MPLS-TP Pseudowire Configuration using OpenFlow 1.3
draft-medved-pwe3-of-config-01

 
Document Type Expired Internet-Draft (individual)
Last updated 2013-01-11 (latest revision 2012-07-10)
Stream (None)
Intended RFC status (None)
Formats
Expired & archived
plain text pdf html
Stream Stream state (No stream defined)
Document shepherd No shepherd assigned
IESG IESG state Expired
Telechat date
Responsible AD (None)
Send notices to (None)

Email authors IPR References Referenced by Nits Search lists

This Internet-Draft is no longer active. A copy of the expired Internet-Draft can be found at
https://www.ietf.org/archive/id/draft-medved-pwe3-of-config-01.txt

Abstract

This document describes a method by which MPLS-TP Pseudowires (PW) can be configured in an LER using OpenFlow 1.3. In addition to the configuration of PWs this document also specifies how to enact OAM for these PWs using standard IETF conventions defined by the GAL label method. The primary goal of this document is to provide a simple and yet flexible method for configuring PWs using standardized tools from the emerging SDN toolkit.

Authors

Jan Medved (jmedved@cisco.com)
Andrew McLachlan (amclachl@cisco.com)
David Meyer (dmm@cisco.com)

(Note: The e-mail addresses provided for the authors of this Internet-Draft may no longer be valid.)