Multiple IPv4 - IPv6 address mapping encapsulation - fixed prefix (M46E-FP)
draft-matsuhira-m46e-fp-08
The information below is for an old version of the document.
Document | Type |
This is an older version of an Internet-Draft whose latest revision state is "Active".
Expired & archived
|
|
---|---|---|---|
Author | Naoki Matsuhira | ||
Last updated | 2020-12-05 (Latest revision 2020-06-03) | ||
RFC stream | (None) | ||
Formats | |||
Stream | Stream state | (No stream defined) | |
Consensus boilerplate | Unknown | ||
RFC Editor Note | (None) | ||
IESG | IESG state | Expired | |
Telechat date | (None) | ||
Responsible AD | (None) | ||
Send notices to | (None) |
This Internet-Draft is no longer active. A copy of the expired Internet-Draft is available in these formats:
Abstract
This document specifies Multiple IPv4 - IPv6 address mapping encapsulation - fixed prefix (M46E-FP) specification. M46E-FP makes backbone network to IPv6 only. And also, M46E-FP can stack many IPv4 networks, i.e. the networks using same IPv4 (private) addresses, without interdependence.
Authors
(Note: The e-mail addresses provided for the authors of this Internet-Draft may no longer be valid.)