PCP Usage for Quality of Service (QoS) in Mobile Networks
draft-penno-pcp-mobile-qos-00
| Document | Type | Expired Internet-Draft (individual) | |
|---|---|---|---|
| Last updated | 2014-01-30 (latest revision 2013-07-29) | ||
| Stream | (None) | ||
| Intended RFC status | (None) | ||
| Formats |
Expired & archived
pdf
htmlized
bibtex
|
||
| Stream | Stream state | (No stream defined) | |
| Consensus Boilerplate | Unknown | ||
| RFC Editor Note | (None) | ||
| IESG | IESG state | Expired | |
| Telechat date | |||
| Responsible AD | (None) | ||
| Send notices to | (None) | ||
https://www.ietf.org/archive/id/draft-penno-pcp-mobile-qos-00.txt
Abstract
There are challenges to request quality of service for an application or network flow that is not part of a mobile network's Evolved Packet Core (EPC). This document addresses this issue by defining a mechanism to signal the desired characteristics of a flow to the Mobile Network from a User Equipment (UE) using Port Control Protocol (PCP). The signaled characteristics allow the Mobile Network to enforce appropriate policies such as prioritize that flow accordingly and trigger dedicated bearer activation or bearer modification procedure.
Authors
Reinaldo Penno
(repenno@cisco.com)
Tirumaleswar Reddy.K
(tireddy@cisco.com)
Dan Wing
(dwing@cisco.com)
Bill Steeg
(billvs@cisco.com)
Mohamed Boucadair
(mohamed.boucadair@orange.com)
(Note: The e-mail addresses provided for the authors of this Internet-Draft may no longer be valid.)