SRv6 Service SID Flag Extension for Multi-homed SRv6 BGP Services
draft-liu-bess-multihome-srv6-service-sid-flag-00
Document | Type |
This is an older version of an Internet-Draft whose latest revision state is "Replaced".
Expired & archived
|
|
---|---|---|---|
Authors | Yisong Liu , Changwang Lin , Mengxiao Chen | ||
Last updated | 2023-08-28 (Latest revision 2023-02-24) | ||
RFC stream | (None) | ||
Formats | |||
Stream | Stream state | (No stream defined) | |
Consensus boilerplate | Unknown | ||
RFC Editor Note | (None) | ||
IESG | IESG state | Expired | |
Telechat date | (None) | ||
Responsible AD | (None) | ||
Send notices to | (None) |
This Internet-Draft is no longer active. A copy of the expired Internet-Draft is available in these formats:
Abstract
In some multi-homed SRv6 L3VPN and EVPN scenarios, there are requirements for the egress PE to advertise multiple SRv6 Service SIDs for the same service, such as anycast Service SID and bypass Service SID. This document defines anycast flag and bypass flag for SRv6 Service SIDs carried in BGP messages.
Authors
Yisong Liu
Changwang Lin
Mengxiao Chen
(Note: The e-mail addresses provided for the authors of this Internet-Draft may no longer be valid.)