Skip to main content

Dynamic IPv4 Provisioning for Lightweight 4over6
draft-liu-softwire-lw4over6-dhcp-deployment-05

Document Type Expired Internet-Draft (individual)
Expired & archived
Authors Cong Liu , Qi Sun , Jianping Wu
Last updated 2015-04-15 (Latest revision 2014-10-12)
RFC stream (None)
Intended RFC status (None)
Formats
Stream Stream state (No stream defined)
Consensus boilerplate Unknown
RFC Editor Note (None)
IESG IESG state Expired
Telechat date (None)
Responsible AD (None)
Send notices to (None)

This Internet-Draft is no longer active. A copy of the expired Internet-Draft is available in these formats:

Abstract

Lightweight 4over6 [I-D.ietf-softwire-lw4over6] is an IPv4 over IPv6 hub and spoke mechanism that provides overlay IPv4 services in an IPv6-only access network. Provisioning IPv4 addresses and port set to customers is the core function of Lightweight 4over6 control plane. [I-D.ietf-softwire-lw4over6] illustrates how to use DHCPv6 for deterministic IPv4 provisioning. This document discusses how to provision IPv4 parameters by using dynamic IPv4 provisioning protocols such as DHCPv4 over DHCPv6 [RFC7341]. This document describes a dynamic IPv4 provisioning mode for Lightweight 4over6 that uses DHCPv4 over DHCPv6 [RFC7341] for IPv4 address provisioning.

Authors

Cong Liu
Qi Sun
Jianping Wu

(Note: The e-mail addresses provided for the authors of this Internet-Draft may no longer be valid.)