Multi-path Label Switched Paths Signaled Using RSVP-TE
draft-kompella-mpls-rsvp-ecmp-02

The information below is for an old version of the document
Document Type Expired Internet-Draft (individual)
Author Kireeti Kompella 
Last updated 2013-04-25 (latest revision 2012-10-22)
Stream (None)
Formats
Expired & archived
pdf htmlized bibtex
Stream Stream state (No stream defined)
Consensus Boilerplate Unknown
RFC Editor Note (None)
IESG IESG state Expired
Telechat date
Responsible AD (None)
Send notices to (None)

This Internet-Draft is no longer active. A copy of the expired Internet-Draft can be found at
https://www.ietf.org/archive/id/draft-kompella-mpls-rsvp-ecmp-02.txt

Abstract

This document describes extensions to Resource ReSerVation Protocol - Traffic Engineering for the set up of multi-path Traffic Engineered Label Switched Paths (LSPs) in Multi Protocol Label Switching and Generalized MPLS networks, i.e., LSPs that conform to traffic engineering constraints, but follow multiple independent paths from the source to the destination that allow load balancing.

Authors

Kireeti Kompella (kireeti.kompella@gmail.com)

(Note: The e-mail addresses provided for the authors of this Internet-Draft may no longer be valid.)