Path Computation Element (PCE) Protocol Extensions for Stateful PCE usage for Point-to-Multipoint Traffic Engineering Label Switched Paths
draft-palle-pce-stateful-pce-p2mp-09

Document Type Replaced Internet-Draft (candidate for pce WG)
Last updated 2016-06-28 (latest revision 2016-06-09)
Replaces draft-palle-pce-stateful-pce-initiated-p2mp-lsp
Replaced by draft-ietf-pce-stateful-pce-p2mp
Stream IETF
Intended RFC status (None)
Formats
Expired & archived
plain text pdf html bibtex
Stream WG state Call For Adoption By WG Issued
Document shepherd No shepherd assigned
IESG IESG state Replaced by draft-ietf-pce-stateful-pce-p2mp
Consensus Boilerplate Unknown
Telechat date
Responsible AD (None)
Send notices to (None)

This Internet-Draft is no longer active. A copy of the expired Internet-Draft can be found at
https://www.ietf.org/archive/id/draft-palle-pce-stateful-pce-p2mp-09.txt

Abstract

The Path Computation Element (PCE) has been identified as an appropriate technology for the determination of the paths of point- to-multipoint (P2MP) TE LSPs. This document provides extensions required for Path Computation Element communication Protocol (PCEP) so as to enable the usage of a stateful PCE capability in supporting P2MP TE LSPs.

Authors

Udayasree Palle (udayasree.palle@huawei.com)
Dhruv Dhody (dhruv.ietf@gmail.com)
Yosuke Tanaka (yosuke.tanaka@ntt.com)
Zafar Ali (zali@cisco.com)
Vishnu Beeram (vbeeram@juniper.net)

(Note: The e-mail addresses provided for the authors of this Internet-Draft may no longer be valid.)