Skip to main content

Multi-part TLVs in IS-IS
draft-pkaneria-lsr-multi-tlv-04

Document Type Replaced Internet-Draft (lsr WG)
Expired & archived
Authors Parag Kaneriya , Tony Li , Tony Przygienda , Shraddha Hegde , Chris Bowers , Les Ginsberg
Last updated 2023-12-09 (Latest revision 2023-10-06)
Replaced by draft-ietf-lsr-multi-tlv
RFC stream Internet Engineering Task Force (IETF)
Intended RFC status (None)
Formats
Additional resources Mailing list discussion
Stream WG state Adopted by a WG
Document shepherd Yingzhen Qu
IESG IESG state Replaced by draft-ietf-lsr-multi-tlv
Consensus boilerplate Unknown
Telechat date (None)
Responsible AD (None)
Send notices to yingzhen.ietf@gmail.com

This Internet-Draft is no longer active. A copy of the expired Internet-Draft is available in these formats:

Abstract

New technologies are adding new information into IS-IS while deployment scales are simultaneously increasing, causing the contents of many critical TLVs to exceed the currently supported limit of 255 octets. Extensions exist that require significant IS-IS changes that could help address the problem, but a less drastic solution would be beneficial. This document codifies the common mechanism of extending the TLV content space through multiple TLVs.

Authors

Parag Kaneriya
Tony Li
Tony Przygienda
Shraddha Hegde
Chris Bowers
Les Ginsberg

(Note: The e-mail addresses provided for the authors of this Internet-Draft may no longer be valid.)