Static pseudowire configuration checking using Generic Associated Channel (G-ACh) Advertisement Protocol
draft-jc-pwe3-static-config-check-01
Document | Type |
Expired Internet-Draft
(individual)
Expired & archived
|
|
---|---|---|---|
Authors | Lizhong Jin , Ran Chen , Sami Boutros , Sriganesh Kini | ||
Last updated | 2013-04-12 (Latest revision 2012-10-09) | ||
RFC stream | (None) | ||
Intended RFC status | (None) | ||
Formats | |||
Stream | Stream state | (No stream defined) | |
Consensus boilerplate | Unknown | ||
RFC Editor Note | (None) | ||
IESG | IESG state | Expired | |
Telechat date | (None) | ||
Responsible AD | (None) | ||
Send notices to | (None) |
This Internet-Draft is no longer active. A copy of the expired Internet-Draft is available in these formats:
Abstract
This document defines a method to verify the configuration parameters of static pseudowires (PW). Since a static PW can be independently provisioned at each end of the PW there is a potential for a configuration parameter mismatch and this can result in the PW not being operational. This document introduces a configuration checking protocol to simplify the provisioning and ease trouble shooting.
Authors
Lizhong Jin
Ran Chen
Sami Boutros
Sriganesh Kini
(Note: The e-mail addresses provided for the authors of this Internet-Draft may no longer be valid.)