Skip to main content

Multicast VPN with Segment Routing Point-to-Multipoint Segment
draft-parekh-bess-mvpn-sr-p2mp-00

The information below is for an old version of the document.
Document Type
This is an older version of an Internet-Draft whose latest revision state is "Replaced".
Expired & archived
Authors Rishabh Parekh , Clarence Filsfils , Arvind Venkateswaran , Hooman Bidgoli , Daniel Voyer , Clayton Hassen
Last updated 2019-09-12 (Latest revision 2019-03-11)
Replaced by draft-parekh-bess-mvpn-evpn-sr-p2mp
RFC stream (None)
Formats
Stream Stream state (No stream defined)
Consensus boilerplate Unknown
RFC Editor Note (None)
IESG IESG state Expired
Telechat date (None)
Responsible AD (None)
Send notices to (None)

This Internet-Draft is no longer active. A copy of the expired Internet-Draft is available in these formats:

Abstract

A Point-to-Multipoint (P2MP) Segment in a Segment Routing domain efficiently carries traffic from a Root to a set of Leaves. This document describes extensions to BGP encodings and procedures for P2MP segments used in BGP/MPLS IP VPNs.

Authors

Rishabh Parekh
Clarence Filsfils
Arvind Venkateswaran
Hooman Bidgoli
Daniel Voyer
Clayton Hassen

(Note: The e-mail addresses provided for the authors of this Internet-Draft may no longer be valid.)