Transition Requirements for IPv6 Customer Edge Routers
draft-palet-v6ops-rfc7084-bis-transition-01

Document Type Expired Internet-Draft (individual)
Last updated 2018-04-20 (latest revision 2017-10-17)
Stream (None)
Intended RFC status (None)
Formats
Expired & archived
plain text pdf html bibtex
Stream Stream state (No stream defined)
Consensus Boilerplate Unknown
RFC Editor Note (None)
IESG IESG state Expired
Telechat date
Responsible AD (None)
Send notices to (None)

This Internet-Draft is no longer active. A copy of the expired Internet-Draft can be found at
https://www.ietf.org/archive/id/draft-palet-v6ops-rfc7084-bis-transition-01.txt

Abstract

This document specifies the transition requirements for an IPv6 Customer Edge (CE) router. Specifically, this document extends the "Basic Requirements for IPv6-only Customer Edge Routers" ([RFC7084]) in order to allow the provisioning of IPv6 transition services for the hosts attached to it. The document covers several transition technologies, either for delivering IPv6 in IPv4-only access networks and specially for delivering IPv4 "as-a-service" as required in a world where IPv4 addresses are no longer available, so hosts in the customer LANs with IPv4-only or IPv6-only applications or devices, requiring to communicate with IPv4-only services at the Internet, are able to do so.

Authors

Jordi Palet (jordi.palet@consulintel.es)

(Note: The e-mail addresses provided for the authors of this Internet-Draft may no longer be valid.)