LDP Typed Wildcard FEC for the PW FEC Elements
draft-raza-pwe3-pw-typed-wc-fec-01

Document Type Replaced Internet-Draft (individual)
Authors Carlos Pignataro  , Syed Raza  , Sami Boutros 
Last updated 2012-04-18 (latest revision 2011-06-02)
Replaced by RFC 6667, RFC 6667
Stream Internet Engineering Task Force (IETF)
Formats
Expired & archived
plain text pdf htmlized bibtex
Stream WG state Adopted by a WG
Document shepherd No shepherd assigned
IESG IESG state Replaced by draft-ietf-pwe3-pw-typed-wc-fec, draft-ietf-pwe3-pw-typed-wc-fec
Consensus Boilerplate Unknown
Telechat date
Responsible AD (None)
Send notices to (None)

This Internet-Draft is no longer active. A copy of the expired Internet-Draft can be found at
https://www.ietf.org/archive/id/draft-raza-pwe3-pw-typed-wc-fec-01.txt

Abstract

The "Typed Wildcard Forwarding Equivalence Class (FEC) Element" defines an extension to the Label Distribution Protocol (LDP) that can be used when it is desired to request or withdraw or release all label bindings for a given FEC Element type. However, a typed wildcard FEC element must be individually defined for each FEC element type. This specification defines the typed wildcard FEC elements for the PWid (0x80), Generalized PWid (0x81), and P2MP PW (0x82) FEC element types.

Authors

Carlos Pignataro (cpignata@cisco.com)
Syed Raza (skraza@cisco.com)
Sami Boutros (sboutros@cisco.com)

(Note: The e-mail addresses provided for the authors of this Internet-Draft may no longer be valid.)