Multi-chassis PON Protection in MPLS
draft-jiang-pwe3-mc-pon-02

The information below is for an old version of the document
Document Type Expired Internet-Draft (individual)
Last updated 2014-10-03 (latest revision 2014-04-01)
Replaced by rfc8024, draft-ietf-pals-mc-pon
Stream (None)
Intended RFC status (None)
Formats
Expired & archived
pdf htmlized bibtex
Stream Stream state (No stream defined)
Consensus Boilerplate Unknown
RFC Editor Note (None)
IESG IESG state Expired
Telechat date
Responsible AD (None)
Send notices to (None)

This Internet-Draft is no longer active. A copy of the expired Internet-Draft can be found at
https://www.ietf.org/archive/id/draft-jiang-pwe3-mc-pon-02.txt

Abstract

MPLS is being deployed deeper into operator networks, often to or past the access network node. Separately network access nodes such as PON OLTs have evolved to support first-mile access protection, where one or more physical OLTs provide first-mile diversity to the customer edge. Multi-homing support is needed on the MPLS-enabled PON OLT to provide resiliency for provided services. This document describes the multi-chassis PON protection architecture in MPLS and also proposes the ICCP extension to support it.

Authors

Yuanlong Jiang (jiangyuanlong@huawei.com)
Yong Luo (dennis.luoyong@huawei.com)
Edwin Mallette (edwin.mallette@gmail.com)
Chengbin Shen (shencb@sttri.com.cn)
Yimin Shen (yshen@juniper.net)

(Note: The e-mail addresses provided for the authors of this Internet-Draft may no longer be valid.)