Basic Requirements for IPv6 Customer Edge Routers with HNCP
draft-palet-v6ops-rfc7084-bis4-hncp-00
| Document | Type | Expired Internet-Draft (individual) | |
|---|---|---|---|
| Author | Jordi Palet Martinez | ||
| Last updated | 2017-12-13 (Latest revision 2017-06-11) | ||
| Stream | (None) | ||
| Intended RFC status | (None) | ||
| Formats |
Expired & archived
plain text
xml
htmlized
pdfized
bibtex
|
||
| Stream | Stream state | (No stream defined) | |
| Consensus boilerplate | Unknown | ||
| RFC Editor Note | (None) | ||
| IESG | IESG state | Expired | |
| Telechat date | (None) | ||
| Responsible AD | (None) | ||
| Send notices to | (None) |
This Internet-Draft is no longer active. A copy of
the expired Internet-Draft can be found at:
https://www.ietf.org/archive/id/draft-palet-v6ops-rfc7084-bis4-hncp-00.txt
https://www.ietf.org/archive/id/draft-palet-v6ops-rfc7084-bis4-hncp-00.txt
Abstract
This document specifies minimum requirements for an IPv6 Customer Edge (CE) router. Specifically, the current version of this document focuses on the basic provisioning of an IPv6 CE router and the provisioning of IPv6 hosts attached to it. Includes support of HNCP ([RFC7788]) for automated provisioning of downstream routers. The document obsoletes RFC 7084.
Authors
(Note: The e-mail addresses provided for the authors of this Internet-Draft may no longer be valid.)