Multicast state damping
draft-morin-multicast-damping-01
| Document | Type |
Replaced Internet-Draft
(individual)
Expired & archived
|
|
|---|---|---|---|
| Authors | Thomas Morin , Stephane Litkowski , Keyur Patel , Zhaohui (Jeffrey) Zhang , Robert Kebler , Jeffrey Haas | ||
| Last updated | 2014-10-27 (Latest revision 2014-01-14) | ||
| Replaced by | draft-morin-bess-multicast-damping | ||
| RFC stream | (None) | ||
| Intended RFC status | (None) | ||
| Formats | |||
| Stream | Stream state | (No stream defined) | |
| Consensus boilerplate | Unknown | ||
| RFC Editor Note | (None) | ||
| IESG | IESG state | Replaced by draft-morin-bess-multicast-damping | |
| Telechat date | (None) | ||
| Responsible AD | (None) | ||
| Send notices to | (None) |
This Internet-Draft is no longer active. A copy of the expired Internet-Draft is available in these formats:
Abstract
This document describes procedures to damp multicast routing state changes and prevent the churn due to the multicast dynamicity at the edge of a network. The procedures described in this document help avoid uncontrolled control plane load increase on the core routing infrastructure. New procedures are proposed inspired from BGP unicast route damping principles, but adapted to multicast. They cover multicast and multicast in VPNs contexts.
Authors
Thomas Morin
Stephane Litkowski
Keyur Patel
Zhaohui (Jeffrey) Zhang
Robert Kebler
Jeffrey Haas
(Note: The e-mail addresses provided for the authors of this Internet-Draft may no longer be valid.)