Basic Requirements for IPv6 Customer Edge Routers
draft-palet-v6ops-rfc7084-bis-01
| Document | Type |
Replaced Internet-Draft
(individual)
Expired & archived
|
|
|---|---|---|---|
| Author | Jordi Palet Martinez | ||
| Last updated | 2017-02-27 | ||
| Replaced by | draft-v6ops-rfc7084-bis, draft-ietf-v6ops-rfc7084-bis | ||
| RFC stream | (None) | ||
| Intended RFC status | (None) | ||
| Formats | |||
| Stream | Stream state | (No stream defined) | |
| Consensus boilerplate | Unknown | ||
| RFC Editor Note | (None) | ||
| IESG | IESG state | Replaced by draft-ietf-v6ops-rfc7084-bis, draft-v6ops-rfc7084-bis | |
| Telechat date | (None) | ||
| Responsible AD | (None) | ||
| Send notices to | (None) |
This Internet-Draft is no longer active. A copy of the expired Internet-Draft is available in these formats:
Abstract
This document specifies requirements for an IPv6 Customer Edge (CE) router. Specifically, the current version of this document focuses on the basic provisioning of an IPv6 CE router and the provisioning of IPv6 hosts attached to it. The document also covers several transition technologies, as required in a world where IPv4 addresses are no longer available, so hosts in the customer LANs with IPv4-only or IPv6-only applications or devices, requiring to communicate with IPv4-only services at the Internet, are able to do so. The document obsoletes RFC 7084.
Authors
(Note: The e-mail addresses provided for the authors of this Internet-Draft may no longer be valid.)