Skip to main content

LSP-Ping and BFD encapsulation over ACH
draft-nitinb-mpls-tp-lsp-ping-bfd-procedures-02

Document Type Replaced Internet-Draft (individual)
Authors Nitin Bahadur , Rahul Aggarwal , David Ward , Thomas Nadeau , Nurit Sprecher , Yaacov Weingarten
Last updated 2010-06-04 (Latest revision 2010-02-16)
Replaced by draft-ietf-mpls-tp-lsp-ping-bfd-procedures
Stream (None)
Formats
Expired & archived
plain text xml htmlized pdfized bibtex
Stream Stream state (No stream defined)
Consensus boilerplate Unknown
RFC Editor Note (None)
IESG IESG state Replaced by draft-ietf-mpls-tp-lsp-ping-bfd-procedures
Telechat date (None)
Responsible AD (None)
Send notices to (None)
This Internet-Draft is no longer active. A copy of the expired Internet-Draft can be found at:
https://www.ietf.org/archive/id/draft-nitinb-mpls-tp-lsp-ping-bfd-procedures-02.txt

Abstract

LSP-Ping and BFD for MPLS are existing and widely deployment OAM mechanisms for MPLS LSPs. This document describes ACH encapsulation for LSP-Ping, to enable use of LSP-Ping when IP addressing is not in use. This document also clarifies the use of BFD for MPLS LSPs using ACH encapsulation, when IP addressing may not be available and/or it may not be desirable to encapsulate BFD packets in IP.

Authors

Nitin Bahadur
Rahul Aggarwal
David Ward
Thomas Nadeau
Nurit Sprecher
Yaacov Weingarten

(Note: The e-mail addresses provided for the authors of this Internet-Draft may no longer be valid.)