RTP Payload Format for G.711.0
draft-ramalho-payload-g7110-03
| Document | Type |
Replaced Internet-Draft
(individual)
Expired & archived
|
|
|---|---|---|---|
| Authors | Michael A. Ramalho , Paul Jones , Noboru Harada , Muthu Arul Perumal , Miao Lei | ||
| Last updated | 2013-09-29 (Latest revision 2013-03-28) | ||
| Replaced by | RFC 7655 | ||
| RFC stream | (None) | ||
| Intended RFC status | (None) | ||
| Formats | |||
| Stream | Stream state | (No stream defined) | |
| Consensus boilerplate | Unknown | ||
| RFC Editor Note | (None) | ||
| IESG | IESG state | Replaced by draft-ietf-payload-g7110 | |
| Telechat date | (None) | ||
| Responsible AD | (None) | ||
| Send notices to | (None) |
This Internet-Draft is no longer active. A copy of the expired Internet-Draft is available in these formats:
Abstract
This document specifies the Real-Time Transport Protocol (RTP) payload format for ITU-T Recommendation G.711.0. ITU-T Rec. G.711.0 defines a lossless and stateless compression for G.711 packet payloads typically used in IP networks. This document also defines a storage mode format for G.711.0 and a media type registration for the G.711.0 RTP payload format.
Authors
Michael A. Ramalho
Paul Jones
Noboru Harada
Muthu Arul Perumal
Miao Lei
(Note: The e-mail addresses provided for the authors of this Internet-Draft may no longer be valid.)