Frame Relay Transport and Encapsulatiion over Psevdo-Wires
draft-kamapabhava-fr-pwe3-01
| Document | Type | Expired Internet-Draft (individual) | |
|---|---|---|---|
| Authors | Claude Kawa , Andrew G. Malis , Prayson Pate , Ravi Bail Bhat , Nishit Vasavada | ||
| Last updated | 2002-04-15 (Latest revision 2001-10-01) | ||
| Stream | (None) | ||
| Formats |
Expired & archived
plain text
htmlized
pdfized
bibtex
|
||
| Stream | Stream state | (No stream defined) | |
| Consensus boilerplate | Unknown | ||
| RFC Editor Note | (None) | ||
| IESG | IESG state | Expired | |
| Telechat date | (None) | ||
| Responsible AD | (None) | ||
| Send notices to | (None) |
https://www.ietf.org/archive/id/draft-kamapabhava-fr-pwe3-01.txt
Abstract
This document defines frame relay pseudo-wire specific aspects. A frame relay pseudo wire exists between network edge nodes and support as faithfully as possible an instance of a frame relay service. A frame relay pseudo-wire is a mechanism that allows frame relay protocol control information and payload to be carried over IP or MPLS Packet Switched Networks.
Authors
Claude Kawa
Andrew G. Malis
Prayson Pate
Ravi Bail Bhat
Nishit Vasavada
(Note: The e-mail addresses provided for the authors of this Internet-Draft may no longer be valid.)