Skip to main content

SRH TLV Processing Programming
draft-li-spring-srh-tlv-processing-programming-03

The information below is for an old version of the document.
Document Type
This is an older version of an Internet-Draft whose latest revision state is "Active".
Expired & archived
Authors Cheng Li , Yang Xia , Dhruv Dhody , Zhenbin Li
Last updated 2023-02-08 (Latest revision 2022-08-07)
RFC stream (None)
Formats
Stream Stream state (No stream defined)
Consensus boilerplate Unknown
RFC Editor Note (None)
IESG IESG state Expired
Telechat date (None)
Responsible AD (None)
Send notices to (None)

This Internet-Draft is no longer active. A copy of the expired Internet-Draft is available in these formats:

Abstract

This document proposes a mechanism to program the processing rules of Segment Routig Header (SRH) optional TLVs explicitly on the ingress node. In this mechanism, there is no need to configure local configuration at the node to support SRH TLV processing. A network operator can program to process specific TLVs on specific segment endpoint nodes for specific packets on the ingress node, which is more efficient for SRH TLV processing.

Authors

Cheng Li
Yang Xia
Dhruv Dhody
Zhenbin Li

(Note: The e-mail addresses provided for the authors of this Internet-Draft may no longer be valid.)