      derived from users' intent and used to validate the intended
      state.

      Intent-Based Management - The concept of performing management
      based on the concept of intent.

      IBN: Intent-Based Network - A network that can be managed using
      intent.

      IBS: Intent-Based System - A system that supports management
      functions that can be guided using intent.

      PBNM: Policy-Based Network Management

      Policy: A set of rules that governs the choices in behavior of a
      system.

      PDP: Policy Decision Point

      PEP: Policy Enforcement Point

      Service Model: A model that represents a service that is provided
      by a network to a user.

Clemm, et al.             Expires March 6, 2022                 [Page 5]
Internet-Draft                                            September 2021

      SSoT: Single Source of Truth - A functional block in an IBN system
      that normalizes users' intent and serves as the single source of
      data for the lower layers.

      SVoT: Single Version of Truth

      User: In the context of this document, an operator and/or
      administrator responsible for the management and operation of
      communication services and networking infrastructure (as opposed
      to an end user of a communication service)

3.  Introduction of Concepts

   The following section provides an overview of the concept of intent
   and Intent-Based Management.  It also provides an overview of the
   related concepts of service models and policies (and Policy-Based
   Network Management), and explains how they relate to intent and
   Intent-Based Management.

3.1.  Intent and Intent-Based Management

   In this document, intent is defined as a set of operational goals
   (that a network is supposed to meet) and outcomes (that a network is
   supposed to deliver), defined in a declarative manner without
   specifying how to achieve or implement them.

   The term "intent" was first introduced in the context of Autonomic
   Networks, where it is defined as "an abstract, high-level policy used
   to operate a network" [RFC7575].  According to this definition, an
   intent is a specific type of policy provided by a user to provide
   guidance to the Autonomic Network that would otherwise operate
   without human intervention.  However, to avoid using intent simply as
   a synonym for policy, a distinction that differentiates intent
   clearly from other types of policies needs to be introduced.

   Intent-Based Management aims to lead towards networks that are
   fundamentally simpler to manage and operate, requiring only minimal
   outside intervention.  Networks, even when they are autonomic, are
   not clairvoyant and have no way of automatically knowing particular
   operational goals nor which instances of networking services to
   support.  In other words, they do not know what the intent of the
   network provider is that gives the network the purpose of its being.
   This still needs to be communicated to the network by what informally
   constitutes intent.  That being said, the concept of intent is not
   limited just to autonomic networks, such as networks that feature an
   Autonomic Control Plane [I-D.ietf-anima-autonomic-control-plane], but
   applies to any network.

Clemm, et al.             Expires March 6, 2022                 [Page 6]
Internet-Draft                                            September 2021

   More specifically, intent is a declaration of a set of operational
   goals that a network is supposed to meet and outcomes that the
   network is supposed to deliver, without specifying how to achieve or
   how to implement them.  Those goals and outcomes are defined in a
   manner that is purely declarative - they specify what to accomplish,
   not how to achieve it.  Intent thus applies several important
   concepts simultaneously:

   o  It provides data abstraction: users do not need to be concerned
      with low-level device configuration and nerd knobs.

   o  It provides functional abstraction from particular management and
      control logic: users do not need to be concerned even with how to
      achieve a given intent.  What is specified is the desired outcome,
      with the IBS automatically figuring out a course of action (e.g.,
      using an algorithm or applying a set of rules derived from the
      intent) for how to achieve the outcome.

   The following are some examples of intent, expressed in natural
   language for the sake of clarity (actual interfaces used to convey
   intent may differ):

   o  "Steer networking traffic originating from endpoints in one
      geography away from a second geography, unless the destination
      lies in that second geography."  (States what to achieve, not
      how.)

   o  "Avoid routing networking traffic originating from a given set of
      endpoints (or associated with a given customer) through a
      particular vendor's equipment, even if this occurs at the expense
      of reduced service levels."  (States what to achieve, not how,
      providing additional guidance for how to trade off between
      different goals when necessary)

   o  "Maximize network utilization even if it means trading off service
      levels (such as latency, loss) unless service levels have
      deteriorated 20% or more from their historical mean."  (A desired
      outcome, with a set of constraints for additional guidance, which
      does not specify how to achieve this.)

   o  "VPN service must have path protection at all times for all
      paths."  (A desired outcome of which it may not be clear how it
      can be precisely accommodated.)

   o  "Generate in-situ OAM data and network telemetry for later offline
      analysis whenever significant fluctuations in latency across a
      path are observed."  (Goes beyond traditional event-condition-

Clemm, et al.             Expires March 6, 2022                 [Page 7]
Internet-Draft                                            September 2021

      action by not being specific about what constitutes "significant"
      and what specific data to collect)

   In contrast, the following are examples of what would not constitute
   intent (again, expressed in natural language for the sake of
   clarity):

   o  "Configure a given interface with an IP address."  This would be
      considered device configuration and fiddling with configuration
      knobs, not intent.

   o  "When interface utilization exceeds a specific threshold, emit an
      alert."  This would be a rule that can help support network
      automation, but a simple rule is not an intent.

   o  "Configure a VPN with a tunnel from A to B over path P."  This
      would be considered as a configuration of a service.

   o  "Deny traffic to prefix P1 unless it is traffic from prefix P2."
      This would be an example of an access policy or a firewall rule,
      not intent.

   In networks, in particular in networks that are deemed autonomic,
   intent should ideally be rendered by the network itself, i.e.,
   translated into device-specific rules and courses of action.
   Ideally, intent would not need to be orchestrated or broken down by a
   higher-level, centralized system but by the network devices
   themselves using a combination of distributed algorithms and local
   device abstractions.  In this idealized vision, because intent holds
   for the network as a whole, intent should ideally be automatically
   disseminated across all devices in the network, which can themselves
   decide whether they need to act on it.

   However, such decentralization will not be practical in all cases.
   Certain functions will need to be at least conceptually centralized.
   For example, users may require a single conceptual point of
   interaction with the network.  Likewise, the vast majority of network
   devices may be intent-agnostic and focus only (for example) on the
   actual forwarding of packets.  Many devices may also be constrained
   in their processing resources and hence their ability to act on
   intent.  Depending on the intent, not every devices needs to be aware
   of certain intent, for example when it does not affect them and when
   they play no role in achieving the desired outcome.  In addition,
   certain functions may benefit from global knowledge of a network and
   its state, which may not be known or too expensive to maintain or
   access from individual network devices.  This implies that certain
   intent functionality needs to be provided by functions that are
   specialized for that purpose (which, depending on the scenario, may

Clemm, et al.             Expires March 6, 2022                 [Page 8]
Internet-Draft                                            September 2021

   be hosted on dedicated systems or co-hosted with other networking
   functions).  For example, the translation of specific types of intent
   into corresponding courses of action and algorithms to achieve the
   desired outcomes may need to be provided by such specialized
   functions.  Of course, to avoid single points of failure, the
   implementation and hosting of those functions may still be
   distributed, even if conceptually centralized.

   Accordingly, an IBN is a network that can be managed using intent.
   This means that it is able to recognize and ingest intent of an
   operator or user and configure and adapt itself according to the user
   intent, achieving an intended outcome (i.e., a desired state or
   behavior) without requiring the user to specify the detailed
   technical steps for how to achieve the outcome.  Instead, the IBN
   will be able to figure out on its own how to achieve the outcome.
   Similarly, an IBS is a system that allows users to manage a network
   using intent.  Such a system will serve as a point of interaction
   with users and implement the functionality that is necessary to
   achieve the intended outcomes, interacting for that purpose with the
   network as required.

   Other definitions of intent exist, such as [TR523].  Intent there is
   simply defined as a declarative interface that is typically provided
   by a controller.  It implies the presence of a centralized function
   that renders the intent into lower-level policies or instructions and
   orchestrates them across the network.  While this is certainly one
   way of implementation, the definition that is presented here is more
   encompassing and ambitious, as it emphasizes the importance of
   managing the network by specifying desired outcomes without the
   specific steps to be taken in order to achieve the outcome.  A
   controller API that simply provides a network-level of abstraction is
   more limited and would not necessarily qualify as intent.  Likewise,
   ingestion and recognition of intent may not necessarily occur via a
   traditional API but may involve other types of human-machine
   interactions.

3.2.  Related Concepts

3.2.1.  Service Models

   A service model is a model that represents a service that is provided
   by a network to a user.  Per [RFC8309], a service model describes a
   service and its parameters in a portable/implementation-agnostic way
   that can be used independently of the equipment and operating
   environment on which the service is realized.  Two subcategories are
   distinguished: a "Customer Service Model" describes an instance of a
   service as provided to a customer, possibly associated with a service

Clemm, et al.             Expires March 6, 2022                 [Page 9]
Internet-Draft                                            September 2021

   order.  A "Service Delivery Model" describes how a service is
   instantiated over existing networking infrastructure.

   An example of a service could be a Layer 3 VPN service [RFC8299], a
   Network Slice [I-D.ietf-teas-ietf-network-slice-definition], or
   residential Internet access.  Service models represent service
   instances as entities in their own right.  Services have their own
   parameters, actions, and life-cycles.  Typically, service instances
   can be bound to end users of communication services, who might be
   billed for the services provided.

   Instantiating a service typically involves multiple aspects:

   o  A user (or northbound system) needs to define and/or request a
      service to be instantiated.

   o  Resources, such as IP addresses, AS numbers, VLAN or VxLAN pools,
      interfaces, bandwidth, or memory need to be allocated.

   o  How to map services to the resources needs to be defined.
      Multiple mappings are often possible, which to select may depend
      on context (such as which type of access is available to connect
      the end user of a communication service with the service).

   o  Bindings between upper and lower-level objects need to be
      maintained.

   o  Once instantiated, the service operational state needs to be
      validated and assured to ensure that the network indeed delivers
      the service as requested.

   The realization of service models involves a system, such as a
   controller, that provides provisioning logic.  This includes breaking
   down high-level service abstractions into lower-level device
   abstractions, identifying and allocating system resources, and
   orchestrating individual provisioning steps.  Orchestration
   operations are generally conducted using a "push" model in which the
   controller/manager initiates the operations as required, then pushes
   down the specific configurations to the device and validates whether
   the new changes have been accepted and the new operational/derived
   states are achieved and in sync with the intent/desired state.  In
   addition to instantiating and creating new instances of a service,
   updating, modifying, and decommissioning services need to be also
   supported.  The device itself typically remains agnostic to the
   service or the fact that its resources or configurations are part of
   a service/concept at a higher layer.

Clemm, et al.             Expires March 6, 2022                [Page 10]
Internet-Draft                                            September 2021

   Instantiated service models map to instantiated lower-layer network
   and device models.  Examples include instances of paths or instances
   of specific port configurations.  The service model typically also
   models dependencies and layering of services over lower-layer
   networking resources that are used to provide services.  This
   facilitates management by allowing to follow dependencies for
   troubleshooting activities, to perform impact analysis in which
   events in the network are assessed regarding their impact on services
   and customers.  Services are typically orchestrated and provisioned
   top-to-bottom, which also facilitates keeping track of the assignment
   of network resources (composition), while troubleshooted bottom-up
   (decomposition).  Service models might also be associated with other
   data that does not concern the network but provides business context.
   This includes things such as customer data (such as billing
   information), service orders and service catalogs, tariffs, service
   contracts, and Service Level Agreements (SLAs), including contractual
   agreements regarding remediation actions.

   [I-D.ietf-teas-te-service-mapping-yang] is an example of a data model
   that provides a mapping for customer service models (e.g., the L3VPN
   Service Model) to Traffic Engineering (TE) models (e.g., the TE
   Tunnel or the Abstraction and Control of Traffic Engineered Networks
   Virtual Network model)

   Like intent, service models provide higher layers of abstraction.
   Service models are often also complemented with mappings that capture
   dependencies between service and device or network configurations.
   Unlike intent, service models do not allow to define a desired
   "outcome" that would be automatically maintained by an IBS.  Instead,
   the management of service models requires the development of
   sophisticated algorithms and control logic by network providers or
   system integrators.

3.2.2.  Policy and Policy-Based Network Management

   Policy-Based Network Management (PBNM) is a management paradigm that
   separates the rules that govern the behavior of a system from the
   functionality of the system.  It promises to reduce maintenance costs
   of information and communication systems while improving flexibility
   and runtime adaptability.  It is present today at the heart of a
   multitude of management architectures and paradigms, including SLA-
   driven, Business-driven, autonomous, adaptive, and self-* management
   [Boutaba07].  The interested reader is asked to refer to the rich set
   of existing literature, which includes this and many other
   references.  In the following, we will only provide a much-abridged
   and distilled overview.

Clemm, et al.             Expires March 6, 2022                [Page 11]
Internet-Draft                                            September 2021

   At the heart of policy-based management is the concept of a policy.
   Multiple definitions of policy exist: "Policies are rules governing
   the choices in the behavior of a system" [Sloman94].  "Policy is a
   set of rules that are used to manage and control the changing and/or
   maintaining of the state of one or more managed objects"
   [Strassner03].  Common to most definitions is the definition of a
   policy as a "rule."  Typically, the definition of a rule consists of
   an event (whose occurrence triggers a rule), a set of conditions
   (which get assessed and which must be true before any actions are
   actually "fired"), and, finally, a set of one or more actions that
   are carried out when the condition holds.

   Policy-based management can be considered an imperative management
   paradigm: Policies precisely specified what needs to be done when and
   in which circumstance.  By using policies, management can, in effect,
   be defined as a set of simple control loops.  This makes policy-based
   management a suitable technology to implement autonomic behavior that
   can exhibit self-* management properties, including self-
   configuration, self-healing, self-optimization, and self-protection.
   This is notwithstanding the fact that policy-based management may
   make use of the concept of abstractions (such as, "Bob gets gold
   service") that hide from the user the specifics of how that
   abstraction is rendered in a particular deployment.

   Policies typically involve a certain degree of abstraction in order
   to cope with the heterogeneity of networking devices.  Rather than
   having a device-specific policy that defines events, conditions, and
   actions in terms of device-specific commands, parameters, and data
   models, a policy is defined at a higher level of abstraction
   involving a canonical model of systems and devices to which the
   policy is to be applied.  A policy agent on a controller or the
   device subsequently "renders" the policy, i.e., translates the
   canonical model into a device-specific representation.  This concept
   allows applying the same policy across a wide range of devices
   without needing to define multiple variants.  In other words - policy
   definition is de-coupled from policy instantiation and policy
   enforcement.  This enables operational scale and allows network
   operators and authors of policies to think in higher terms of
   abstraction than device specifics and be able to reuse the same,
   high-level definition across different networking domains, WAN, DC,
   or public cloud.

   PBNM is typically "push-based": Policies are pushed onto devices
   where they are rendered and enforced.  The push operations are
   conducted by a manager or controller, which is responsible for
   deploying policies across the network and monitoring their proper
   operation.  That being said, other policy architectures are possible.
   For example, policy-based management can also include a pull-

Clemm, et al.             Expires March 6, 2022                [Page 12]
Internet-Draft                                            September 2021

   component in which the decision regarding which action to take is
   delegated to a so-called Policy Decision Point (PDP).  This PDP can
   reside outside the managed device itself and has typically global
   visibility and context with which to make policy decisions.  Whenever
   a network device observes an event that is associated with a policy
   but lacks the full definition of the policy or the ability to reach a
   conclusion regarding the expected action, it reaches out to the PDP
   for a decision (reached, for example, by deciding on an action based
   on various conditions).  Subsequently, the device carries out the
   decision as returned by the PDP - the device "enforces" the policy
   and hence acts as a PEP (Policy Enforcement Point).  Either way, PBNM
   architectures typically involve a central component from which
   policies are deployed across the network and/or policy decisions
   served.

   Like Intent, policies provide a higher layer of abstraction.  Policy
   systems are also able to capture dynamic aspects of the system under
   management through the specification of rules that allow defining
   various triggers for specific courses of action.  Unlike intent, the
   definition of those rules (and courses of action) still needs to be
   articulated by users.  Since the intent is unknown, conflict
   resolution within or between policies requires interactions with a
   user or some kind of logic that resides outside of PBNM.  In that
   sense, policy constitutes a lower level of abstraction than intent,
   and it is conceivable for Intent-Based Systems to generate policies
   that are subsequently deployed by a PBNM system, allowing PBNM to
   support Intent-Based Networking.

3.2.3.  Distinguishing between Intent, Policy, and Service Models

   What Intent, Policy, and Service Models all have in common is the
   fact that they involve a higher-layer of abstraction of a network
   that does not involve device-specifics, that generally transcends
   individual devices, and that makes the network easier to manage for
   applications and human users compared to having to manage the network
   one device at a time.  Beyond that, differences emerge.

   Summarized differences:

   o  A service model is a data model that is used to describe instances
      of services that are provided to customers.  A service model has
      dependencies on lower-level models (device and network models)
      when describing how the service is mapped onto the underlying
      network and IT infrastructure.  Instantiating a service model
      requires orchestration by a system; the logic for how to
      orchestrate/manage/provide the service model and how to map it
      onto underlying resources is not included as part of the model
      itself.

Clemm, et al.             Expires March 6, 2022                [Page 13]
Internet-Draft                                            September 2021

   o  Policy is a set of rules, typically modeled around a variation of
      events/conditions/actions, used to express simple control loops
      that can be rendered by devices without requiring intervention by
      the outside system.  Policies let users define what to do under
      what circumstances, but they do not specify the desired outcome.

   o  Intent is a high-level, declarative goal that operates at the
      level of a network and services it provides, not individual
      devices.  It is used to define outcomes and high-level operational
      goals, without specifying how those outcomes should be achieved or
      how goals should specifically be satisfied, and without the need
      to enumerate specific events, conditions, and actions.  Which
      algorithm or rules to apply can be automatically "learned/derived
      from intent" by the IBS.  In the context of autonomic networking,
      intent is ideally rendered by the network itself; also, the
      dissemination of intent across the network and any required
      coordination between nodes is resolved by the network without the
      need for external systems.

   One analogy to capture the difference between policy and Intent-Based
   Systems is that of Expert Systems and Learning Systems in the field
   of Artificial Intelligence.  Expert Systems operate on knowledge
   bases with rules that are supplied by users, analogous to policy
   systems whose policies are supplied by users.  They are able to make
   automatic inferences based on those rules but are not able to "learn"
   new rules on their own.  Learning Systems (popularized by deep
   learning and neural networks), on the other hand, are able to learn
   without depending on user programming or articulation of rules.
   However, they do require a learning or training phase requiring large
   data sets; explanations of actions that the system actually takes
   provide a different set of challenges.  Analogous to intent-based
   systems, users focus on what they would like the learning system to
   accomplish but not how to do it.

4.  Principles

   The following main operating principles allow characterizing the
   intent-based/-driven/-defined nature of a system.

   1.  Single Source of Truth (SSoT) and Single Version/View of Truth
       (SVoT).  The SSoT is an essential component of an intent-based
       system as it enables several important operations.  The set of
       validated intent expressions is the system's SSoT.  SSoT and the
       records of the operational states enable comparing the intended/
       desired state and actual/operational states of the system and
       determining drift between them.  SSoT and the drift information
       provide the basis for corrective actions.  If the IBS is equipped
       with the means to predict states, it can further develop

Clemm, et al.             Expires March 6, 2022                [Page 14]
Internet-Draft                                            September 2021

       strategies to anticipate, plan, and pro-actively act on any
       diverging trends with the aim to minimize their impact.  Beyond
       providing a means for consistent system operation, SSoT also
       allows for better traceability to validate if/how the initial
       intent and associated business goals have been properly met, to
       evaluate the impacts of changes in the intent parameters and
       impacts and effects of the events occurring in the system.
       Single Version (or View) of Truth derives from the SSoT and can
       be used to perform other operations, such as querying, polling,
       or filtering measured and correlated information in order to
       create so-called "views."  These views can serve the users of the
       intent-based system.  In order to create intents as single
       sources of truth, the IBS must follow well-specified and well-
       documented processes and models.  In other contexts, SSoT is also
       referred to as the invariance of the intent [Lenrow15].

   2.  One-touch but not one-shot.  In an ideal intent-based system, the
       user expresses intent in one form or another, and then the system
       takes over all subsequent operations (one-touch).  A zero-touch
       approach could also be imagined in the case where the intent-
       based system has the capabilities or means to recognize
       intentions in any form of data.  However, the zero- or one-touch
       approach should not distract from the fact that reaching the
       state of a well-formed and valid intent expression is not a one-
       shot process.  On the contrary, the interfacing between the user
       and the intent-based system could be designed as an interactive
       and iterative process.  Depending on the level of abstraction,
       the intent expressions may initially contain more or less
       implicit parts and unprecise or unknown parameters and
       constraints.  The role of the intent-based system is to parse,
       understand, and refine the intent expression to reach a well-
       formed and valid intent expression that can be further used by
       the system for the fulfillment and assurance operations.  An
       intent refinement process could use a combination of iterative
       steps involving the user to validate the proposed refined intent
       and to ask the user for clarifications in case some parameters or
       variables could not be deduced or learned by means of the system
       itself.  In addition, the Intent-Based System will need to
       moderate between conflicting intent, helping users to properly
       choose between intent alternatives that may have different
       ramifications.

   3.  Autonomy and Supervision.  A desirable goal for an intent-based
       system is to offer a high degree of flexibility and freedom on
       both the user side and system side, e.g., by giving the user the
       ability to express intents using the user's own terms, by
       supporting different forms of expression of intents and being
       capable of refining the intent expressions to well-formed and

Clemm, et al.             Expires March 6, 2022                [Page 15]
Internet-Draft                                            September 2021

       exploitable expressions.  The dual principle of autonomy and
       supervision allows operating a system that will have the
       necessary levels of autonomy to conduct its tasks and operations
       without requiring the intervention of the user and taking its own
       decisions (within its areas of concern and span of control) as
       how to perform and meet the user expectations in terms of
       performance and quality, while at the same time providing the
       proper level of supervision to satisfy the user requirements for
       reporting and escalation of relevant information.

   4.  Learning.  An intent-based system is a learning system.  In
       contrast to an imperative-type of system, such as Event-
       Condition-Action policy rules, where the user defines beforehand
       the expected behavior of the system to various events and
       conditions, in an intent-based system, the user only declares
       what the system is supposed to achieve and not how to achieve
       these goals.  There is thus a transfer of reasoning/rationality
       from the human (domain knowledge) to the system.  This transfer
       of cognitive capability also implies the availability in the
       intent-based system of capabilities or means for learning,
       reasoning, and knowledge representation and management.  The
       learning abilities of an IBS can apply to different tasks such as
       optimization of the intent rendering or intent refinement
       processes.  The fact that an intent-based system is a
       continuously evolving system creates the condition for continuous
       learning and optimization.  Other cognitive capabilities such as
       planning can also be leveraged in an intent-based system to
       anticipate or forecast future system state and response to
       changes in intents or network conditions and thus elaboration of
       plans to accommodate the changes while preserving system
       stability and efficiency in a trade-off with cost and robustness
       of operations.

   5.  Capability exposure.  Capability exposure consists in the need
       for expressive network capabilities, requirements, and
       constraints to be able to compose/decompose intents and map the
       user's expectations to the system capabilities.

   6.  Abstract and outcome-driven.  Users do not need to be concerned
       with how intent is achieved and are empowered to think in terms
       of outcomes.  In addition, they can refer to concepts at a higher
       level of abstractions, independent e.g. of vendor-specific
       renderings.

   The described principles are perhaps the most prominent, but they are
   not an exhaustive list.  There are additional aspects to consider,
   such as:

Clemm, et al.             Expires March 6, 2022                [Page 16]
Internet-Draft                                            September 2021

   o  Intent targets are not individual devices but typically
      aggregations (such as groups of devices adhering to a common
      criteria, such as devices of a particular role) or abstractions
      (such as service types, service instances, topologies).

   o  Abstraction and inherent virtualization: agnostic to
      implementation details.

   o  Human-tailored network interaction: IBN should speak the language
      of the user as opposed to requiring the user to speak the language
      of the device/network.

   o  Explainability as an important IBN function, detection and IBN-
      aided resolution of conflicting intent, reconciliation of what the
      user wants and what the network can actually do.

   o  Inherent support, verification, and assurance of trust.

   All of these principles and considerations have implications on the
   design of intent-based systems and their supporting architecture.
   Accordingly, they need to be considered when deriving functional and
   operational requirements.

5.  Intent-Based Networking - Functionality

   Intent-Based Networking involves a wide variety of functions that can
   be roughly divided into two categories:

   o  Intent Fulfillment provides functions and interfaces that allow
      users to communicate intent to the network and that perform the
      necessary actions to ensure that intent is achieved.  This
      includes algorithms to determine proper courses of action and
      functions that learn to optimize outcomes over time.  In addition,
      it also includes more traditional functions such as any required
      orchestration of coordinated configuration operations across the
      network and rendering of higher-level abstractions into lower-
      level parameters and control knobs.

   o  Intent Assurance provides functions and interfaces that allow
      users to validate and monitor that the network is indeed adhering
      to and complying with intent.  This is necessary to assess the
      effectiveness of actions taken as part of fulfillment, providing
      important feedback that allows those functions to be trained or
      tuned over time to optimize outcomes.  In addition, Intent
      Assurance is necessary to address "intent drift."  Intent is not
      meant to be transactional, i.e. "set and forget", but expected to
      be remain in effect over time (unless explicitly stated
      otherwise).  Intent drift occurs when a system originally meets

Clemm, et al.             Expires March 6, 2022                [Page 17]
Internet-Draft                                            September 2021

      the intent, but over time gradually allows its behavior to change
      or be affected until it no longer does or does so in a less
      effective manner.

   The following sections provide a more comprehensive overview of those
   functions.

5.1.  Intent Fulfillment

   Intent fulfillment is concerned with the functions that take intent
   from its origination by a user (generally, an administrator of the
   responsible organization) to its realization in the network.

5.1.1.  Intent Ingestion and Interaction with Users

   The first set of functions is concerned with "ingesting" intent,
   i.e., obtaining intent through interactions with users.  They provide
   functions that recognize intent from interaction with the user as
   well as functions that allow users to refine their intent and
   articulate it in such ways so that it becomes actionable by an
   Intent-Based System.  Typically, those functions go beyond those
   provided by a traditional API, although APIs may still be provided
   (and needed for interactions beyond human users, i.e., with other
   machines).  Many cases would also involve a set of intuitive and
   easy-to-navigate workflows that guide users through the intent
   ingestion phase, making sure that all inputs that are necessary for
   intent modeling and consecutive translation have been gathered.  They
   may support unconventional human-machine interactions, in which a
   human will not simply give simple commands but which may involve a
   human-machine dialog to provide clarifications, to explain
   ramifications and trade-offs, and to facilitate refinements.

   The goal is ultimately to make IBSs as easy and natural to use and
   interact with as possible, in particular allowing human users to
   interact with the IBS in ways that do not involve a steep learning
   curve that forces the user to learn the "language" of the system.
   Ideally, it will be the Intent-Based Systems that is increasingly be
   able to learn how to understand the user as opposed to the other way
   round.  Of course, further research will be required to make this a
   reality.

5.1.2.  Intent Translation

   A second set of functions needs to translate user intent into courses
   of action and requests to take against the network, which will be
   meaningful to network configuration and provisioning systems.  These
   functions lie at the core of IBS, bridging the gap between
   interaction with users on the one hand and the traditional management

Clemm, et al.             Expires March 6, 2022                [Page 18]
Internet-Draft                                            September 2021

   and operations side that will need to orchestrate provisioning and
   configuration across the network.

   Beyond merely breaking down a higher layer of abstraction (intent)
   into a lower layer of abstraction (policies, device configuration),
   Intent Translation functions can be complemented with functions and
   algorithms that perform optimizations and that are able to learn and
   improve over time in order to result in the best outcomes,
   specifically in cases where multiple ways of achieving those outcomes
   are conceivable.  For example, satisfying an intent may involve
   computation of paths and other parameters that will need to be
   configured across the network.  Heuristics and algorithms to do so
   may evolve over time to optimize outcomes that may depend on a myriad
   of dynamic network conditions and context.

5.1.3.  Intent Orchestration

   A third set of functions deals with the actual configuration and
   provisioning steps that need to be orchestrated across the network
   and that were determined by the previous intent translation step.

5.2.  Intent Assurance

   Intent assurance is concerned with the functions that are necessary
   to ensure that the network indeed complies with the desired intent
   once it has been fulfilled.

5.2.1.  Monitoring

   A first set of assurance functions monitors and observes the network
   and its exhibited behavior.  This includes all the usual assurance
   functions such as monitoring the network for events and performance
   outliers, performing measurements to assess service levels that are
   being delivered, generating and collecting telemetry data.
   Monitoring and observation are required as the basis for the next set
   of functions that assess whether the observed behavior is in fact in
   compliance with the behavior that is expected based on the intent.

5.2.2.  Intent Compliance Assessment

   At the core of Intent Assurance are functions that compare the actual
   network behavior that is being monitored and observed with the
   intended behavior that is expected per the intent and is held by
   SSoT.  These functions continuously assess and validate whether the
   observation indicates compliance with intent.  This includes
   assessing the effectiveness of intent fulfillment actions, including
   verifying that the actions had the desired effect and assessing the
   magnitude of the effect as applicable.  It can also include functions

Clemm, et al.             Expires March 6, 2022                [Page 19]
Internet-Draft                                            September 2021

   that perform analysis and aggregation of raw observation data.  The
   results of the assessment can be fed back to facilitate learning
   functions that optimize outcomes.

   Intent compliance assessment also includes assessing whether intent
   drift occurs over time.  Intent drift can be caused by a control
   plane or lower-level management operations that inadvertently cause
   behavior changes which conflict with intent that was orchestrated
   earlier.  Intent-Based Systems and Networks need to be able to detect
   when such drift occurs or is about to occur as well as assess the
   severity of the drift.

5.2.3.  Intent Compliance Actions

   When intent drift occurs or network behavior is inconsistent with
   desired intent, functions that are able to trigger corrective actions
   are needed.  This includes actions needed to resolve intent drift and
   bring the network back into compliance.  Alternatively, and where
   necessary, reporting functions need to be triggered that alert
   operators and provide them with the necessary information and tools
   to react appropriately, e.g., by helping them articulate
   modifications to the original intent to moderate between conflicting
   concerns.

5.2.4.  Abstraction, Aggregation, Reporting

   The outcome of Intent Assurance needs to be reported back to the user
   in ways that allow the user to relate the outcomes to their intent.
   This requires a set of functions that are able to analyze, aggregate,
   and abstract the results of the observations accordingly.  In many
   cases, lower-level concepts such as detailed performance statistics
   and observations related to low-level settings need to be "up-
   leveled" to concepts the user can relate to and take action on.

   The required aggregation and analysis functionality needs to be
   complemented with functions that report intent compliance status and
   provide adequate summarization and visualization to human users.

6.  Lifecycle

   Intent is subject to a lifecycle: it comes into being, may undergo
   changes over the course of time, and may at some point be retracted.
   This lifecycle is closely tied to various interconnection functions
   that are associated with the intent concept.

   Figure 1 depicts an intent life-cycle and its main functions.  The
   functions were introduced in Section 5 and are divided into two
   functional (horizontal) planes, reflecting the distinction between

Clemm, et al.             Expires March 6, 2022                [Page 20]
Internet-Draft                                            September 2021

   fulfillment and assurance.  In addition, they are divided into three
   (vertical) spaces.

   The spaces indicate the different perspectives and interactions with
   different roles that are involved in addressing the functions:

   o  The User Space involves the functions that interface the network
      and intent-based system with the human user.  It involves the
      functions that allow users to articulate and the intent-based
      system to recognize that intent.  It also involves the functions
      that report back the status of the network relative to the intent
      and that allow users to assess outcomes and whether their intent
      has the desired effect.

   o  The Translation, or Intent-Based System (IBS) Space involves the
      functions that bridge the gap between intent users and the network
      operations infrastructure.  This includes the functions used to
      translate an intent into a course of action as well as the
      algorithms that are used to plan and optimize those courses of
      action also in consideration of feedback and observations from the
      network.  It also includes the functions to analyze and aggregate
      observations from the network in order to validate compliance with
      the intent and to take corrective actions as necessary.  In
      addition, it includes functions that abstract observations from
      the network in ways that relate them to the intent as communicated
      by users.  This facilitates the reporting functions in the user
      space.

   o  The Network Operations Space, finally, involves the traditional
      orchestration, configuration, monitoring, and measurement
      functions, which are used to effectuate the rendered intent and
      observe its effects on the network.

Clemm, et al.             Expires March 6, 2022                [Page 21]
Internet-Draft                                            September 2021

            User Space   :       Translation / IBS       :  Network Ops
                         :            Space              :     Space
                         :                               :
           +----------+  :  +----------+   +-----------+ : +-----------+
   Fulfill |recognize/|---> |translate/|-->|  learn/   |-->| configure/|
           |generate  |     |          |   |  plan/    |   | provision |
           |intent    |<--- |  refine  |   |  render   | : |           |
           +----^-----+  :  +----------+   +-----^-----+ : +-----------+
                |        :                       |       :        |
   .............|................................|................|.....
                |        :                  +----+---+   :        v
                |        :                  |validate|   :  +----------+
                |        :                  +----^---+ <----| monitor/ |
   Assure   +---+---+    :  +---------+    +-----+---+   :  | observe/ |
            |report | <---- |abstract |<---| analyze | <----|          |
            +-------+    :  +---------+    |aggregate|   :  +----------+
                         :                 +---------+   :

                        Figure 1: Intent Lifecycle

   When carefully inspecting the diagram, it becomes apparent that the
   intent lifecycle, in fact, involves two cycles, or loops:

   o  The "inner" intent control loop between IBS and Network Operations
      space is completely autonomic and does not involve any human in
      the loop.  It represents closed-loop automation that involves
      automatic analysis and validation of intent based on observations
      from the network operations space.  Those observations are fed
      into the function that plans the rendering of networking intent in
      order to make adjustments as needed in the configuration of the
      network.  The loop addresses and counteracts any intent drift that
      may be occuring, using observations to assess the degree of the
      network's intent compliance and automatically prompting actions to
      address any discrepancies.  Likewise, the loop allows to assess
      the effectiveness of any actions that are taken in order to
      continuously learn and improve how intent needs to be rendered in
      order to achieve the desired outcomes.

   o  The "outer" intent control loop extends to the user space.  It
      includes the user taking action and adjusting their intent based
      on observations and feedback from the IBS.  Intent is thus
      subjected to a lifecycle: It comes into being, may undergo
      refinements, modifications, and changes of time, and may at some
      point in time even get retracted.

Clemm, et al.             Expires March 6, 2022                [Page 22]
Internet-Draft                                            September 2021

7.  Additional Considerations

   Given the popularity of the term "intent," it is tempting to broaden
   it use to encompass also other related concepts, resulting in
   "intent-washing" that paints those concepts in a new light by simply
   applying new intent terminology to them.  A common example concerns
   referring to the northbound interface of SDN controllers as "intent
   interface".  However, in some cases, this actually makes sense not
   just as a marketing ploy but as a way to better relate previously
   existing and new concepts.

   In that sense and regards to intent, it makes sense to distinguish
   various subcategories of intent as follows:

   o  Operational Intent: defines intent related to operational goals of
      an operator; corresponds to the original "intent" term and the
      concepts defined in this document.

   o  Rule Intent: a synonym for policy rules regarding what to do when
      certain events occur.

   o  Service intent: a synonym for customer service model [RFC8309].

   o  Flow Intent: A synonym for a Service Level Objective for a given
      flow.

   A comprehensive set of classifications of different concepts and
   categories of intent will be described in a separate document.

8.  IANA Considerations

   Not applicable

9.  Security Considerations

   This document describes concepts and definitions of Intent-Based
   Networking.  As such, the below security considerations remain high
   level, i.e. in the form of principles, guidelines or requirements.
   More detailed security considerations will be described in the
   documents that specify the architecture and functionality.

   Security in Intent-Based Networking can apply to different facets:

   o  Securing the intent-based system itself.

   o  Mitigating the effects of erroneous, harmful or compromised
      intents.

Clemm, et al.             Expires March 6, 2022                [Page 23]
Internet-Draft                                            September 2021

   o  Expressing security policies or security-related parameters with
      intents.

   Securing the intent-based system aims at making the intent-based
   system operationally secure by implementing security mechanisms and
   applying security best practices.  In the context of Intent-based
   Networking, such mechanisms and practices may consist in intent
   verification and validation; operations on intents by authenticated
   and authorized users only; protection against or detection of
   tampered intents.  Such mechanisms may also include the introduction
   of multiple levels of intent.  For example, intent related to
   securing the network should occur at a "deeper" level that overrides
   other levels of intent if necessary, and that is not subject to
   modification through regular operations but through ones that are
   specifically secured.  Use of additional mechanisms such as
   explanation components that describe the security ramifications and
   trade-off should be considered as well.

   Mitigating the effects of erroneous or compromised intents aims at
   making the intent-based system operationally safe by providing
   checkpoint and safeguard mechanisms and operating principles.  In the
   context of Intent-based Networking, such mechanisms and principles
   may consist in the ability to automatically detect unintended,
   detrimental or abnormal behavior; the ability to automatically (and
   gracefully) rollback or fallback to a previous "safe" state; the
   ability to prevent or contain error amplification (due to the
   combination of a higher degree of automation and the intrinsic higher
   degree of freedom, ambiguity, and implicitly conveyed by intents);
   dynamic levels of supervision and reporting to make the user aware of
   the right information, at the right time with the right level of
   context.  Erroneous or harmful intents may inadvertently propagate
   and compromise security.  In addition, compromised intents, for
   example, intent forged by an inside attacker, may sabotage or harm
   the network resources and make them vulnerable to further, larger
   attacks, e.g., by defeating certain security mechanisms.

   Expressing security policies or security-related parameters with
   intents consists of using the intent formalism (a high-level,
   declarative abstraction), or part(s) of an intent statement to define
   security-related aspects such as data governance, level(s) of
   confidentiality in data exchange, level(s) of availability of system
   resources, of protection in forwarding paths, of isolation in
   processing functions, level(s) of encryption, authorized entities for
   given operations, etc.

   The development and introduction of Intent-Based Networking in
   operational environments will certainly create new security concerns.
   Such security concerns have to be anticipated at the design and

Clemm, et al.             Expires March 6, 2022                [Page 24]
Internet-Draft                                            September 2021

   specification time.  However, Intent-Based Networking may also be
   used as an enabler for better security.  For instance, security and
   privacy rules could be expressed in a more human-friendly and generic
   way and be less technology-specific and less complex, leading to
   fewer low-level configuration mistakes.  The detection of threats or
   attacks could also be made more simple and comprehensive thanks to
   conflict detection at higher-level or at coarser granularity

   More thorough security analyses should be conducted as our
   understanding of Intent-Based Networking technology matures.

10.  Acknowledgments

   We would like to thank the members of the IRTF Network Management
   Research Group (NMRG) for many valuable discussions and feedback.  In
   particular, we would like to acknowledge the feedback and support
   from Remi Badonnel, Walter Cerroni, Marinos Charalambides, Luis
   Contreras, Jerome Francois, Molka Gharbaoui, Olga Havel, Chen Li,
   William Liu, Barbara Martini, Stephen Mwanje, Jeferson Nobre, Haoyu
   Song, Peter Szilagyi, and Csaba Vulkan.  Of those, we would like to
   thank the following persons who went one step further and also
   provided reviews of the document: Remi Badonnel, Walter Cerroni,
   Jerome Francois, Molka Gharbaoui, Barbara Martini, Stephen Mwanje,
   Peter Szilagyi, and Csaba Vulkan.

11.  Informative References

   [Boutaba07]
              Boutaba, R. and I. Aib, "Policy-Based Management: A
              Historical perspective. Journal of Network and Systems
              Management (JNSM), Springer, Vol. 15 (4).", December 2007.

   [Clemm20]  Clemm, A., Faten Zhani, M., and R. Boutaba, "Network
              Management 2030: Operations and Control of Network 2030
              Services.  Journal of Network and Systems Management
              (JNSM), Springer, Vol. 28 (4).", October 2020.

   [I-D.ietf-anima-autonomic-control-plane]
              Eckert, T., Behringer, M. H., and S. Bjarnason, "An
              Autonomic Control Plane (ACP)", draft-ietf-anima-
              autonomic-control-plane-30 (work in progress), October
              2020.

   [I-D.ietf-teas-ietf-network-slice-definition]
              Rokui, R., Homma, S., Makhijani, K., Contreras, L. M., and
              J. Tantsura, "Definition of IETF Network Slices", draft-
              ietf-teas-ietf-network-slice-definition-01 (work in
              progress), February 2021.

Clemm, et al.             Expires March 6, 2022                [Page 25]
Internet-Draft                                            September 2021

   [I-D.ietf-teas-te-service-mapping-yang]
              Lee, Y., Dhody, D., Fioccola, G., Wu, Q., Ceccarelli, D.,
              and J. Tantsura, "Traffic Engineering (TE) and Service
              Mapping Yang Model", draft-ietf-teas-te-service-mapping-
              yang-08 (work in progress), August 2021.

   [Lenrow15]
              Lenrow, D., "Intent As The Common Interface to Network
              Resources, Intent Based Network Summit 2015 ONF Boulder:
              IntentNBI", February 2015.

   [M3010]    ITU-T, "M.3010 : Principles for a telecommunications
              management network.", February 2000.

   [RFC3411]  Harrington, D., Presuhn, R., and B. Wijnen, "An
              Architecture for Describing Simple Network Management
              Protocol (SNMP) Management Frameworks", STD 62, RFC 3411,
              DOI 10.17487/RFC3411, December 2002,
              <https://www.rfc-editor.org/info/rfc3411>.

   [RFC7575]  Behringer, M., Pritikin, M., Bjarnason, S., Clemm, A.,
              Carpenter, B., Jiang, S., and L. Ciavaglia, "Autonomic
              Networking: Definitions and Design Goals", RFC 7575,
              DOI 10.17487/RFC7575, June 2015,
              <https://www.rfc-editor.org/info/rfc7575>.

   [RFC7950]  Bjorklund, M., Ed., "The YANG 1.1 Data Modeling Language",
              RFC 7950, DOI 10.17487/RFC7950, August 2016,
              <https://www.rfc-editor.org/info/rfc7950>.

   [RFC8174]  Leiba, B., "Ambiguity of Uppercase vs Lowercase in RFC
              2119 Key Words", BCP 14, RFC 8174, DOI 10.17487/RFC8174,
              May 2017, <https://www.rfc-editor.org/info/rfc8174>.

   [RFC8299]  Wu, Q., Ed., Litkowski, S., Tomotaki, L., and K. Ogaki,
              "YANG Data Model for L3VPN Service Delivery", RFC 8299,
              DOI 10.17487/RFC8299, January 2018,
              <https://www.rfc-editor.org/info/rfc8299>.

   [RFC8309]  Wu, Q., Liu, W., and A. Farrel, "Service Models
              Explained", RFC 8309, DOI 10.17487/RFC8309, January 2018,
              <https://www.rfc-editor.org/info/rfc8309>.

   [RFC8345]  Clemm, A., Medved, J., Varga, R., Bahadur, N.,
              Ananthakrishnan, H., and X. Liu, "A YANG Data Model for
              Network Topologies", RFC 8345, DOI 10.17487/RFC8345, March
              2018, <https://www.rfc-editor.org/info/rfc8345>.

Clemm, et al.             Expires March 6, 2022                [Page 26]
Internet-Draft                                            September 2021

   [Sloman94]
              Sloman, M., "Policy Driven Management for Distributed
              Systems. Journal of Network and Systems Management (JNSM),
              Springer, Vol. 2 (4).", December 1994.

   [Strassner03]
              Strassner, J., "Policy-Based Network Management.
              Elsevier.", 2003.

   [TR523]    Foundation, O. N., "Intent NBI - Definition and
              Principles. ONF TR-523.", October 2016.

Authors' Addresses

   Alexander Clemm
   Futurewei
   2330 Central Expressway
   Santa Clara,  CA 95050
   USA

   Email: ludwig@clemm.org

   Laurent Ciavaglia
   Rakuten Mobile

   Email: laurent.ciavaglia@rakuten.com

   Lisandro Zambenedetti Granville
   Federal University of Rio Grande do Sul (UFRGS)
   Av. Bento Goncalves
   Porto Alegre  9500
   BR

   Email: granville@inf.ufrgs.br

   Jeff Tantsura
   Microsoft

   Email: jefftant.ietf@gmail.com

Clemm, et al.             Expires March 6, 2022                [Page 27]