Skip to main content

A Uniform Resource Name Namespace for the EPCglobal Electronic Product Code (EPC) and Related Standards
draft-mealling-epc-urn-02

The information below is for an old version of the document that is already published as an RFC.
Document Type
This is an older version of an Internet-Draft that was ultimately published as RFC 5134.
Author Michael H. Mealling
Last updated 2020-01-21 (Latest revision 2007-08-07)
RFC stream Internet Engineering Task Force (IETF)
Intended RFC status Informational
Formats
Reviews
Stream WG state (None)
Document shepherd (None)
IESG IESG state Became RFC 5134 (Informational)
Action Holders
(None)
Consensus boilerplate Unknown
Telechat date (None)
Responsible AD Lisa M. Dusseault
Send notices to leslie@thinkingcat.com
draft-mealling-epc-urn-02
Network Working Group                                        M. Mealling
Internet-Draft                                  Refactored Networks, LLC
Expires: February 6, 2008                                 August 5, 2007

 A Uniform Resource Name Namespace For The EPCglobal Electronic Product
                    Code (EPC) and Related Standards
                     draft-mealling-epc-urn-02.txt

Status of this Memo

   By submitting this Internet-Draft, each author represents that any
   applicable patent or other IPR claims of which he or she is aware
   have been or will be disclosed, and any of which he or she becomes
   aware will be disclosed, in accordance with Section 6 of BCP 79.
   This document may not be modified, and derivative works of it may not
   be created, except to publish it as an RFC and to translate it into
   languages other than English.

   Internet-Drafts are working documents of the Internet Engineering
   Task Force (IETF), its areas, and its working groups.  Note that
   other groups may also distribute working documents as Internet-
   Drafts.

   Internet-Drafts are draft documents valid for a maximum of six months
   and may be updated, replaced, or obsoleted by other documents at any
   time.  It is inappropriate to use Internet-Drafts as reference
   material or to cite them other than as "work in progress."

   The list of current Internet-Drafts can be accessed at
   http://www.ietf.org/ietf/1id-abstracts.txt.

   The list of Internet-Draft Shadow Directories can be accessed at
   http://www.ietf.org/shadow.html.

   This Internet-Draft will expire on February 6, 2008.

Copyright Notice

   Copyright (C) The IETF Trust (2007).

Abstract

   This document describes URN namespaces that will identify various
   objects within the EPCglobal system for identifying products within
   ecommerce and supply chain management applications.

Mealling                Expires February 6, 2008                [Page 1]
Internet-Draft                 The EPC URN                   August 2007

1.  Introduction

   The EPCglobal Architecture Framework [6] is set of specifications for
   reading, managing and acting on object codes plus other sensor data
   as physical objects pass through a supply chain.  Events and metadata
   about physical objects are exchanged via EPC Information Services
   (EPCIS) that are essentially web services that implement agreed upon
   schema and interfaces.

   Each object that is tracked by the EPCglobal Architecture Framework
   is identified by one or more managed identifiers.  In many cases
   these identification systems existed prior to the Internet becoming
   widely used.  One such namespace is the Global Trade Item Number, or
   GTIN [7].  GTINs are widely used in global commerce and are managed
   by GS1.  In order for the EPCglobal Architecture Framework to
   leverage the Internet to the fullest extent possible, the GTIN
   namespace (and others such as Global Location Numbers (GLNs),
   Serialized Shipping Container Code (SSCC), etc [7]) need to be
   directly compatible with the URI family of identifiers.

   The use of GTINs, GLNs and SSCCs are all managed by GS1.  Their use
   within the EPCglobal Architecture Framework is mnaged by the GS1
   subsidiary known as EPCglobal, Inc. For these, and possibly future
   identification systems, a single Uniform Resource Name (URN)
   Namespace ID (NID) is being requested: 'epc'.  Each of the identifier
   namespaces mentioned will have a separate sub-space beneath the top
   level 'epc' NID.

   In addition to physical object identifiers, the EPCglobal
   Architecture Framework requires new namespaces for naming system
   components.  In many cases an interface within the EPCglobal
   Architecture Framework is XML [11] based and as such will require
   naming schemes for its XML schema [9] and various namespaces [10].
   For these uses, another Uniform Resource Name (URN) Namespace ID
   (NID) is being requested: 'epcglobal'.  Each specification or system
   component within the EPCglobal Architecture Framework will have a
   separate sub-space beneath the top level 'epcglobal' NID.

   Since the EPCglobal Architecture Framework is engineered for wide
   spread and general use, this namespace specification is a formal one
   and the namespace IDs that are being requested are 'epc' and
   'epcglobal'.  It is important to note that it is the explicit intent
   that various sub-namespaces of the 'epc' NID actually name real,
   physical objects and/or corporeal entities.  In contrast, sub-
   namespaces of the 'epcglobal' NID name logical or software constructs
   such as schema namespaces.

Mealling                Expires February 6, 2008                [Page 2]
Internet-Draft                 The EPC URN                   August 2007

2.  'epc' Registration Template

   Namespace ID:

         "epc" requested.

   Registration Information:

         Registration Version Number: 1
         Registration Date: 2005-02-15

   Declared registrant of the namespace:

         EPCglobal, Inc. is a subsidiary of GS1
         Princeton Pike Corporate Center
         1009 Lenox Drive, Suite 202
         Lawrenceville, NJ 08648, USA
         bhogan@epcglobalinc.org
         Tel: +1-609-620-4585

   Declaration of structure:

         The normative specification of the structure of the 'epc'
         namespace is "EPC Tag Data Standards" [5].  The examples given
         below are not normative.

         The 'epc' namespace is a set of sub-namespaces that can be
         extended in the future.  The following ABNF [2] defines how the
         sub-namespaces are identified and any restrictions on their
         syntax (definitions not specified below can be found in RFC
         2141 [1]):

   EPC-URN     = "urn:epc:" sub-ns-name ":" sub-ns
   sub-ns-name = let-num [ 1*let-num-hyp ]
   sub-ns      = 1*URN chars
   let-num     = upper / lower / number
   let-num-hyp = upper / lower / number / "-"
   upper       = %x41-5A ; "A" - "Z"
   lower       = %x61-7A ; "a" - "z"
   number      = "0" / "1" / "2" / "3" / "4" / "5" / "6" / "7" /
                 "8" / "9"

         For example, the sub-namespace 'sgtin' has the following
         definition (this ABNF is non-normative):

Mealling                Expires February 6, 2008                [Page 3]
Internet-Draft                 The EPC URN                   August 2007

   SGTIN-URI        = "urn:epc:id:sgtin:" SGTINURIBody
   SGTINURIBody     = 2*(PaddedNumericComponent ".") NumericComponent
   NumericComponent = ZeroComponent / NonZeroComponent
   ZeroComponent    = "0"
   NonZeroComponent = NonZeroDigit *Digit
   PaddedNumericComponent = *Digit
   Digit = "0" / NonZeroDigit
   NonZeroDigit = "1" / "2" / "3" / "4" / "5" / "6" / "7" / "8" / "9"

         This equates to a namespace that has three period separated
         series of digits:

                        urn:epc:id:sgtin:900100.0003456.1234567

         The first series is a company prefix, the 2nd denotes a product
         reference assigned by that company, and the third is a serial
         number for a specific instance of their product.  Note that
         leading zeros are significant.

   Relevant ancillary documentation:

         The standards that define the EPCglobal Architecture Framework
         and the processes for creating new sub-namespaces are managed
         by EPCglobal, Inc and can be found on its website.  Several
         sub-namespaces are defined in the "EPC Tag Data Standards" [5].

   Identifier uniqueness considerations:

         The namespaces that make up the 'epc' namespace are all managed
         by an organization with almost 50 years of namespace management
         experience.  In all cases (existing or new) the uniqueness of
         each namespace is an inherent part of the EPCglobal
         Architecture Framework.

   Identifier persistence considerations:

         The assignment process guarantees that names are not reassigned
         and that the binding between the name and and its resource is
         permanent, regardless of any standards or organizational
         changes.

   Process of identifier assignment:

         Names are assigned by the EPCglobal standards publication
         process and by any entities that are sub-delegated by
         EPCglobal.  It is important to note that in many cases the
         names assigned will explicitly denote physical objects and not
         an electronic representation of that object.

Mealling                Expires February 6, 2008                [Page 4]
Internet-Draft                 The EPC URN                   August 2007

   Process of identifier resolution:

         Certain sub-namespaces are resolved via the Object Naming
         Service which is defined in "Object Naming Service (ONS)
         Version 1.0" [4] which is a valid implementation of the Dynamic
         Delegation Discovery System that is defined in RFC 3401 [3].

   Rules for Lexical Equivalence:

         The entire URN is case-sensitive.

   Conformance with URN Syntax:

         There are no additional characters reserved except as noted in
         the ABNF above.

   Validation mechanism:

         In the case of each sub-namespace there will be namespace
         specific rules for determining validity.  In each case the
         reader is referred to the appropriate EPCglobal-maintained
         documentation.

   Scope:

         Global

3.  'epcglobal' Registration Template

   Namespace ID:

         "epcglobal" requested.

   Registration Information:

         Registration Version Number: 1
         Registration Date: 2007-03-06

   Declared registrant of the namespace:

         EPCglobal, Inc. is a subsidiary of GS1
         Princeton Pike Corporate Center

Mealling                Expires February 6, 2008                [Page 5]
Internet-Draft                 The EPC URN                   August 2007

         1009 Lenox Drive, Suite 202
         Lawrenceville, NJ 08648, USA
         bhogan@epcglobalinc.org
         Tel: +1-609-620-4585

   Declaration of structure:

         The normative specification of the structure of the 'epcglobal'
         namespace are various standards available at EPCglobal's public
         web site.  The examples given below are not normative.

         The 'epcglobal' namespace is a set of sub-namespaces that can
         be extended in the future.  The following ABNF defines how the
         sub-namespaces are identified and any restrictions on their
         syntax (definitions not specified below can be found in RFC
         2141 [1]):

   EPCGLOBAL-URN = "urn:epcglobal:" subnsname ":" subns
   subnsname     = let-num [ 1*let-num-hyp ]
   subns         = 1*URN chars
   let-num       = upper / lower / number
   let-num-hyp   = upper / lower / number / "-"
   upper         = %x41-5A ; "A" - "Z"
   lower         = %x61-7A ; "a" - "z"
   number        = "0" / "1" / "2" / "3" / "4" / "5" / "6" / "7" /
                   "8" / "9"

         For example, the identifier "urn:epcglobal:ale:xsd:1" is
         defined in the "Application Level Events 1.0 Specficiation" [8]
         for use as an XML namespace identifier for XML documents
         conforming to that specification.

   Relevant ancillary documentation:

         The standards that define the EPCglobal Architecture Framework
         and the processes for creating new sub-namespaces are managed
         by EPCglobal, Inc and can be found on its website.

   Identifier uniqueness considerations:

         The namespaces that make up the 'epcglobal' namespace are all
         managed by an organization with almost 50 years of namespace
         management experience.  In all cases the uniqueness of each
         namespace is an inherent part of the EPCglobal Architecture
         Framework.

Mealling                Expires February 6, 2008                [Page 6]
Internet-Draft                 The EPC URN                   August 2007

   Identifier persistence considerations:

         The assignment process guarantees that names are not reassigned
         and that the binding between the name and and its resource is
         permanent, regardless of any standards or organizational
         changes.

   Process of identifier assignment:

         Names are assigned by the EPCglobal, Inc. standards publication
         process.

   Process of identifier resolution:

         No resolution mechanism is required or provided.

   Rules for Lexical Equivalence:

         The entire URN is case-sensitive.

   Conformance with URN Syntax:

         There are no additional characters reserved except as noted in
         the ABNF above.

   Validation mechanism:

         In the case of each sub-namespace there will be namespace
         specific rules for determining validity.  In each case the
         reader is referred to the appropriate EPCglobal-maintained
         documentation.

   Scope:

         Global

4.  IANA Considerations

   This document includes two URN Namespace registrations that are to be
   entered into the IANA registry for URN NIDs.

5.  Namespace Considerations

   Due to EPCglobal Inc being a subsidiary of an internationally
   recognized authority for the identifiers embedded within the 'epc'

Mealling                Expires February 6, 2008                [Page 7]
Internet-Draft                 The EPC URN                   August 2007

   namespace, as well as being the internationally recognized standards
   body for the standards that define identifiers in the 'epcglobal'
   namespace, these namespaces represent the best approach to naming
   products and entities within the world of supply chain management and
   ecommerce in general.  There are no other alternative namespaces that
   have the level of authority and industry acceptance that the EPC
   does.

6.  Community Considerations

   The EPCglobal Architecture Framework is intended to bring the
   Internet to the world of supply chain management and beyond.  It can
   be used to tie physical objects to their virtual descriptions and as
   such has many wide ranging applications for the average Internet use.
   Thus it is very much the intent that this namespace and the entire
   EPCglobal Architecture Framework considers the entire Internet as the
   scope of its community.

7.  Security Considerations

   The EPCglobal Architecture Framework is based almost exclusively on
   Internet and Web standards.  Thus the security impacts of each of its
   underlying technologies should be examined for weaknesses and
   threats.  The primary threats will come from the fact that these
   names will identify physical things that can be of high value, thus
   the temptation to spoof metadata about that identifier (its cost,
   size, etc) will be much greater.  Therefore the role of digital
   signatures, secure resolution mechanisms and trust relationships is
   very fundamental to the system.

8.  References

8.1.  Normative References

   [1]   Moats, R., "URN Syntax", RFC 2141, May 1997.

   [2]   Crocker, D., Ed. and P. Overell, "Augmented BNF for Syntax
         Specifications: ABNF", RFC 4234, October 2005.

   [3]   Mealling, M., "Dynamic Delegation Discovery System (DDDS) Part
         One: The Comprehensive DDDS", RFC 3401, October 2002.

   [4]   EPCglobal, Inc., "EPCglobal Network Object Name Service (ONS)
         1.0", August 2003.

Mealling                Expires February 6, 2008                [Page 8]
Internet-Draft                 The EPC URN                   August 2007

   [5]   EPCglobal, Inc., "EPC(tm) Tag Data Standards Version 1.3",
         Feburary 2004.

   [6]   Traub, K., Allgair, G., Barthe, H., Burstein, L., Garrett, J.,
         Hogan, B., Rodrigues, B., Sarma, S., Schmidt, J., Schramek, C.,
         Stewart, R., and K. Suen, "The EPCglobal Architecture
         Framework", July 2005.

   [7]   GS1, "GS1 General Specifications v7.1", January 2007.

   [8]   EPCglobal, Inc., "The Application Level Events (ALE)
         Specification, Version 1.0", September 2005.

8.2.  Non-normative References

   [9]   Thompson, H., Maloney, M., Beech, D., and N. Mendelsohn, "XML
         Schema Part 1: Structures Second Edition", World Wide Web
         Consortium Recommendation REC-xmlschema-1-20041028,
         October 2004,
         <http://www.w3.org/TR/2004/REC-xmlschema-1-20041028>.

   [10]  Bray, T., Layman, A., Hollander, D., and R. Tobin, "Namespaces
         in XML 1.1", World Wide Web Consortium FirstEdition REC-xml-
         names11-20040204, February 2004,
         <http://www.w3.org/TR/2004/REC-xml-names11-20040204>.

   [11]  Maler, E., Paoli, J., Bray, T., Yergeau, F., and C. Sperberg-
         McQueen, "Extensible Markup Language (XML) 1.0 (Third
         Edition)", World Wide Web Consortium FirstEdition REC-xml-
         20040204, February 2004,
         <http://www.w3.org/TR/2004/REC-xml-20040204>.

Author's Address

   Michael Mealling
   Refactored Networks, LLC
   1635 Old Hwy 41
   Suite 112, Box 138
   Kennesaw, GA  30152
   US

   Phone: +1 678 581 9656
   Email: michael@refactored-networks.com
   URI:   http://www.refactored-networks.com

Mealling                Expires February 6, 2008                [Page 9]
Internet-Draft                 The EPC URN                   August 2007

Full Copyright Statement

   Copyright (C) The IETF Trust (2007).

   This document is subject to the rights, licenses and restrictions
   contained in BCP 78, and except as set forth therein, the authors
   retain all their rights.

   This document and the information contained herein are provided on an
   "AS IS" basis and THE CONTRIBUTOR, THE ORGANIZATION HE/SHE REPRESENTS
   OR IS SPONSORED BY (IF ANY), THE INTERNET SOCIETY, THE IETF TRUST AND
   THE INTERNET ENGINEERING TASK FORCE DISCLAIM ALL WARRANTIES, EXPRESS
   OR IMPLIED, INCLUDING BUT NOT LIMITED TO ANY WARRANTY THAT THE USE OF
   THE INFORMATION HEREIN WILL NOT INFRINGE ANY RIGHTS OR ANY IMPLIED
   WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE.

Intellectual Property

   The IETF takes no position regarding the validity or scope of any
   Intellectual Property Rights or other rights that might be claimed to
   pertain to the implementation or use of the technology described in
   this document or the extent to which any license under such rights
   might or might not be available; nor does it represent that it has
   made any independent effort to identify any such rights.  Information
   on the procedures with respect to rights in RFC documents can be
   found in BCP 78 and BCP 79.

   Copies of IPR disclosures made to the IETF Secretariat and any
   assurances of licenses to be made available, or the result of an
   attempt made to obtain a general license or permission for the use of
   such proprietary rights by implementers or users of this
   specification can be obtained from the IETF on-line IPR repository at
   http://www.ietf.org/ipr.

   The IETF invites any interested party to bring to its attention any
   copyrights, patents or patent applications, or other proprietary
   rights that may cover technology that may be required to implement
   this standard.  Please address the information to the IETF at
   ietf-ipr@ietf.org.

Acknowledgment

   Funding for the RFC Editor function is provided by the IETF
   Administrative Support Activity (IASA).

Mealling                Expires February 6, 2008               [Page 10]