Virtual Hub-and-Spoke in BGP/MPLS VPNs
draft-rekhter-l3vpn-virtual-hub-02
Document | Type |
Replaced Internet-Draft
(individual)
Expired & archived
|
|
---|---|---|---|
Authors | Huajin Jeng , Jim Uttaro , Luay Jalil , Bruno Decraene , Yakov Rekhter , Rahul Aggarwal | ||
Last updated | 2012-10-11 (Latest revision 2011-09-06) | ||
Replaced by | draft-ietf-l3vpn-virtual-hub | ||
RFC stream | (None) | ||
Intended RFC status | (None) | ||
Formats | |||
Stream | Stream state | (No stream defined) | |
Consensus boilerplate | Unknown | ||
RFC Editor Note | (None) | ||
IESG | IESG state | Replaced by draft-ietf-l3vpn-virtual-hub | |
Telechat date | (None) | ||
Responsible AD | (None) | ||
Send notices to | (None) |
This Internet-Draft is no longer active. A copy of the expired Internet-Draft is available in these formats:
Abstract
With BGP/MPLS VPNs any-to-any connectivity among sites of a given Virtual Private Network would require each Provider Edge router that has one or more of these sites connected to it to hold all the routes of that Virtual Private Network. The approach described in this document allows to reduce the number of Provider Edge routers that have to maintain all these routes by requiring only a subset of these routers to maintain all these routes. Specification of Requirements
Authors
Huajin Jeng
Jim Uttaro
Luay Jalil
Bruno Decraene
Yakov Rekhter
Rahul Aggarwal
(Note: The e-mail addresses provided for the authors of this Internet-Draft may no longer be valid.)