%% You should probably cite draft-ietf-ipwave-ipv6-over-80211ocb instead of this I-D. @techreport{petrescu-ipv6-over-80211p-04, number = {draft-petrescu-ipv6-over-80211p-04}, type = {Internet-Draft}, institution = {Internet Engineering Task Force}, publisher = {Internet Engineering Task Force}, note = {Work in Progress}, url = {https://datatracker.ietf.org/doc/draft-petrescu-ipv6-over-80211p/04/}, author = {Alexandre Petrescu and Nabil Benamar and Tim Leinmueller}, title = {{Transmission of IPv6 Packets over IEEE 802.11 Networks Outside the Context of a Basic Service Set}}, pagetotal = 31, year = 2016, month = apr, day = 19, abstract = {In order to transmit IPv6 packets on IEEE 802.11 networks run outside the context of a basic service set (OCB, earlier "802.11p") there is a need to define a few parameters such as the recommended Maximum Transmission Unit size, the header format preceding the IPv6 header, the Type value within it, and others. This document describes these parameters for IPv6 and IEEE 802.11 OCB networks; it portrays the layering of IPv6 on 802.11 OCB similarly to other known 802.11 and Ethernet layers - by using an Ethernet Adaptation Layer. In addition, the document attempts to list what is different in 802.11 OCB (802.11p) compared to more 'traditional' 802.11a/b/g/n layers, layers over which IPv6 protocols run ok. Most notably, the operation outside the context of a BSS (OCB) has impact on IPv6 handover behaviour and on IPv6 security. An example of an IPv6 packet captured while transmitted over an IEEE 802.11 OCB link (802.11p) is given.}, }