L2VPN Signaling Using L2TPv3
draft-luo-l2tpext-l2vpn-signaling-02
| Document | Type |
Expired Internet-Draft
(individual)
Expired & archived
|
|
|---|---|---|---|
| Author | Wei Luo | ||
| Last updated | 2003-06-03 | ||
| RFC stream | (None) | ||
| Intended RFC status | (None) | ||
| Formats | |||
| Stream | Stream state | (No stream defined) | |
| Consensus boilerplate | Unknown | ||
| RFC Editor Note | (None) | ||
| IESG | IESG state | Expired | |
| Telechat date | (None) | ||
| Responsible AD | (None) | ||
| Send notices to | (None) |
This Internet-Draft is no longer active. A copy of the expired Internet-Draft is available in these formats:
Abstract
The Layer 2 Tunneling Protocol (L2TPv3) provides a standard method for setting up and managing L2TP sessions to tunnel a variety of L2 protocols. One of the reference models supported by L2TPv3 describes the use of an L2TP session to cross-connect two Layer 2 circuits attached to a pair of peering LACs. A cross-connect is a basic form of Layer 2 Virtual Private Networks (L2VPNs). This document describes mechanisms which utilize the building blocks that L2TP provides to construct different types of L2VPNs.
Authors
(Note: The e-mail addresses provided for the authors of this Internet-Draft may no longer be valid.)