Skip to main content

BFD for Multipoint Networks over Point-to-Multi-Point MPLS LSP
draft-mirsky-mpls-p2mp-bfd-03

The information below is for an old version of the document.
Document Type
This is an older version of an Internet-Draft whose latest revision state is "Replaced".
Expired & archived
Author Greg Mirsky
Last updated 2018-08-19 (Latest revision 2018-02-15)
Replaced by draft-ietf-mpls-p2mp-bfd
RFC stream (None)
Formats
Stream Stream state (No stream defined)
Consensus boilerplate Unknown
RFC Editor Note (None)
IESG IESG state Expired
Telechat date (None)
Responsible AD (None)
Send notices to (None)

This Internet-Draft is no longer active. A copy of the expired Internet-Draft is available in these formats:

Abstract

This document describes procedures for using Bidirectional Forwarding Detection (BFD) for multipoint networks to detect data plane failures in Multiprotocol Label Switching (MPLS) point-to-multipoint (p2mp) Label Switched Paths (LSPs). It also describes applicability of out- band solutions to bootstrap a BFD session in this environment.

Authors

Greg Mirsky

(Note: The e-mail addresses provided for the authors of this Internet-Draft may no longer be valid.)