Multi-chassis PON Protection in MPLS
draft-jiang-pwe3-mc-pon-03

Document Type Replaced Internet-Draft (individual)
Last updated 2015-04-30 (latest revision 2014-10-27)
Replaced by draft-ietf-pals-mc-pon
Stream (None)
Intended RFC status (None)
Formats
Expired & archived
pdf htmlized bibtex
Stream Stream state (No stream defined)
Consensus Boilerplate Unknown
RFC Editor Note (None)
IESG IESG state Replaced by draft-ietf-pals-mc-pon
Telechat date
Responsible AD (None)
Send notices to (None)

This Internet-Draft is no longer active. A copy of the expired Internet-Draft can be found at
https://www.ietf.org/archive/id/draft-jiang-pwe3-mc-pon-03.txt

Abstract

MPLS is being deployed deeper into operator networks, often to or past the access network node. Separately network access nodes such as PON OLTs have evolved to support first-mile access protection, where one or more physical OLTs provide first-mile diversity to the customer edge. Multi-homing support is needed on the MPLS-enabled PON OLT to provide resiliency for provided services. This document describes the multi-chassis PON protection architecture in MPLS and also proposes the ICCP extension to support it.

Authors

Yuanlong Jiang (jiangyuanlong@huawei.com)
Yong Luo (dennis.luoyong@huawei.com)
Edwin Mallette (edwin.mallette@gmail.com)
Yimin Shen (yshen@juniper.net)
Guangtao Zhou (zhouguangtao@chinaunicom.cn)
Chengbin Shen (shencb@sttri.com.cn)
Weiqiang Cheng (chengweiqiang@chinamobile.com)

(Note: The e-mail addresses provided for the authors of this Internet-Draft may no longer be valid.)