Transmission of IPv6 Packets over Bluetooth Low Energy
draft-patil-6lowpan-v6over-btle-01
Document | Type |
Replaced Internet-Draft
(individual)
Expired & archived
|
|
---|---|---|---|
Authors | Basavaraj Patil , Teemu Savolainen , Johanna Nieminen , Markus Isomaki | ||
Last updated | 2011-10-25 (Latest revision 2011-03-12) | ||
Replaced by | draft-ietf-6lowpan-btle | ||
RFC stream | (None) | ||
Intended RFC status | (None) | ||
Formats | |||
Stream | Stream state | (No stream defined) | |
Consensus boilerplate | Unknown | ||
RFC Editor Note | (None) | ||
IESG | IESG state | Replaced by draft-ietf-6lowpan-btle | |
Telechat date | (None) | ||
Responsible AD | (None) | ||
Send notices to | (None) |
This Internet-Draft is no longer active. A copy of the expired Internet-Draft is available in these formats:
Abstract
Bluetooth low energy is a low power air interface technology that is defined by the bluetooth SIG. The standard bluetooth radio has been widely implemented and available in mobile phones, notebook computers, audio headsets and many other devices. The low power version of bluetooth is a new specification and enables the use of this air interface with devices such as sensors, smart meters, applicances, etc. There is an added value in the ability to communicate with sensors over IPv6. This document describes how IPv6 is transported over bluetooth low energy using 6LoWPAN techniques.
Authors
Basavaraj Patil
Teemu Savolainen
Johanna Nieminen
Markus Isomaki
(Note: The e-mail addresses provided for the authors of this Internet-Draft may no longer be valid.)