BFD in Demand Mode over Point-to-Point MPLS LSP
draft-mirsky-bfd-mpls-demand-04
The information below is for an old version of the document.
| Document | Type |
This is an older version of an Internet-Draft whose latest revision state is "Active".
Expired & archived
|
|
|---|---|---|---|
| Author | Greg Mirsky | ||
| Last updated | 2019-06-21 (Latest revision 2018-12-18) | ||
| RFC stream | Internet Engineering Task Force (IETF) | ||
| Formats | |||
| Additional resources | Mailing list discussion | ||
| Stream | WG state | Call For Adoption By WG Issued | |
| Document shepherd | (None) | ||
| IESG | IESG state | Expired | |
| Consensus boilerplate | Unknown | ||
| Telechat date | (None) | ||
| Responsible AD | (None) | ||
| Send notices to | (None) |
This Internet-Draft is no longer active. A copy of the expired Internet-Draft is available in these formats:
Abstract
This document describes procedures for using Bidirectional Forwarding Detection (BFD) in Demand mode to detect data plane failures in Multiprotocol Label Switching (MPLS) point-to-point Label Switched Paths.
Authors
(Note: The e-mail addresses provided for the authors of this Internet-Draft may no longer be valid.)