LDP Extensions for Hub & Spoke Multipoint Label Switched Path
draft-jjwl-mpls-mldp-hsmp-01

 
Document Type Replaced Internet-Draft (individual)
Last updated 2012-10-10 (latest revision 2012-09-03)
Replaces draft-jin-jounay-mpls-mldp-hsmp
Replaced by draft-ietf-mpls-mldp-hsmp
Stream (None)
Intended RFC status (None)
Formats
Expired & archived
plain text pdf html
Stream Stream state (No stream defined)
Document shepherd No shepherd assigned
IESG IESG state Replaced by draft-ietf-mpls-mldp-hsmp
Telechat date
Responsible AD (None)
Send notices to (None)

This Internet-Draft is no longer active. A copy of the expired Internet-Draft can be found at
https://www.ietf.org/archive/id/draft-jjwl-mpls-mldp-hsmp-01.txt

Abstract

This draft introduces a hub & spoke multipoint LSP (short for HSMP LSP), which allows traffic both from root to leaf through P2MP LSP and also leaf to root along the co-routed reverse path. That means traffic entering the HSMP LSP from application/customer at the root node travels downstream, exactly as if it was traveling downstream along a P2MP LSP to each leaf node, and traffic entering the HSMP LSP at any leaf node travels upstream along the tree to the root as if it is unicast to the root, except that it follows the path of the tree rather than ordinary unicast to the root.

Authors

Lizhong Jin (lizhong.jin@zte.com.cn)
Frederic JOUNAY (frederic.jounay@orange.ch)
IJsbrand Wijnands (ice@cisco.com)
Nicolai Leymann (n.leymann@telekom.de)

(Note: The e-mail addresses provided for the authors of this Internet-Draft may no longer be valid.)