Skip to main content

ReSerVation Protocol with Traffic Engineering extensions.Extension for Label Switched Path estoration
draft-kini-rsvp-lsp-restoration-00

Document Type Expired Internet-Draft (individual)
Expired & archived
Authors Sriganesh Kini , Murali Kodialam , T. V. Lakshman , Curtis Villamizar
Last updated 2000-11-08
RFC stream (None)
Intended RFC status (None)
Formats
Stream Stream state (No stream defined)
Consensus boilerplate Unknown
RFC Editor Note (None)
IESG IESG state Expired
Telechat date (None)
Responsible AD (None)
Send notices to (None)

This Internet-Draft is no longer active. A copy of the expired Internet-Draft is available in these formats:

Abstract

Traffic engineering using MPLS involves the setting up of label switched paths (LSP) possibly with explicit routing and with bandwidth guarantees. The reliability of these LSPs can be increased by providing a backup LSP onto which traffic can be switched upon failure of an element in the path of the active LSP. Backup LSPs can be routed in a way that bandwidth can be shared between backup links of more than one active path while still guaranteeing recoverability for a set of failures. This sharing greatly increases the network efficiency thereby increasing the number of LSPs that can be carried while maintaining guarantees. Algorithms which can route such recoverable LSPs while using only aggregate network usage information are being developed. Keeping these algorithms as the primary motivation this document describes a mechanism to signal shared backup LSPs using RSVP.

Authors

Sriganesh Kini
Murali Kodialam
T. V. Lakshman
Curtis Villamizar

(Note: The e-mail addresses provided for the authors of this Internet-Draft may no longer be valid.)