Grant Negotiation Access Protocol
draft-richer-transactional-authz-12
This document is an Internet-Draft (I-D).
Anyone may submit an I-D to the IETF.
This I-D is not endorsed by the IETF and has no formal standing in the
IETF standards process.
The information below is for an old version of the document.
Document | Type |
This is an older version of an Internet-Draft whose latest revision state is "Replaced".
|
|
---|---|---|---|
Author | Justin Richer | ||
Last updated | 2020-10-01 (Latest revision 2020-09-11) | ||
Replaced by | draft-ietf-gnap-core-protocol | ||
RFC stream | (None) | ||
Formats | |||
Stream | Stream state | (No stream defined) | |
Consensus boilerplate | Unknown | ||
RFC Editor Note | (None) | ||
IESG | IESG state | I-D Exists | |
Telechat date | (None) | ||
Responsible AD | (None) | ||
Send notices to | (None) |
draft-richer-transactional-authz-12
GNAP J. Richer, Ed. Internet-Draft Bespoke Engineering Intended status: Standards Track 1 October 2020 Expires: 4 April 2021 Grant Negotiation Access Protocol draft-richer-transactional-authz-12 Abstract This document defines a mechanism for delegating authorization to a piece of software, and conveying that delegation to the software. This delegation can include access to a set of APIs as well as information passed directly to the software. This document has been prepared by the GNAP working group design team of Kathleen Moriarty, Fabien Imbault, Dick Hardt, Mike Jones, and Justin Richer. This document is input into the GNAP working group and includes many notes on areas of discussion and decision that need to be made by the GNAP working group. Many of the features in this proposed protocol can be accomplished in a number of alternative ways, and where possible, the editor has included notes and discussion from the design team regarding the options as understood. The design team believes that this document represents a reasonable starting point for the working group and submits all content to the working group for consensus building. The key words "MUST", "MUST NOT", "REQUIRED", "SHALL", "SHALL NOT", "SHOULD", "SHOULD NOT", "RECOMMENDED", "NOT RECOMMENDED", "MAY", and "OPTIONAL" in this document are to be interpreted as described in BCP 14 [RFC2119] [RFC8174] when, and only when, they appear in all capitals, as shown here. Status of This Memo This Internet-Draft is submitted in full conformance with the provisions of BCP 78 and BCP 79. Internet-Drafts are working documents of the Internet Engineering Task Force (IETF). Note that other groups may also distribute working documents as Internet-Drafts. The list of current Internet- Drafts is at https://datatracker.ietf.org/drafts/current/. Internet-Drafts are draft documents valid for a maximum of six months and may be updated, replaced, or obsoleted by other documents at any time. It is inappropriate to use Internet-Drafts as reference material or to cite them other than as "work in progress." Richer Expires 4 April 2021 [Page 1] Internet-Draft Grant Negotiation Access Protocol October 2020 This Internet-Draft will expire on 4 April 2021. Copyright Notice Copyright (c) 2020 IETF Trust and the persons identified as the document authors. All rights reserved. This document is subject to BCP 78 and the IETF Trust's Legal Provisions Relating to IETF Documents (https://trustee.ietf.org/ license-info) in effect on the date of publication of this document. Please review these documents carefully, as they describe your rights and restrictions with respect to this document. Code Components extracted from this document must include Simplified BSD License text as described in Section 4.e of the Trust Legal Provisions and are provided without warranty as described in the Simplified BSD License. Table of Contents 1. Protocol . . . . . . . . . . . . . . . . . . . . . . . . . . 4 1.1. Roles . . . . . . . . . . . . . . . . . . . . . . . . . . 4 1.2. Elements . . . . . . . . . . . . . . . . . . . . . . . . 6 1.3. Sequences . . . . . . . . . . . . . . . . . . . . . . . . 7 1.3.1. Redirect-based Interaction . . . . . . . . . . . . . 10 1.3.2. User-code Interaction . . . . . . . . . . . . . . . . 12 1.3.3. Asynchronous Authorization . . . . . . . . . . . . . 14 1.3.4. Software-only Authorization . . . . . . . . . . . . . 15 1.3.5. Refreshing an Expired Access Token . . . . . . . . . 16 2. Requesting Access . . . . . . . . . . . . . . . . . . . . . . 17 2.1. Requesting Resources . . . . . . . . . . . . . . . . . . 19 2.1.1. Requesting a Single Access Token . . . . . . . . . . 19 2.1.2. Requesting Resources By Reference . . . . . . . . . . 21 2.1.3. Requesting Multiple Access Tokens . . . . . . . . . . 23 2.1.4. Signaling Token Behavior . . . . . . . . . . . . . . 25 2.2. Requesting User Information . . . . . . . . . . . . . . . 27 2.3. Identifying the RC . . . . . . . . . . . . . . . . . . . 28 2.3.1. Identifying the RC Instance . . . . . . . . . . . . . 29 2.3.2. Identifying the RC Key . . . . . . . . . . . . . . . 31 2.3.3. Providing Displayable RC Information . . . . . . . . 32 2.3.4. Authenticating the RC . . . . . . . . . . . . . . . . 32 2.4. Identifying the User . . . . . . . . . . . . . . . . . . 33 2.4.1. Identifying the User by Reference . . . . . . . . . . 34 2.5. Interacting with the User . . . . . . . . . . . . . . . . 34 2.5.1. Redirect to an Arbitrary URL . . . . . . . . . . . . 36 2.5.2. Open an Application-specific URL . . . . . . . . . . 37 2.5.3. Receive a Callback After Interaction . . . . . . . . 37 2.5.4. Display a Short User Code . . . . . . . . . . . . . . 39 2.5.5. Indicate Desired Interaction Locales . . . . . . . . 40 2.5.6. Extending Interaction Capabilities . . . . . . . . . 40 Richer Expires 4 April 2021 [Page 2] Internet-Draft Grant Negotiation Access Protocol October 2020 2.6. Declaring RC Capabilities . . . . . . . . . . . . . . . . 40 2.7. Referencing an Existing Grant Request . . . . . . . . . . 40 2.8. Requesting OpenID Connect Claims . . . . . . . . . . . . 41 2.9. Extending The Grant Request . . . . . . . . . . . . . . . 42 3. Grant Response . . . . . . . . . . . . . . . . . . . . . . . 42 3.1. Request Continuation . . . . . . . . . . . . . . . . . . 43 3.2. Access Tokens . . . . . . . . . . . . . . . . . . . . . . 44 3.2.1. Single Access Token . . . . . . . . . . . . . . . . . 44 3.2.2. Multiple Access Tokens . . . . . . . . . . . . . . . 47 3.3. Interaction Capabilities . . . . . . . . . . . . . . . . 48 3.3.1. Redirection to an arbitrary URL . . . . . . . . . . . 48 3.3.2. Launch of an application URL . . . . . . . . . . . . 48 3.3.3. Callback to URL . . . . . . . . . . . . . . . . . . . 49 3.3.4. Display of a Short User Code . . . . . . . . . . . . 49 3.3.5. Extending Interaction Capability Responses . . . . . 51 3.4. Returning User Information . . . . . . . . . . . . . . . 51 3.5. Returning Dynamically-bound Reference Handles . . . . . . 51 3.6. Error response . . . . . . . . . . . . . . . . . . . . . 53 3.7. Extending the Response . . . . . . . . . . . . . . . . . 54 4. Interaction at the AS . . . . . . . . . . . . . . . . . . . . 54 4.1. Interaction at a Redirected URI . . . . . . . . . . . . . 55 4.2. Interaction at the User Code URI . . . . . . . . . . . . 55 4.3. Interaction through an Application URI . . . . . . . . . 56 4.4. Post-Interaction Completion . . . . . . . . . . . . . . . 56 4.4.1. Completing Interaction with a Browser Redirect to the Callback URI . . . . . . . . . . . . . . . . . . . . 57 4.4.2. Completing Interaction with a Direct HTTP Request Callback . . . . . . . . . . . . . . . . . . . . . . 57 4.4.3. Calculating the interaction hash . . . . . . . . . . 58 5. Continuing a Grant Request . . . . . . . . . . . . . . . . . 59 5.1. Continuing after a Finalized Interaction . . . . . . . . 60 5.2. Continuing after Tokens are Issued . . . . . . . . . . . 61 6. Token Management . . . . . . . . . . . . . . . . . . . . . . 61 6.1. Rotating the Access Token . . . . . . . . . . . . . . . . 62 6.2. Revoking the Access Token . . . . . . . . . . . . . . . . 63 7. Using Access Tokens . . . . . . . . . . . . . . . . . . . . . 64 8. Binding Keys . . . . . . . . . . . . . . . . . . . . . . . . 65 8.1. Detached JWS . . . . . . . . . . . . . . . . . . . . . . 66 8.2. Attached JWS . . . . . . . . . . . . . . . . . . . . . . 68 8.3. Mutual TLS . . . . . . . . . . . . . . . . . . . . . . . 70 8.4. DPoP . . . . . . . . . . . . . . . . . . . . . . . . . . 71 8.5. HTTP Signing . . . . . . . . . . . . . . . . . . . . . . 73 8.6. OAuth PoP . . . . . . . . . . . . . . . . . . . . . . . . 74 9. Discovery . . . . . . . . . . . . . . . . . . . . . . . . . . 76 10. Resource Servers . . . . . . . . . . . . . . . . . . . . . . 77 10.1. Introspecting a Token . . . . . . . . . . . . . . . . . 77 10.2. Deriving a downstream token . . . . . . . . . . . . . . 79 10.3. Registering a Resource Handle . . . . . . . . . . . . . 81 Richer Expires 4 April 2021 [Page 3] Internet-Draft Grant Negotiation Access Protocol October 2020 10.4. Requesting a Resources With Insufficient Access . . . . 82 11. Acknowledgements . . . . . . . . . . . . . . . . . . . . . . 82 12. IANA Considerations . . . . . . . . . . . . . . . . . . . . . 83 13. Security Considerations . . . . . . . . . . . . . . . . . . . 83 14. Privacy Considerations . . . . . . . . . . . . . . . . . . . 83 15. Normative References . . . . . . . . . . . . . . . . . . . . 83 Appendix A. Document History . . . . . . . . . . . . . . . . . . 85 Appendix B. Component Data Models . . . . . . . . . . . . . . . 88 Appendix C. Example Protocol Flows . . . . . . . . . . . . . . . 89 C.1. Redirect-Based User Interaction . . . . . . . . . . . . . 89 C.2. Secondary Device Interaction . . . . . . . . . . . . . . 93 Appendix D. No User Involvement . . . . . . . . . . . . . . . . 96 D.1. Asynchronous Authorization . . . . . . . . . . . . . . . 97 D.2. Applying OAuth 2 Scopes and Client IDs . . . . . . . . . 100 Appendix E. JSON Structures and Polymorphism . . . . . . . . . . 101 Author's Address . . . . . . . . . . . . . . . . . . . . . . . . 102 1. Protocol This protocol allows a piece of software, the resource client, to request delegated authorization to resource servers and direct information. This delegation is facilitated by an authorization server usually on behalf of a resource owner. The requesting party operating the software may interact with the authorization server to authenticate, provide consent, and authorize the request. The process by which the delegation happens is known as a grant, and the GNAP protocol allows for the negotiation of the grant process over time by multiple parties. This protocol solves many of the same use cases as OAuth 2.0 [RFC6749], OpenID Connect [OIDC], and the family of protocols that have grown up around that ecosystem. However, GNAP is not an extension of OAuth 2.0 and is not intended to be directly compatible with OAuth 2.0. GNAP seeks to provide functionality and solve use cases that OAuth 2.0 cannot easily or cleanly address. Even so, GNAP and OAuth 2.0 will exist in parallel for many deployments, and considerations have been taken to facilitate the mapping and transition from legacy systems to GNAP. Some examples of these can be found in Appendix D.2. 1.1. Roles The parties in the GNAP protocol perform actions under different roles. Roles are defined by the actions taken and the expectations leveraged on the role by the overall protocol. Authorization Server (AS) Manages the requested delegations for the Richer Expires 4 April 2021 [Page 4] Internet-Draft Grant Negotiation Access Protocol October 2020 RO. The AS issues tokens and directly delegated information to the RC. The AS is defined by its grant endpoint, a single URL that accepts a POST request with a JSON payload. The AS could also have other endpoints, including interaction endpoints and user code endpoints, and these are introduced to the RC as needed during the delegation process. Resource Client (RC, aka "client") Requests tokens from the AS and uses tokens at the RS. An instance of the RC software is identified by its key, which can be known to the AS prior to the first request. The AS determines which policies apply to a given RC, including what it can request and on whose behalf. Resource Server (RS, aka "API") Accepts tokens from the RC issued by the AS and serves delegated resources on behalf of the RO. There could be multiple RSs protected by the AS that the RC will call. Resource Owner (RO) Authorizes the request from the RC to the RS, often interactively at the AS. Requesting Party (RQ, aka "user") Operates and interacts with the RC. The GNAP protocol design does not assume any one deployment architecture, but instead attempts to define roles that can be fulfilled in a number of different ways for different use cases. As long as a given role fulfills all of its obligations and behaviors as defined by the protocol, GNAP does not make additional requirements on its structure or setup. Multiple roles can be fulfilled by the same party, and a given party can switch roles in different instances of the protocol. For example, the RO and RQ in many instances are the same person, where a user is authorizing the RC to act on their own behalf at the RS. In this case, one party fulfills both of the RO and RQ roles, but the roles themselves are still defined separately from each other to allow for other use cases where they are fulfilled by different parties. For another example, in some complex scenarios, an RS receiving requests from one RC can act as an RC for a downstream secondary RS in order to fulfill the original request. In this case, one piece of software is both an RS and an RC from different perspectives, and it fulfills these roles separately as far as the overall protocol is concerned. Richer Expires 4 April 2021 [Page 5] Internet-Draft Grant Negotiation Access Protocol October 2020 A single role need not be deployed as a monolithic service. For example, An RC could have components that are installed on the RQ's device as well as a back-end system that it communicates with. If both of these components participate in the delegation protocol, they are both considered part of the RC. For another example, an AS could likewise be built out of many constituent components in a distributed architecture. The component that the RC calls directly could be different from the component that the the RO interacts with to drive consent, since API calls and user interaction have different security considerations in many environments. Furthermore, the AS could need to collect identity claims about the RO from one system that deals with user attributes while generating access tokens at another system that deals with security rights. From the perspective of GNAP, all of these are pieces of the AS and together fulfill the role of the AS as defined by the protocol. [[ Editor's note: The names for the roles are an area of ongoing discussion within the working group, as is the appropriate precision of what activities and expectations a particular role covers. In particular, the AS might be formally decomposed into delegation components, that the client talks to, and interaction components, that the user talks to. ]] 1.2. Elements In addition to the roles above, the protocol also involves several elements that are acted upon by the roles throughout the process. Access Token A credential representing a set of access rights delegated to the RC. The access token is created by the AS, consumed and verified by the RS, and issued to and carried by the RC. The contents and format of the access token are opaque to the RC. Key A cryptographic element binding a request to the holder of the key. Access tokens and RC's can be associated with specific keys. Subject Information Information that is returned directly to the RC from the AS without the RC making a separate call to an RS. [[ Editor's note: What other core elements need an introduction here? These aren't roles to be taken on by different parties, nor are they descriptions of the possible configurations of parties, but these are still important moving parts within the protocol. ]] Richer Expires 4 April 2021 [Page 6] Internet-Draft Grant Negotiation Access Protocol October 2020 1.3. Sequences The GNAP protocol can be used in a variety of ways to allow the core delegation process to take place. Many portions of this process are conditionally present depending on the context of the deployments, and not every step in this overview will happen in all circumstances. Note that a connection between roles in this process does not necessarily indicate that a specific protocol message is sent across the wire between the components fulfilling the roles in question, or that a particular step is required every time. In some circumstances, the information needed at a given stage is communicated out-of-band or is pre-configured between the components or entities performing the roles. For example, one entity can fulfil multiple roles, and so explicit communication between the roles is not necessary within the protocol flow. Richer Expires 4 April 2021 [Page 7] Internet-Draft Grant Negotiation Access Protocol October 2020 +------------+ +------------+ | Requesting | ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ | Resource | | Party (RQ) | | Owner (RO) | +------------+ +------------+ + + + + (A) (B) + + + + +--------+ + +------------+ |Resource|--------------(1)-------+----->| Resource | | Client | + | Server | | (RC) | +---------------+ | (RS) | | |--(2)->| Authorization | | | | |<-(3)--| Server | | | | | | (AS) | | | | |--(4)->| | | | | |<-(5)--| | | | | |--------------(6)------------->| | | | | |<-(7)--| | | |<-------------(8)------------->| | | |--(9)->| | | | | |<-(10)-| | | | | |--------------(11)------------>| | | | | |<~(12)~| | | |-(13)->| | | | | | | | | | +--------+ +---------------+ +------------+ Legend + + + indicates a possible interaction with a human ----- indicates an interaction between protocol roles ~ ~ ~ indicates a potential equivalence or communication between roles * (A) The RQ interacts with the RC to indicate a need for resources on behalf of the RO. This could identify the RS the RC needs to call, the resources needed, or the RO that is needed to approve the request. Note that the RO and RQ are often the same entity in practice. * (1) The RC attempts to call the RS (Section 10.4) to determine what access is needed. The RS informs the RC that access can be granted through the AS. * (2) The RC requests access at the AS (Section 2). Richer Expires 4 April 2021 [Page 8] Internet-Draft Grant Negotiation Access Protocol October 2020 * (3) The AS processes the request and determines what is needed to fulfill the request. The AS sends its response to the RC (Section 3). * (B) If interaction is required, the AS interacts with the RO (Section 4) to gather authorization. The interactive component of the AS can function using a variety of possible mechanisms including web page redirects, applications, challenge/response protocols, or other methods. The RO approves the request for the RC being operated by the RQ. Note that the RO and RQ are often the same entity in practice. * (4) The RC continues the grant at the AS (Section 5). * (5) If the AS determines that access can be granted, it returns a response to the RC (Section 3) including an access token (Section 3.2) for calling the RS and any directly returned information (Section 3.4) about the RO. * (6) The RC uses the access token (Section 7) to call the RS. * (7) The RS determines if the token is sufficient for the request by examining the token, potentially calling the AS (Section 10.1). * (8) The RC to call the RS (Section 7) using the access token until the RS or RC determine that the token is no longer valid. * (9) When the token no longer works, the RC fetches an updated access token (Section 6.1) based on the rights granted in (5). * (10) The AS issues a new access token (Section 3.2) to the RC. * (11) The RC uses the new access token (Section 7) to call the RS. * (12) The RS determines if the new token is sufficient for the request by examining the token, potentially calling the AS (Section 10.1). * (13) The RC disposes of the token (Section 6.2) once the RC has completed its access of the RS. The following sections and Appendix C contain specific guidance on how to use the GNAP protocol in different situations and deployments. Richer Expires 4 April 2021 [Page 9] Internet-Draft Grant Negotiation Access Protocol October 2020 1.3.1. Redirect-based Interaction In this example flow, the RC is a web application that wants access to resources on behalf of the current user, who acts as both the requesting party (RQ) and the resource owner (RO). Since the RC is capable of directing the user to an arbitrary URL and receiving responses from the user's browser, interaction here is handled through front-channel redirects using the user's browser. The RC uses a persistent session with the user to ensure the same user that is starting the interaction is the user that returns from the interaction. +--------+ +--------+ +------+ | RC | | AS | | RO | | | | | | + | | |< (1) + Start Session + + + + + + + + + + + + + + + +| RQ | | | | | |(User)| | |--(2)--- Request Access --------->| | | | | | | | | | | |<-(3)-- Interaction Needed -------| | | | | | | | | | | |+ (4) + Redirect for Interaction + + + + + + + + + > | | | | | | | | | | | |<+ (5) +>| | | | | | AuthN | | | | | | | | | | | |<+ (6) +>| | | | | | AuthZ | | | | | | | | | |< (7) + Redirect for Continuation + + + + + + + + + +| | | | | | +------+ | |--(8)--- Continue Request ------->| | | | | | | |<-(9)----- Grant Access ----------| | | | | | +--------+ +--------+ 1. The RC establishes a verifiable session to the user, in the role of the RQ. 2. The RC requests access to the resource (Section 2). The RC indicates that it can redirect to an arbitrary URL (Section 2.5.1) and receive a callback from the browser (Section 2.5.3). The RC stores verification information for its callback in the session created in (1). Richer Expires 4 April 2021 [Page 10] Internet-Draft Grant Negotiation Access Protocol October 2020 3. The AS determines that interaction is needed and responds (Section 3) with a URL to send the user to (Section 3.3.1) and information needed to verify the callback (Section 3.3.3) in (7). The AS also includes information the RC will need to continue the request (Section 3.1) in (8). The AS associates this continuation information with an ongoing request that will be referenced in (4), (6), and (8). 4. The RC stores the verification and continuation information from (3) in the session from (1). The RC then redirects the user to the URL (Section 4.1) given by the AS in (3). The user's browser loads the interaction redirect URL. The AS loads the pending request based on the incoming URL generated in (3). 5. The user authenticates at the AS, taking on the role of the RO. 6. As the RO, the user authorizes the pending request from the RC. 7. When the AS is done interacting with the user, the AS redirects the user back (Section 4.4.1) to the RC using the callback URL provided in (2). The callback URL is augmented with an interaction reference that the AS associates with the ongoing request created in (2) and referenced in (4). The callback URL is also augmented with a hash of the security information provided in (2) and (3). The RC loads the verification information from (2) and (3) from the session created in (1). The RC calculates a hash (Section 4.4.3) based on this information and continues only if the hash validates. Note that the RC needs to ensure that the parameters for the incoming request match those that it is expecting from the session created in (1). The RC also needs to be prepared for the RQ never being returned to the RC and handle time outs appropriately. 8. The RC loads the continuation information from (3) and sends the interaction reference from (7) in a request to continue the request (Section 5.1). The AS validates the interaction reference ensuring that the reference is associated with the request being continued. 9. If the request has been authorized, the AS grants access to the information in the form of access tokens (Section 3.2) and direct subject information (Section 3.4) to the RC. An example set of protocol messages for this method can be found in Appendix C.1. Richer Expires 4 April 2021 [Page 11] Internet-Draft Grant Negotiation Access Protocol October 2020 1.3.2. User-code Interaction In this example flow, the RC is a device that is capable of presenting a short, human-readable code to the user and directing the user to enter that code at a known URL. The RC is not capable of presenting an arbitrary URL to the user, nor is it capable of accepting incoming HTTP requests from the user's browser. The RC polls the AS while it is waiting for the RO to authorize the request. The user's interaction is assumed to occur on a secondary device. In this example it is assumed that the user is both the RQ and RO, though the user is not assumed to be interacting with the RC through the same web browser used for interaction at the AS. +--------+ +--------+ +------+ | RC | | AS | | RO | | |--(1)--- Request Access --------->| | | + | | | | | | RQ | | |<-(2)-- Interaction Needed -------| | |(User)| | | | | | | | |+ (3) + + Display User Code + + + + + + + + + + + + >| | | | | | | | | | | |<+ (4) +>| | | | | | Code | | | |--(8)--- Continue Request (A) --->| | | | | | | |<+ (5) +>| | | |<-(9)-- Not Yet Granted (Wait) ---| | AuthN | | | | | | | | | | | |<+ (6) +>| | | | | | AuthZ | | | | | | | | | | | |<+ (7) +>| | | | | |Completed| | | | | | | | | |--(10)-- Continue Request (B) --->| | +------+ | | | | | |<-(11)----- Grant Access ---------| | | | | | +--------+ +--------+ 1. The RC requests access to the resource (Section 2). The RC indicates that it can display a user code (Section 2.5.4). 2. The AS determines that interaction is needed and responds (Section 3) with a user code to communicate to the user (Section 3.3.4). This could optionally include a URL to direct the user to, but this URL should be static and so could be configured in the RC's documentation. The AS also includes information the RC will need to continue the request Richer Expires 4 April 2021 [Page 12] Internet-Draft Grant Negotiation Access Protocol October 2020 (Section 3.1) in (8) and (10). The AS associates this continuation information with an ongoing request that will be referenced in (4), (6), (8), and (10). 3. The RC stores the continuation information from (2) for use in (8) and (10). The RC then communicates the code to the user (Section 4.1) given by the AS in (2). 4. The user's directs their browser to the user code URL. This URL is stable and can be communicated via the RC's documentation, the AS documentation, or the RC software itself. Since it is assumed that the RO will interact with the AS through a secondary device, the RC does not provide a mechanism to launch the RO's browser at this URL. The user enters the code communicated in (3) to the AS. The AS validates this code against a current request in process. 5. The user authenticates at the AS, taking on the role of the RO. 6. As the RO, the user authorizes the pending request from the RC. 7. When the AS is done interacting with the user, the AS indicates to the RO that the request has been completed. 8. Meanwhile, the RC loads the continuation information stored at (3) and continues the request (Section 5). The AS determines which ongoing access request is referenced here and checks its state. 9. If the access request has not yet been authorized by the RO in (6), the AS responds to the RC to continue the request (Section 3.1) at a future time through additional polling. This response can include refreshed credentials as well as information regarding how long the RC should wait before calling again. The RC replaces its stored continuation information from the previous response (2). Note that the AS may need to determine that the RO has not approved the request in a sufficient amount of time and return an appropriate error to the RC. 10. The RC continues to poll the AS (Section 5) with the new continuation information in (9). 11. If the request has been authorized, the AS grants access to the information in the form of access tokens (Section 3.2) and direct subject information (Section 3.4) to the RC. Richer Expires 4 April 2021 [Page 13] Internet-Draft Grant Negotiation Access Protocol October 2020 An example set of protocol messages for this method can be found in Appendix C.2. 1.3.3. Asynchronous Authorization In this example flow, the RQ and RO roles are fulfilled by different parties, and the RO does not interact with the RC. The AS reaches out asynchronously to the RO during the request process to gather the RO's authorization for the RC's request. The RC polls the AS while it is waiting for the RO to authorize the request. +--------+ +--------+ +------+ | RC | | AS | | RO | | |--(1)--- Request Access --------->| | | | | | | | | | | |<-(2)-- Not Yet Granted (Wait) ---| | | | | | | |<+ (3) +>| | | | | | AuthN | | | |--(6)--- Continue Request (A) --->| | | | | | | |<+ (4) +>| | | |<-(7)-- Not Yet Granted (Wait) ---| | AuthZ | | | | | | | | | | | |<+ (5) +>| | | | | |Completed| | | | | | | | | |--(8)--- Continue Request (B) --->| | +------+ | | | | | |<-(9)------ Grant Access ---------| | | | | | +--------+ +--------+ 1. The RC requests access to the resource (Section 2). The RC does not send any interactions capabilities to the server, indicating that it does not expect to interact with the RO. The RC can also signal which RO it requires authorization from, if known, by using the user request section (Section 2.4). 2. The AS determines that interaction is needed, but the RC cannot interact with the RO. The AS responds (Section 3) with the information the RC will need to continue the request (Section 3.1) in (6) and (8), including a signal that the RC should wait before checking the status of the request again. The AS associates this continuation information with an ongoing request that will be referenced in (3), (4), (5), (6), and (8). Richer Expires 4 April 2021 [Page 14] Internet-Draft Grant Negotiation Access Protocol October 2020 3. The AS determines which RO to contact based on the request in (1), through a combination of the user request (Section 2.4), the resources request (Section 2.1), and other policy information. The AS contacts the RO and authenticates them. 4. The RO authorizes the pending request from the RC. 5. When the AS is done interacting with the RO, the AS indicates to the RO that the request has been completed. 6. Meanwhile, the RC loads the continuation information stored at (3) and continues the request (Section 5). The AS determines which ongoing access request is referenced here and checks its state. 7. If the access request has not yet been authorized by the RO in (6), the AS responds to the RC to continue the request (Section 3.1) at a future time through additional polling. This response can include refreshed credentials as well as information regarding how long the RC should wait before calling again. The RC replaces its stored continuation information from the previous response (2). Note that the AS may need to determine that the RO has not approved the request in a sufficient amount of time and return an appropriate error to the RC. 8. The RC continues to poll the AS (Section 5) with the new continuation information from (7). 9. If the request has been authorized, the AS grants access to the information in the form of access tokens (Section 3.2) and direct subject information (Section 3.4) to the RC. An example set of protocol messages for this method can be found in Appendix D.1. 1.3.4. Software-only Authorization In this example flow, the AS policy allows the RC to make a call on its own behalf, without the need for a RO to be involved at runtime to approve the decision. Since there is no explicit RO, the RC does not interact with an RO. Richer Expires 4 April 2021 [Page 15] Internet-Draft Grant Negotiation Access Protocol October 2020 +--------+ +--------+ | RC | | AS | | |--(1)--- Request Access --------->| | | | | | | |<-(2)---- Grant Access -----------| | | | | | +--------+ +--------+ 1. The RC requests access to the resource (Section 2). The RC does not send any interactions capabilities to the server. 2. The AS determines that the request is been authorized, the AS grants access to the information in the form of access tokens (Section 3.2) and direct subject information (Section 3.4) to the RC. An example set of protocol messages for this method can be found in Appendix D. 1.3.5. Refreshing an Expired Access Token In this example flow, the RC receives an access token to access a resource server through some valid GNAP process. The RC uses that token at the RS for some time, but eventually the access token expires. The RC then gets a new access token by rotating the expired access token at the AS using the token's management URL. +--------+ +--------+ | RC | | AS | | |--(1)--- Request Access ----------------->| | | | | | | |<-(2)--- Grant Access --------------------| | | | | | | | +--------+ | | | |--(3)--- Access Resource --->| RS | | | | | | | | | | |<-(4)--- Error Response -----| | | | | | +--------+ | | | | | | | |--(5)--- Rotate Token ------------------->| | | | | | | |<-(6)--- Rotated Token -------------------| | | | | | +--------+ +--------+ 1. The RC requests access to the resource (Section 2). Richer Expires 4 April 2021 [Page 16] Internet-Draft Grant Negotiation Access Protocol October 2020 2. The AS grants access to the resource (Section 3) with an access token (Section 3.2) usable at the RS. The access token response includes a token management URI. 3. The RC presents the token (Section 7) to the RS. The RS validates the token and returns an appropriate response for the API. 4. When the access token is expired, the RS responds to the RC with an error. 5. The RC calls the token management URI returned in (2) to rotate the access token (Section 6.1). The RC presents the access token as well as the appropriate key. 6. The AS validates the rotation request including the signature and keys presented in (5) and returns a new access token (Section 3.2.1). The response includes a new access token and can also include updated token management information, which the RC will store in place of the values returned in (2). 2. Requesting Access To start a request, the RC sends JSON [RFC8259] document with an object as its root. Each member of the request object represents a different aspect of the RC's request. Each field is described in detail in a section below. resources Describes the rights that the RC is requesting for one or more access tokens to be used at RS's. Section 2.1 subject Describes the information about the RO that the RC is requesting to be returned directly in the response from the AS. Section 2.2 client Describes the RC that is making this request, including the key that the RC will use to protect this request and any continuation requests at the AS and any user-facing information about the RC used in interactions at the AS. Section 2.3 user Identifies the RQ to the AS in a manner that the AS can verify, either directly or by interacting with the RQ to determine their status as the RO. Section 2.4 interact Describes the capabilities that the RC has for allowing the RO to interact with the AS. Section 2.5 capabilities Identifies named extension capabilities that the RC can Richer Expires 4 April 2021 [Page 17] Internet-Draft Grant Negotiation Access Protocol October 2020 use, signaling to the AS which extensions it can use. Section 2.6 existing_grant Identifies a previously-existing grant that the RC is extending with this request. Section 2.7 claims Identifies the identity claims to be returned as part of an OpenID Connect claims request. Section 2.8 Additional members of this request object can be defined by extensions to this protocol as described in Section 2.9 A non-normative example of a grant request is below: { "resources": [ { "type": "photo-api", "actions": [ "read", "write", "dolphin" ], "locations": [ "https://server.example.net/", "https://resource.local/other" ], "datatypes": [ "metadata", "images" ] }, "dolphin-metadata" ], "client": { "display": { "name": "My Client Display Name", "uri": "https://example.net/client" }, "key": { "proof": "jwsd", "jwk": { "kty": "RSA", "e": "AQAB", "kid": "xyz-1", "alg": "RS256", "n": "kOB5rR4Jv0GMeL...." } } Richer Expires 4 April 2021 [Page 18] Internet-Draft Grant Negotiation Access Protocol October 2020 }, "interact": { "redirect": true, "callback": { "method": "redirect", "uri": "https://client.example.net/return/123455", "nonce": "LKLTI25DK82FX4T4QFZC" } }, "capabilities": ["ext1", "ext2"], "subject": { "sub_ids": ["iss-sub", "email"], "assertions": ["id_token"] } } The request MUST be sent as a JSON object in the body of the HTTP POST request with Content-Type "application/json", unless otherwise specified by the signature mechanism. 2.1. Requesting Resources If the RC is requesting one or more access tokens for the purpose of accessing an API, the RC MUST include a "resources" element. This element MUST be an array (for a single access token (Section 2.1.1)) or an object (for multiple access tokens (Section 2.1.3)), as described in the following sections. 2.1.1. Requesting a Single Access Token When requesting an access token, the RC MUST send a "resources" element containing a JSON array. The elements of the JSON array represent rights of access that the RC is requesting in the access token. The requested access is the sum of all elements within the array. The RC declares what access it wants to associated with the resulting access token using objects that describe multiple dimensions of access. Each object contains a "type" property that determines the type of API that the RC is calling. type The type of resource request as a string. This field MAY define which other elements are allowed in the request. This element is REQUIRED. The value of this field is under the control of the AS. This field MUST be compared using an exact byte match of the string value against known types by the AS. The AS MUST ensure that there is no Richer Expires 4 April 2021 [Page 19] Internet-Draft Grant Negotiation Access Protocol October 2020 collision between different authorization data types that it supports. The AS MUST NOT do any collation or normalization of data types during comparison. It is RECOMMENDED that designers of general-purpose APIs use a URI for this field to avoid collisions between multiple API types protected by a single AS. While it is expected that many APIs will have its own properties, a set of common properties are defined here. Specific API implementations SHOULD NOT re-use these fields with different semantics or syntax. The available values for these properties are determined by the API being protected at the RS. [[ Editor's note: this will align with OAuth 2 RAR, but the details of how it aligns are TBD ]]. actions The types of actions the RC will take at the RS as an array of strings. For example, an RC asking for a combination of "read" and "write" access. locations The location of the RS as an array of strings. These strings are typically URIs identifying the location of the RS. datatypes The kinds of data available to the RC at the RS's API as an array of strings. For example, an RC asking for access to raw "image" data and "metadata" at a photograph API. identifier A string identifier indicating a specific resource at the RS. For example, a patient identifier for a medical API or a bank account number for a financial API. The following non-normative example shows the use of both common and API-specific elements as part of two different access "type" values. Richer Expires 4 April 2021 [Page 20] Internet-Draft Grant Negotiation Access Protocol October 2020 "resources": [ { "type": "photo-api", "actions": [ "read", "write", "dolphin" ], "locations": [ "https://server.example.net/", "https://resource.local/other" ], "datatypes": [ "metadata", "images" ] }, { "type": "financial-transaction", "actions": [ "withdraw" ], "identifier": "account-14-32-32-3", "currency": "USD" } ] If this request is approved, the resulting access token (Section 3.2.1) will include the sum of both of the requested types of access. 2.1.2. Requesting Resources By Reference Instead of sending an object describing the requested resource (Section 2.1.1), a RC MAY send a string known to the AS or RS representing the access being requested. Each string SHOULD correspond to a specific expanded object representation at the AS. [[ Editor's note: we could describe more about how the expansion would work. For example, expand into an object where the value of the "type" field is the value of the string. Or we could leave it open and flexible, since it's really up to the AS/RS to interpret. ]] "resources": [ "read", "dolphin-metadata", "some other thing" ] Richer Expires 4 April 2021 [Page 21] Internet-Draft Grant Negotiation Access Protocol October 2020 This value is opaque to the RC and MAY be any valid JSON string, and therefore could include spaces, unicode characters, and properly escaped string sequences. However, in some situations the value is intended to be seen and understood be the RC developer. In such cases, the API designer choosing any such human-readable strings SHOULD take steps to ensure the string values are not easily confused by a developer This functionality is similar in practice to OAuth 2's "scope" parameter [RFC6749], where a single string represents the set of access rights requested by the RC. As such, the reference string could contain any valid OAuth 2 scope value as in Appendix D.2. Note that the reference string here is not bound to the same character restrictions as in OAuth 2's "scope" definition. A single "resources" array MAY include both object-type and string- type resource items. "resources": [ { "type": "photo-api", "actions": [ "read", "write", "dolphin" ], "locations": [ "https://server.example.net/", "https://resource.local/other" ], "datatypes": [ "metadata", "images" ] }, "read", "dolphin-metadata", { "type": "financial-transaction", "actions": [ "withdraw" ], "identifier": "account-14-32-32-3", "currency": "USD" }, "some other thing" ] Richer Expires 4 April 2021 [Page 22] Internet-Draft Grant Negotiation Access Protocol October 2020 [[ Editor's note: passing resource requests by reference really is akin to a "scope", and we have many years of experience showing us that the simplicity of giving a developer a set of strings to send is a simple and powerful pattern. We could always require objects and just use the "type" field as a scope value, but that's a lot of complexity to pay for the simple case. Client developers will always know which kind they need to send, because they're the ones picking from the API's description. ]] 2.1.3. Requesting Multiple Access Tokens When requesting multiple access tokens, the resources element is a JSON object. The names of the JSON object elements are token identifiers chosen by the RC, and MAY be any valid string. The values of the JSON object are JSON arrays representing a single access token request, as specified in requesting a single access token (Section 2.1.1). The following non-normative example shows a request for two separate access tokens, "token1" and "token2". Richer Expires 4 April 2021 [Page 23] Internet-Draft Grant Negotiation Access Protocol October 2020 "resources": { "token1": [ { "type": "photo-api", "actions": [ "read", "write", "dolphin" ], "locations": [ "https://server.example.net/", "https://resource.local/other" ], "datatypes": [ "metadata", "images" ] }, "dolphin-metadata" ], "token2": [ { "type": "walrus-access", "actions": [ "foo", "bar" ], "locations": [ "https://resource.other/" ], "datatypes": [ "data", "pictures", "walrus whiskers" ] } ] } Any approved access requests are returned in the multiple access token response (Section 3.2.2) structure using the token identifiers in the request. Richer Expires 4 April 2021 [Page 24] Internet-Draft Grant Negotiation Access Protocol October 2020 2.1.4. Signaling Token Behavior While the AS is ultimately in control of how tokens are returned and bound to the RC, sometimes the RC has context about what it can support that can affect the AS's response. This specification defines several flags that are passed as resource reference strings (Section 2.1.2). Each flag applies only to the single resource request in which it appears. Support of all flags is optional, such as any other resource reference value. multi_token The RC wishes to support multiple simultaneous access tokens through the token rotation process. When the RC rotates an access token (Section 6.1), the AS does not invalidate the previous access token. The old access token continues to remain valid until such time as it expires or is revoked through other means. split_token The RC is capable of receiving multiple access tokens (Section 3.2.2) in response to any single token request (Section 2.1.1), or receiving a different number of tokens than specified in the multiple token request (Section 2.1.3). The labels of the returned additional tokens are chosen by the AS. The client MUST be able to tell from the token response where and how it can use the each access tokens. bind_token The RC wants the issued access token to be bound to the key the RC used (Section 2.3.2) to make the request. The resulting access token MUST be bound using the same "proof" mechanism used by the client with a "key" value of "true", indicating the client's presented key is to be used for binding. The AS MUST respond with any applied flags in the token response (Section 3.2) "resources" section. In this non-normative example, the requested access token is to be bound to the client's key and should be kept during rotation. Richer Expires 4 April 2021 [Page 25] Internet-Draft Grant Negotiation Access Protocol October 2020 "resources": [ { "type": "photo-api", "actions": [ "read", "write", "dolphin" ], "locations": [ "https://server.example.net/", "https://resource.local/other" ], "datatypes": [ "metadata", "images" ] }, "read", "bind_token", "multi_token" ] Additional flags can be registered in a registry TBD (Section 12). [[ Editor's note: while these reference values are "reserved", the ultimate decider for what a reference means is the AS, which means an AS could arguably decide that one of these values means something else. Also, this kind of reservation potentially steps on API namespaces, which OAuth 2 is careful not to do but common extensions like OIDC do with their own scope definitions. However, in OIDC, several "scope" values have behavior similar to what's defined here, particularly "openid" turns on ID tokens in the response and "offline_access" signals for the return of a refresh token, and these can be used outside of OpenID Connect itself. However, to keep these flags out of the general API namespace, we could use a different syntax for sending them. In particular, they could be defined under a GNAP-specific "type" object, where all the flags are fields on the object. Richer Expires 4 April 2021 [Page 26] Internet-Draft Grant Negotiation Access Protocol October 2020 resources: [ { type: "gnap-flags", flag1: true, flag2: false, flag3: true ... }, "reference1", "scope2", ... ] Alternatively, all the flags could be sent in an array separate from the rest of the request. resources: [ "reference1", "scope2", ["flag1", "flag2", "flag3"] ... ] This whole thing might also belong in an extension, as it's advanced behavior signaling for very specific cases. However, it seems other extensions would be likely to extend this kind of thing, like OIDC did with "offline_access". ]] 2.2. Requesting User Information If the RC is requesting information about the RO from the AS, it sends a "subject" element as a JSON object. This object MAY contain the following fields (or additional fields defined in a registry TBD (Section 12)). sub_ids An array of subject identifier subject types requested for the RO, as defined by [I-D.ietf-secevent-subject-identifiers]. assertions An array of requested assertion formats. Possible values include "id_token" for an [OIDC] ID Token and "saml2" for a SAML 2 assertion. Additional assertion values are defined by a registry TBD (Section 12). [[ Editor's note: These values are lifted from [RFC8693]'s "token type identifiers" list, but is there a better source?]] "subject": { "sub_ids": [ "iss-sub", "email" ], "assertions": [ "id_token", "saml2" ] } Richer Expires 4 April 2021 [Page 27] Internet-Draft Grant Negotiation Access Protocol October 2020 The AS can determine the RO's identity and permission for releasing this information through interaction with the RO (Section 4), AS policies, or assertions presented by the RC (Section 2.4). If this is determined positively, the AS MAY return the RO's information in its response (Section 3.4) as requested. Note: the "sub_ids" and "assertions" request fields are independent of each other, and a returned assertion MAY omit a requested subject identifier. [[ Editor's note: we're potentially conflating these two types in the same structure, so perhaps these should be split. There's also a difference between user information and authentication event information. ]] 2.3. Identifying the RC When sending a non-continuation request to the AS, the RC MUST identify itself by including the "client" field of the request and by signing the request as described in Section 8. When RC information is sent by value, the "client" field of the request consists of a JSON object with the following fields. key The public key of the RC to be used in this request as described in Section 2.3.2. This field is REQUIRED. class_id An identifier string that the AS can use to identify the software comprising this instance of the RC. The contents and format of this field are up to the AS. This field is OPTIONAL. display An object containing additional information that the AS MAY display to the RO during interaction, authorization, and management. This field is OPTIONAL. Richer Expires 4 April 2021 [Page 28] Internet-Draft Grant Negotiation Access Protocol October 2020 "client": { "key": { "proof": "httpsig", "jwk": { "kty": "RSA", "e": "AQAB", "kid": "xyz-1", "alg": "RS256", "n": "kOB5rR4Jv0GMeLaY6_It_r3ORwdf8ci_JtffXyaSx8xY..." }, "cert": "MIIEHDCCAwSgAwIBAgIBATANBgkqhkiG9w0BAQsFA..." }, "class_id": "web-server-1234", "display": { "name": "My Client Display Name", "uri": "https://example.net/client" } } The RC MUST prove possession of any presented key by the "proof" mechanism associated with the key in the request. Proof types are defined in a registry TBD (Section 12) and an initial set are of methods are described in Section 8. Note that the AS MAY know the RC's public key ahead of time, and the AS MAY apply different policies to the request depending on what has been registered against that key. If the same public key is sent by value on subsequent access requests, the AS SHOULD treat these requests as coming from the same RC software instance for purposes of identification, authentication, and policy application. If the AS does not know the RC's public key ahead of time, the AS MAY accept or reject the request based on AS policy, attestations within the client request, and other mechanisms. [[ Editor's note: additional client attestation frameworks will eventually need to be addressed here. For example, the organization the client represents, or a family of client software deployed in a cluster, or the posture of the device the client is installed on. These all need to be separable from the client's key and potentially the instance identifier. ]] 2.3.1. Identifying the RC Instance If the RC has an instance identifier that the AS can use to determine appropriate key information, the RC can send this value in the "instance_id" field. The instance identifier MAY be assigned to an RC instance at runtime through the Section 3.5 or MAY be obtained in another fashion, such as a static registration process at the AS. Richer Expires 4 April 2021 [Page 29] Internet-Draft Grant Negotiation Access Protocol October 2020 instance_id An identifier string that the AS can use to identify the particular instance of this RC. The content and structure of this identifier is opaque to the RC. "client": { "instance_id": "client-541-ab" } If there are no additional fields to send, the RC MAY send the instance identifier as a direct reference value in lieu of the object. "client": "client-541-ab" When the AS receives a request with an instance identifier, the AS MUST ensure that the key used to sign the request (Section 8) is appropriate for the instance identifier. If the "instance_id" field is sent, it MUST NOT be accompanied by other fields unless such fields are explicitly marked safe for inclusion alongside the instance identifier. [[ Editor's note: It seems clear that an instance identifier is mutually exclusive with most of the fields in the request (eg, we don't want an attacker being able to swap out a client's registered key just by accessing the identifier). However, some proposed concepts might fit alongside an instance identifier that change at runtime, such as device posture or another dynamic attestation. Should these be sent in the "client" block alongside the instance identifier, should there be a separate top-level block for runtime attestations, or some other mechanism? ]] If the AS does not recognize the instance identifier, the request MUST be rejected with an error. If the RC instance is identified in this manner, the registered key for the RC MAY be a symmetric key known to the AS. The RC MUST NOT send a symmetric key by value in the request, as doing so would expose the key directly instead of proving possession of it. [[ Editor's note: In many ways, passing an instance identifier is analogous to OAuth 2's "client_id" parameter [RFC6749], especially when coupled with a confidential client's registration and authentication process. See Appendix D.2 for an example. Something like this is required to make things easier for client developers in the common case where the AS already knows the client's key, and to allow symmetric keys. ]] Richer Expires 4 April 2021 [Page 30] Internet-Draft Grant Negotiation Access Protocol October 2020 2.3.2. Identifying the RC Key The RC key MUST be a public key in at least one supported format and MUST be applicable to the proofing mechanism used in the request. If the key is sent in multiple formats, all the keys MUST be the same. The key presented in this field MUST be the key used to sign the request. proof The form of proof that the RC will use when presenting the key to the AS. The valid values of this field and the processing requirements for each are detailed in Section 8. This field is REQUIRED. jwk Value of the public key as a JSON Web Key. MUST contain an "alg" field which is used to validate the signature. MUST contain the "kid" field to identify the key in the signed object. cert PEM serialized value of the certificate used to sign the request, with optional internal whitespace. cert#256 The certificate thumbprint calculated as per OAuth-MTLS [RFC8705] in base64 URL encoding. Additional key types are defined in a registry TBD (Section 12). [[ Editor's note: we will eventually want to have fetchable keys, I would guess. Things like DID for key identification are going to be important. ]] This non-normative example shows a single key presented in multiple formats using a single proofing mechanism. "key": { "proof": "jwsd", "jwk": { "kty": "RSA", "e": "AQAB", "kid": "xyz-1", "alg": "RS256", "n": "kOB5rR4Jv0GMeLaY6_It_r3ORwdf8ci_JtffXyaSx8xY..." }, "cert": "MIIEHDCCAwSgAwIBAgIBATANBgkqhkiG9w0BAQsFA..." } Continuation requests (Section 5) MUST use the same key and proof method as the initial request. Richer Expires 4 April 2021 [Page 31] Internet-Draft Grant Negotiation Access Protocol October 2020 2.3.3. Providing Displayable RC Information If the RC has additional information to display to the RO during any interactions at the AS, it MAY send that information in the "display" field. This field is a JSON object that declares information to present to the RO during any interactive sequences. name Display name of the RC software uri User-facing web page of the RC software logo_uri Display image to represent the RC software "display": { "name": "My Client Display Name", "uri": "https://example.net/client" } [[ Editor's note: would we want to support pushing a display logo by value? On the upside it allows for more dynamic detached clients and doesn't require the AS to fetch information. On the downside, this is harder for the AS to enforce a policy about and could lead to potential exploits caused by sending binary image files. ]] Additional display fields are defined by a registry TBD (Section 12). The AS SHOULD use these values during interaction with the RO. The values are for informational purposes only and MUST NOT be taken as authentic proof of the RC's identity or source. The AS MAY restrict display values to specific RC instances, as identified by their keys in Section 2.3. 2.3.4. Authenticating the RC If the presented key is known to the AS and is associated with a single instance of the RC software, the process of presenting a key and proving possession of that key is sufficient to authenticate the RC to the AS. The AS MAY associate policies with the RC software identified by this key, such as limiting which resources can be requested and which interaction methods can be used. For example, only specific RCs with certain known keys might be trusted with access tokens without the AS interacting directly with the RO as in Appendix D. The presentation of a key allows the AS to strongly associate multiple successive requests from the same RC with each other. This is true when the AS knows the key ahead of time and can use the key to authenticate the RC software, but also if the key is ephemeral and Richer Expires 4 April 2021 [Page 32] Internet-Draft Grant Negotiation Access Protocol October 2020 created just for this request. As such the AS MAY allow for RCs to make requests with unknown keys. This pattern allows for ephemeral RCs, such as single-page applications, and RCs with many individual instances, such as mobile applications, to generate their own key pairs and use them within the protocol without having to go through a separate registration step. The AS MAY limit which capabilities are made available to RCs with unknown keys. For example, the AS could have a policy saying that only previously-registered RCs can request particular resources, or that all RCs with unknown keys have to be interactively approved by an RO. 2.4. Identifying the User If the RC knows the identity of the RQ through one or more identifiers or assertions, the RC MAY send that information to the AS in the "user" field. The RC MAY pass this information by value or by reference. sub_ids An array of subject identifiers for the RQ, as defined by [I-D.ietf-secevent-subject-identifiers]. assertions An object containing assertions as values keyed on the assertion type defined by a registry TBD (Section 12). Possible keys include "id_token" for an [OIDC] ID Token and "saml2" for a SAML 2 assertion. Additional assertion values are defined by a registry TBD (Section 12). [[ Editor's note: These keys are lifted from [RFC8693]'s "token type identifiers" list, but is there a better source? Additionally: should this be an array of objects with internal typing like the sub_ids? Do we expect more than one assertion per user anyway? ]] "user": { "sub_ids": [ { "subject_type": "email", "email": "user@example.com" } ], "assertions": { "id_token": "eyj..." } } Subject identifiers are hints to the AS in determining the RO and MUST NOT be taken as declarative statements that a particular RO is present at the RC and acting as the RQ. Assertions SHOULD be validated by the AS. [[ editor's note: is this a MUST? Assertion validation is extremely specific to the kind of assertion in place, what other guidance and requirements can we put in place here? ]] Richer Expires 4 April 2021 [Page 33] Internet-Draft Grant Negotiation Access Protocol October 2020 If the identified RQ does not match the RO present at the AS during an interaction step, the AS SHOULD reject the request with an error. [[ Editor's note: we're potentially conflating identification (sub_ids) and provable presence (assertions and a trusted reference handle) in the same structure, so perhaps these should be split. The security parameters are pretty different here. ]] If the AS trusts the RC to present verifiable assertions, the AS MAY decide, based on its policy, to skip interaction with the RO, even if the RC provides one or more interaction capabilities in its request. 2.4.1. Identifying the User by Reference User reference identifiers can be dynamically issued by the AS (Section 3.5) to allow the RC to represent the same RQ to the AS over subsequent requests. If the RC has a reference for the RQ at this AS, the RC MAY pass that reference as a string. The format of this string is opaque to the RC. "user": "XUT2MFM1XBIKJKSDU8QM" User reference identifiers are not intended to be human-readable user identifiers or structured assertions. For the RC to send either of these, use the full user request object (Section 2.4) instead. [[ Editor's note: we might be able to fold this function into an unstructured user assertion reference issued by the AS to the RC. We could put it in as an assertion type of "gnap_reference" or something like that. Downside: it's more verbose and potentially confusing to the client developer to have an assertion-like thing that's internal to the AS and not an assertion. ]] If the AS does not recognize the user reference, it MUST return an error. 2.5. Interacting with the User If the RC is capable of driving interaction with the RQ, and the client presumes the RQ can act as the RO, the RC SHOULD declare the means that it can interact using the "interact" field. This field is a JSON object with keys that declare different interaction capabilities. A RC MUST NOT declare an interaction capability it does not support. Richer Expires 4 April 2021 [Page 34] Internet-Draft Grant Negotiation Access Protocol October 2020 The RC MAY send multiple capabilities in the same request. There is no preference order specified in this request. An AS MAY respond to any, all, or none of the presented interaction capabilities (Section 3.3) in a request, depending on its capabilities and what is allowed to fulfill the request. This specification defines the following interaction capabilities: redirect Indicates that the RC can direct the RQ to an arbitrary URL at the AS for interaction. Section 2.5.1 app Indicates that the RC can launch an application on the RQ's device for interaction. Section 2.5.2 callback Indicates that the RC can receive a callback from the AS after interaction with the RO has concluded. Section 2.5.3 user_code Indicates that the RC can communicate a human-readable short code to the RQ for use with a stable URL at the AS. Section 2.5.4 ui_locales Indicates the RQ's preferred locales that the AS can use during interaction, particularly before the RO has authenticated. Section 2.5.5 The following sections detail requests for interaction capabilities. Additional interaction capabilities are defined in a registry TBD (Section 12). [[ Editor's note: there need to be more examples (Appendix C) that knit together the interaction capabilities into common flows, like an authz-code equivalent. But it's important for the protocol design that these are separate pieces to allow such knitting to take place. ]] In this non-normative example, the RC is indicating that it can redirect (Section 2.5.1) the RQ to an arbitrary URL and can receive a callback (Section 2.5.3) through a browser request. "interact": { "redirect": true, "callback": { "method": "redirect", "uri": "https://client.example.net/return/123455", "nonce": "LKLTI25DK82FX4T4QFZC" } } Richer Expires 4 April 2021 [Page 35] Internet-Draft Grant Negotiation Access Protocol October 2020 In this non-normative example, the RC is indicating that it can display a use code (Section 2.5.4) and direct the RQ to an arbitrary URL of maximum length (Section 2.5.1.1) 255 characters, but it cannot accept a callback. "interact": { "redirect": 255, "user_code": true } If the RC does not provide a suitable interaction mechanism, the AS cannot contact the RO asynchronously, and the AS determines that interaction is required, then the AS SHOULD return an error since the RC will be unable to complete the request without authorization. The AS SHOULD apply suitable timeouts to any interaction mechanisms provided, including user codes and redirection URLs. The RC SHOULD apply suitable timeouts to any callback URLs. 2.5.1. Redirect to an Arbitrary URL If the RC is capable of directing the RQ to a URL defined by the AS at runtime, the RC indicates this by sending the "redirect" field with the boolean value "true". The means by which the RC will activate this URL is out of scope of this specification, but common methods include an HTTP redirect, launching a browser on the RQ's device, providing a scannable image encoding, and printing out a URL to an interactive console. "interact": { "redirect": true } If this interaction capability is supported for this RC and request, the AS returns a redirect interaction response Section 3.3.1. 2.5.1.1. Redirect to an Arbitrary Shortened URL If the RC would prefer to redirect to a shortened URL defined by the AS at runtime, the RC indicates this by sending the "redirect" field with an integer indicating the maximum character length of the returned URL. The AS MAY use this value to decide whether to return a shortened form of the response URL. If the AS cannot shorten its response URL enough to fit in the requested size, the AS SHOULD return an error. [[ Editor's note: Or maybe just ignore this part of the interaction request? ]] Richer Expires 4 April 2021 [Page 36] Internet-Draft Grant Negotiation Access Protocol October 2020 "interact": { "redirect": 255 } If this interaction capability is supported for this RC and request, the AS returns a redirect interaction response with short URL Section 3.3.1. 2.5.2. Open an Application-specific URL If the RC can open a URL associated with an application on the RQ's device, the RC indicates this by sending the "app" field with boolean value "true". The means by which the RC determines the application to open with this URL are out of scope of this specification. "interact": { "app": true } If this interaction capability is supported for this RC and request, the AS returns an app interaction response with an app URL payload Section 3.3.2. [[ Editor's note: this is similar to the "redirect" above today as most apps use captured URLs, but there seems to be a desire for splitting the web-based interaction and app-based interaction into different URIs. There's also the possibility of wanting more in the payload than can be reasonably put into the URL, or at least having separate payloads. ]] 2.5.3. Receive a Callback After Interaction If the RC is capable of receiving a message from the AS indicating that the RO has completed their interaction, the RC indicates this by sending the "callback" field. The value of this field is an object containing the following members. uri REQUIRED. Indicates the URI to send the RO to after interaction. This URI MAY be unique per request and MUST be hosted by or accessible by the RC. This URI MUST NOT contain any fragment component. This URI MUST be protected by HTTPS, be hosted on a server local to the RO's browser ("localhost"), or use an application-specific URI scheme. If the RC needs any state information to tie to the front channel interaction response, it MUST use a unique callback URI to link to that ongoing state. The allowable URIs and URI patterns MAY be restricted by the AS based on the RC's presented key information. The callback URI SHOULD be presented to the RO during the interaction phase before redirect. Richer Expires 4 April 2021 [Page 37] Internet-Draft Grant Negotiation Access Protocol October 2020 nonce REQUIRED. Unique value to be used in the calculation of the "hash" query parameter sent to the callback URL, must be sufficiently random to be unguessable by an attacker. MUST be generated by the RC as a unique value for this request. method REQUIRED. The callback method that the AS will use to contact the RC. Valid values include "redirect" Section 2.5.3.1 and "push" Section 2.5.3.2, with other values defined by a registry TBD (Section 12). hash_method OPTIONAL. The hash calculation mechanism to be used for the callback hash in Section 4.4.3. Can be one of "sha3" or "sha2". If absent, the default value is "sha3". [[ Editor's note: This should be expandable via a registry of cryptographic options, and it would be good if we didn't define our own identifiers here. See also note about cryptographic functions in Section 4.4.3. ]] "interact": { "callback": { "method": "redirect", "uri": "https://client.example.net/return/123455", "nonce": "LKLTI25DK82FX4T4QFZC" } } If this interaction capability is supported for this RC and request, the AS returns a nonce for use in validating the callback response (Section 3.3.3). Requests to the callback URI MUST be processed as described in Section 4.4, and the AS MUST require presentation of an interaction callback reference as described in Section 5.1. [[ Editor's note: The callback information could alternatively be combined with other methods like "redirect", but this would require each method to define its own set of rules about how callbacks can be used. Combining would also allow a client to declare that it expects a callback in response to one kind of interaction method but not others, and include multiple combinations at once. This could be accomplished by allowing the client to "bundle" interaction parameters together, if desirable - for example, if "interact" were an array, the client would accept any combination represented by one object. ]] 2.5.3.1. Receive an HTTP Callback Through the Browser A callback "method" value of "redirect" indicates that the RC will expect a call from the RO's browser using the HTTP method GET as described in Section 4.4.1. Richer Expires 4 April 2021 [Page 38] Internet-Draft Grant Negotiation Access Protocol October 2020 "interact": { "callback": { "method": "redirect", "uri": "https://client.example.net/return/123455", "nonce": "LKLTI25DK82FX4T4QFZC" } } Requests to the callback URI MUST be processed by the RC as described in Section 4.4.1. Since the incoming request to the callback URL is from the RO's browser, this method is usually used when the RO and RQ are the same entity. As such, the RC MUST ensure the RQ is present on the request to prevent substitution attacks. 2.5.3.2. Receive an HTTP Direct Callback A callback "method" value of "push" indicates that the RC will expect a call from the AS directly using the HTTP method POST as described in Section 4.4.2. "interact": { "callback": { "method": "push", "uri": "https://client.example.net/return/123455", "nonce": "LKLTI25DK82FX4T4QFZC" } } Requests to the callback URI MUST be processed by the RC as described in Section 4.4.2. Since the incoming request to the callback URL is from the AS and not from the RO's browser, the RC MUST NOT require the RQ to be present on incoming HTTP the request. 2.5.4. Display a Short User Code If the RC is capable of displaying or otherwise communicating a short, human-entered code to the RO, the RC indicates this by sending the "user_code" field with the boolean value "true". This code is to be entered at a static URL that does not change at runtime, as described in Section 3.3.4. "interact": { "user_code": true } Richer Expires 4 April 2021 [Page 39] Internet-Draft Grant Negotiation Access Protocol October 2020 If this interaction capability is supported for this RC and request, the AS returns a user code and interaction URL as specified in Section 4.2. 2.5.5. Indicate Desired Interaction Locales If the RC knows the RQ's locale and language preferences, the RC can send this information to the AS using the "ui_locales" field with an array of locale strings as defined by [RFC5646]. "interact": { "ui_locales": ["en-US", "fr-CA"] } If possible, the AS SHOULD use one of the locales in the array, with preference to the first item in the array supported by the AS. If none of the given locales are supported, the AS MAY use a default locale. 2.5.6. Extending Interaction Capabilities Additional interaction capabilities are defined in a registry TBD (Section 12). [[ Editor's note: we should have guidance in here about how to define other interaction capabilities. There's already interest in defining message-based protocols like DIDCOMM and challenge-response protocols like FIDO, for example. ]] 2.6. Declaring RC Capabilities If the RC supports extension capabilities, it MAY present them to the AS in the "capabilities" field. This field is an array of strings representing specific extensions and capabilities, as defined by a registry TBD (Section 12). "capabilities": ["ext1", "ext2"] 2.7. Referencing an Existing Grant Request If the RC has a reference handle from a previously granted request, it MAY send that reference in the "existing_grant" field. This field is a single string consisting of the "value" of the "access_token" returned in a previous request's continuation response (Section 3.1). "existing_grant": "80UPRY5NM33OMUKMKSKU" Richer Expires 4 April 2021 [Page 40] Internet-Draft Grant Negotiation Access Protocol October 2020 The AS MUST dereference the grant associated with the reference and process this request in the context of the referenced one. The AS MUST NOT alter the existing grant associated with the reference. [[ Editor's note: this basic capability is to allow for both step-up authorization and downscoped authorization, but by explicitly creating a new request and not modifying an existing one. What's the best guidance for how an AS should process this? ]] 2.8. Requesting OpenID Connect Claims If the RC and AS both support OpenID Connect's claims query language as defined in [OIDC] Section 5.5, the RC sends the value of the OpenID Connect "claims" authorization request parameter as a JSON object under the name "claims" in the root of the request. "claims": { "id_token" : { "email" : { "essential" : true }, "email_verified" : { "essential" : true } }, "userinfo" : { "name" : { "essential" : true }, "picture" : null } } The contents of the "claims" parameter have the same semantics as they do in OpenID Connect's "claims" authorization request parameter, including all extensions such as [OIDC4IA]. The AS MUST process the claims object in the same way that it would with an OAuth 2 based authorization request. Note that because this is an independent query object, the "claims" value can augment or alter other portions of the request, namely the "resources" and "subject" fields. This query language uses the fields in the top level of the object to indicate the target for any requested claims. For instance, the "userinfo" target indicates that an access token would grant access to the given claims at the UserInfo Endpoint, while the "id_token" target indicates that the claims would be returned in an ID Token as described in Section 3.4. [[ Editor's note: I'm not a fan of GNAP defining how OIDC would work and would rather that work be done by the OIDF in an extension. However, I think it is important for discussion to see this kind of thing in context with the rest of the protocol, for now. ]] Richer Expires 4 April 2021 [Page 41] Internet-Draft Grant Negotiation Access Protocol October 2020 2.9. Extending The Grant Request The request object MAY be extended by registering new items in a registry TBD (Section 12). Extensions SHOULD be orthogonal to other parameters. Extensions MUST document any aspects where the extension item affects or influences the values or behavior of other request and response objects. [[ Editor's note: we should have more guidance and examples on what possible top-level extensions would look like. ]] 3. Grant Response In response to a RC's request, the AS responds with a JSON object as the HTTP entity body. In this example, the AS is returning an interaction URL (Section 3.3.1), a callback nonce (Section 3.3.3), and a continuation handle (Section 3.1). { "interact": { "redirect": "https://server.example.com/interact/4CF492MLVMSW9MKMXKHQ", "callback": "MBDOFXG4Y5CVJCX821LH" }, "continue": { "access_token": { "value": "80UPRY5NM33OMUKMKSKU", "key": true }, "handle": "", "uri": "https://server.example.com/tx" } } In this example, the AS is returning a bearer access token (Section 3.2.1) with a management URL and a subject identifier (Section 3.4) in the form of an email address. Richer Expires 4 April 2021 [Page 42] Internet-Draft Grant Negotiation Access Protocol October 2020 { "access_token": { "value": "OS9M2PMHKUR64TB8N6BW7OZB8CDFONP219RP1LT0", "key": false, "manage": "https://server.example.com/token/PRY5NM33OM4TB8N6BW7OZB8CDFONP219RP1L" }, "subject": { "sub_ids": [ { "subject_type": "email", "email": "user@example.com", } ] } } 3.1. Request Continuation If the AS determines that the request can be continued with additional requests, it responds with the "continue" field. This field contains a JSON object with the following properties. uri REQUIRED. The URI at which the RC can make continuation requests. This URI MAY vary request, or MAY be stable at the AS if the AS includes an access token. The RC MUST use this value exactly as given when making a continuation request (Section 5). wait RECOMMENDED. The amount of time in integer seconds the RC SHOULD wait after receiving this continuation handle and calling the URI. access_token RECOMMENDED. A unique access token for continuing the request, in the format specified in Section 3.2.1. This access token MUST be bound to the RC's key used in the request and MUST NOT be a "bearer" token. This access token MUST NOT be usable at resources outside of the AS. [[ Editor's note: Is this a restriction we want to enforce? ]] If the AS includes an access token, the RC MUST present the access token in all requests to the continuation URI as described in Section 7. { "continue": { "access_token": { "value": "80UPRY5NM33OMUKMKSKU", "key": true }, "uri": "https://server.example.com/continue", "wait": 60 } } Richer Expires 4 April 2021 [Page 43] Internet-Draft Grant Negotiation Access Protocol October 2020 The RC can use the values of this field to continue the request as described in Section 5. Note that the RC MUST sign all continuation requests with its key as described in Section 8. If the AS includes an "access_token", the RC MUST present the access token in its continuation request. This field SHOULD be returned when interaction is expected, to allow the RC to follow up after interaction has been concluded. [[ Editor's note: The AS can use the optional "access_token" as a credential for the client to manage the grant request itself over time. This is in parallel with access token management as well as RS access in general. If the AS uses the access token, the continuation URL can be static, and potentially even the same as the initial request URL. If the AS does not use an access token here, it needs to use unique URLs in its response and bind the client's key to requests to those URLs - or potentially only allow one request per client at a time? The optionality adds a layer of complexity, but the client behavior is deterministic in all possible cases and it re- uses existing functions and structures instead of inventing something special just to talk to the AS. ]] 3.2. Access Tokens If the AS has successfully granted one or more access tokens to the RC, the AS responds with either the "access_token" or the "multiple_access_token" field. The AS MUST NOT respond with both the "access_token" and "multiple_access_token" fields. [[ Editor's note: I really don't like the dichotomy between "access_token" and "multiple_access_tokens" and their being mutually exclusive, and I think we should design away from this pattern toward something less error-prone. ]] 3.2.1. Single Access Token If the RC has requested a single access token and the AS has granted that access token, the AS responds with the "access_token" field. The value of this field is an object with the following properties. value REQUIRED. The value of the access token as a string. The value is opaque to the RC. The value SHOULD be limited to ASCII characters to facilitate transmission over HTTP headers within other protocols without requiring additional encoding. manage OPTIONAL. The management URI for this access token. If Richer Expires 4 April 2021 [Page 44] Internet-Draft Grant Negotiation Access Protocol October 2020 provided, the RC MAY manage its access token as described in Section 6. This management URI is a function of the AS and is separate from the RS the RC is requesting access to. This URI MUST NOT include the access token value and SHOULD be different for each access token issued in a request. resources RECOMMENDED. A description of the rights associated with this access token, as defined in Section 3.2.1. If included, this MUST reflect the rights associated with the issued access token. These rights MAY vary from what was requested by the RC. expires_in OPTIONAL. The number of seconds in which the access will expire. The RC MUST NOT use the access token past this time. An RS MUST NOT accept an access token past this time. Note that the access token MAY be revoked by the AS or RS at any point prior to its expiration. key REQUIRED. The key that the token is bound to. If the boolean value "true" is used, the token is bound to the key used by the RC (Section 2.3.2) in its request for access. If the boolean value "false" is used, the token is a bearer token with no key bound to it. Otherwise, the key MUST be an object or string in a format described in Section 2.3.2, describing a public key to which the RC can use the associated private key. The RC MUST be able to dereference or process the key information in order to be able to sign the request. The following non-normative example shows a single bearer token with a management URL that has access to three described resources. Richer Expires 4 April 2021 [Page 45] Internet-Draft Grant Negotiation Access Protocol October 2020 "access_token": { "value": "OS9M2PMHKUR64TB8N6BW7OZB8CDFONP219RP1LT0", "key": false, "manage": "https://server.example.com/token/PRY5NM33OM4TB8N6BW7OZB8CDFONP219RP1L", "resources": [ { "type": "photo-api", "actions": [ "read", "write", "dolphin" ], "locations": [ "https://server.example.net/", "https://resource.local/other" ], "datatypes": [ "metadata", "images" ] }, "read", "dolphin-metadata" ] } The following non-normative example shows a single access token bound to the RC's key, which was presented using the detached JWS (Section 8.1) binding method. "access_token": { "value": "OS9M2PMHKUR64TB8N6BW7OZB8CDFONP219RP1LT0", "key": true, "resources": [ "finance", "medical" ] } If the RC requested multiple access tokens (Section 2.1.3), the AS MUST NOT respond with a single access token structure unless the RC sends the "split_token" flag as described in Section 2.1.4. [[ Editor's note: There has been interest in describing a way for the AS to tell the client both how and where to use the token. This kind of directed access token could allow for some interesting deployment patterns where the client doesn't know much]] Richer Expires 4 April 2021 [Page 46] Internet-Draft Grant Negotiation Access Protocol October 2020 3.2.2. Multiple Access Tokens If the RC has requested multiple access tokens and the AS has granted at least one of them, the AS responds with the "multiple_access_tokens" field. The value of this field is a JSON object, and the property names correspond to the token identifiers chosen by the RC in the multiple access token request (Section 2.1.3). The values of the properties of this object are access tokens as described in Section 3.2.1. In this non-normative example, two bearer tokens are issued under the names "token1" and "token2", and only the first token has a management URL associated with it. "multiple_access_tokens": { "token1": { "value": "OS9M2PMHKUR64TB8N6BW7OZB8CDFONP219RP1LT0", "key": false, "manage": "https://server.example.com/token/PRY5NM33OM4TB8N6BW7OZB8CDFONP219RP1L" }, "token2": { "value": "UFGLO2FDAFG7VGZZPJ3IZEMN21EVU71FHCARP4J1", "key": false } } Each access token corresponds to the named resources arrays in the RC's request (Section 2.1.3). The multiple access token response MUST be used when multiple access tokens are requested, even if only one access token is issued as a result of the request. The AS MAY refuse to issue one or more of the requested access tokens, for any reason. In such cases the refused token is omitted from the response and all of the other issued access tokens are included in the response the requested names appropriate names. If the RC requested a single access token (Section 2.1.1), the AS MUST NOT respond with multiple multiple access token structure unless the RC sends the "split_token" flag as described in Section 2.1.4. Each access token MAY have different proofing mechanisms. If management is allowed, each access token SHOULD have different management URIs. [[ Editor's note: Do we need to specify that the management URIs are different if we require the token to be presented? ]] Richer Expires 4 April 2021 [Page 47] Internet-Draft Grant Negotiation Access Protocol October 2020 3.3. Interaction Capabilities If the RC has indicated a capability to interact with the RO in its request (Section 2.5), and the AS has determined that interaction is both supported and necessary, the AS responds to the RC with any of the following values in the "interact" field of the response. There is no preference order for interaction capabilities in the response, and it is up to the RC to determine which ones to use. The AS MUST NOT respond with any interaction capability that the RC did not indicate in its request. 3.3.1. Redirection to an arbitrary URL If the RC indicates that it can redirect to an arbitrary URL (Section 2.5.1) and the AS supports this capability for the RC's request, the AS responds with the "redirect" field, which is a string containing the URL to direct the RQ to. This URL MUST be unique for the request and MUST NOT contain any security-sensitive information. "interact": { "redirect": "https://interact.example.com/4CF492MLVMSW9MKMXKHQ" } The interaction URL returned represents a function of the AS but MAY be completely distinct from the URL the RC uses to request access (Section 2), allowing an AS to separate its user-interactive functionality from its back-end security functionality. [[ Editor's note: This is one aspect where the AS might actually be two separate roles. Namely, a delegation server (back end) and interaction server (user-facing).]] The RC sends the RQ to the URL to interact with the AS. The RC MUST NOT alter the URL in any way. The means for the RC to send the RQ to this URL is out of scope of this specification, but common methods include an HTTP redirect, launching the system browser, displaying a scannable code, or printing out the URL in an interactive console. 3.3.2. Launch of an application URL If the RC indicates that it can launch an application URL (Section 2.5.2) and the AS supports this capability for the RC's request, the AS responds with the "app" field, which is a string containing the URL to direct the RQ to. This URL MUST be unique for the request and MUST NOT contain any security-sensitive information. Richer Expires 4 April 2021 [Page 48] Internet-Draft Grant Negotiation Access Protocol October 2020 "interact": { "app": "https://app.example.com/launch?tx=4CF492MLV" } The RC launches the URL as appropriate on its platform, and the means for the RC to launch this URL is out of scope of this specification. The RC MUST NOT alter the URL in any way. The RC MAY attempt to detect if an installed application will service the URL being sent before attempting to launch the application URL. [[ Editor's note: This will probably need to be expanded to an object to account for other parameters needed in app2app use cases, like addresses for distributed storage systems, server keys, and the like. Details TBD as people build this out. ]] 3.3.3. Callback to URL If the RC indicates that it can receive a post-interaction callback on a URL (Section 2.5.3) and the AS supports this capability for the RC's request, the AS responds with a "callback" field containing a nonce that the RC will use in validating the callback as defined in Section 4.4.1. "interact": { "callback": "MBDOFXG4Y5CVJCX821LH" } [[ Editor's note: This is fairly parallel to the request but it kinda hides the fact that this is a nonce from the AS, not the client. ]] When the RO completes interaction at the AS, the AS MUST call the RC's callback URL using the method indicated in the callback request (Section 2.5.3) as described in Section 4.4.1. If the AS returns a "callback" nonce, the RC MUST NOT continue a grant request before it receives the associated interaction reference on the callback URI. 3.3.4. Display of a Short User Code If the RC indicates that it can display a short user-typeable code (Section 2.5.4) and the AS supports this capability for the RC's request, the AS responds with a "user_code" field. This field is an object that contains the following members. code REQUIRED. A unique short code that the user can type into an Richer Expires 4 April 2021 [Page 49] Internet-Draft Grant Negotiation Access Protocol October 2020 authorization server. This string MUST be case-insensitive, MUST consist of only easily typeable characters (such as letters or numbers). The time in which this code will be accepted SHOULD be short lived, such as several minutes. It is RECOMMENDED that this code be no more than eight characters in length. url RECOMMENDED. The interaction URL that the RC will direct the RO to. This URL MUST be stable at the AS such that RCs can be statically configured with it. "interact": { "user_code": { "code": "A1BC-3DFF", "url": "https://srv.ex/device" } } The RC MUST communicate the "code" to the RQ in some fashion, such as displaying it on a screen or reading it out audibly. The "code" is a one-time-use credential that the AS uses to identify the pending request from the RC. When the RO enters this code (Section 4.2) into the AS, the AS MUST determine the pending request that it was associated with. If the AS does not recognize the entered code, the AS MUST display an error to the user. If the AS detects too many unrecognized codes entered, it SHOULD display an error to the user. The RC SHOULD also communicate the URL if possible to facilitate user interaction, but since the URL should be stable, the RC should be able to safely decide to not display this value. As this interaction capability is designed to facilitate interaction via a secondary device, it is not expected that the RC redirect the RQ to the URL given here at runtime. Consequently, the URL needs to be stable enough that a RC could be statically configured with it, perhaps referring the RQ to the URL via documentation instead of through an interactive means. If the RC is capable of communicating an arbitrary URL to the RQ, such as through a scannable code, the RC can use the "redirect" (Section 2.5.1) capability for this purpose instead of or in addition to the user code capability. The interaction URL returned represents a function of the AS but MAY be completely distinct from the URL the RC uses to request access (Section 2), allowing an AS to separate its user-interactive functionality from its back-end security functionality. [[ Editor's note: This is one aspect where the AS might actually be two separate roles. Namely, a delegation server (back end) and interaction server (user-facing).]] Richer Expires 4 April 2021 [Page 50] Internet-Draft Grant Negotiation Access Protocol October 2020 3.3.5. Extending Interaction Capability Responses Extensions to this specification can define new interaction capability responses in a registry TBD (Section 12). Extensions MUST document the corresponding interaction request. 3.4. Returning User Information If information about the RO is requested and the AS grants the RC access to that data, the AS returns the approved information in the "subject" response field. This field is an object with the following OPTIONAL properties. sub_ids An array of subject identifiers for the RO, as defined by [I-D.ietf-secevent-subject-identifiers]. [[ Editor's note: privacy considerations are needed around returning identifiers. ]] assertions An object containing assertions as values keyed on the assertion type defined by a registry TBD (Section 12). [[ Editor's note: should this be an array of objects with internal typing like the sub_ids? Do we expect more than one assertion per user anyway? ]] updated_at Timestamp in integer seconds indicating when the identified account was last updated. The RC MAY use this value to determine if it needs to request updated profile information through an identity API. The definition of such an identity API is out of scope for this specification. "subject": { "sub_ids": [ { "subject_type": "email", "email": "user@example.com", } ], "assertions": { "id_token": "eyj..." } } Extensions to this specification MAY define additional response properties in a registry TBD (Section 12). 3.5. Returning Dynamically-bound Reference Handles Many parts of the RC's request can be passed as either a value or a reference. The use of a reference in place of a value allows for a client to optimize requests to the AS. Richer Expires 4 April 2021 [Page 51] Internet-Draft Grant Negotiation Access Protocol October 2020 Some references, such as for the RC instance's identity (Section 2.3.1) or the requested resources (Section 2.1.2), can be managed statically through an admin console or developer portal provided by the AS or RS. The developer of the RC can include these values in their code for a more efficient and compact request. If desired, the AS MAY also generate and return some of these references dynamically to the RC in its response to facilitate multiple interactions with the same software. The RC SHOULD use these references in future requests in lieu of sending the associated data value. These handles are intended to be used on future requests. Dynamically generated handles are string values that MUST be protected by the RC as secrets. Handle values MUST be unguessable and MUST NOT contain any sensitive information. Handle values are opaque to the RC. [[ Editor's note: these used to be objects to allow for expansion to future elements, like a management URI or different presentation types or expiration, but those weren't used in practice. Is that desirable anymore or is collapsing them like this the right direction? ]] All dynamically generated handles are returned as fields in the root JSON object of the response. This specification defines the following dynamic handle returns, additional handles can be defined in a registry TBD (Section 12). instance_id A string value used to represent the information in the "client" object that the RC can use in a future request, as described in Section 2.3.1. user_handle A string value used to represent the current user. The RC can use in a future request, as described in Section 2.4.1. This non-normative example shows two handles along side an issued access token. { "user_handle": "XUT2MFM1XBIKJKSDU8QM", "instance_id": "7C7C4AZ9KHRS6X63AJAO", "access_token": { "value": "OS9M2PMHKUR64TB8N6BW7OZB8CDFONP219RP1LT0", "key": false } } Richer Expires 4 April 2021 [Page 52] Internet-Draft Grant Negotiation Access Protocol October 2020 [[ Editor's note: the ability to dynamically return reference handles allows for an inline version of dynamic registration without needing to go through a discrete registration step, for clients where that makes sense. Currently this is entirely up to the AS to decide when to issue these, but maybe the client should signal that it can receive these handles as part of the request? The new "token flags" construct in Section 2.1.4 almost gets at that, but for a different part of the request structure. Since the client is the component that will know if it's in a position to make use of such reference handles in the future (like a mobile app) or if it's just going to evaporate at the end of a session (like an SPA). Ultimately we need to deal with a range of dynamism, not just the "pre-registered" vs. "non-registered" use cases that OAuth forces us in to. ]] [[ Editor's note: The client-bound "instance_id" could serve as the hook we would need for RFC7592 style dynamic client management, including additional elements like key rotation. If the AS returns an object instead of a string here, that could include everything that the client would need in order to make REST-style management calls, similar to token management. { "client": { "instance_id": "7C7C4AZ9KHRS6X63AJAO", "manage": "https://example.server.com/client/7C7C4AZ9KHRS6X63AJAO", "access_token": { "value": "4TB8N6BW7OZB8CDFONP219RP1LT0OS9M2PMHKUR6", "key": true } } } The client would sign all requests with its key and use the presented access token. A "POST" or "PATCH" request would update client information, including having a method for key rotation using nested signatures. A "DELETE" request would un-register the client, etc. ]] 3.6. Error response If the AS determines that the request cannot be issued for any reason, it responds to the RC with an error message. error The error code. Richer Expires 4 April 2021 [Page 53] Internet-Draft Grant Negotiation Access Protocol October 2020 { "error": "user_denied" } The error code is one of the following, with additional values available in a registry TBD (Section 12): user_denied The RO denied the request. too_fast The RC did not respect the timeout in the wait response. unknown_request The request referenced an unknown ongoing access request. [[ Editor's note: I think we will need a more robust error mechanism, and we need to be more clear about what error states are allowed in what circumstances. Additionally, is the "error" parameter exclusive with others in the return? ]] 3.7. Extending the Response Extensions to this specification MAY define additional fields for the grant response in a registry TBD (Section 12). [[ Editor's note: what guidance should we give to designers on this? ]] 4. Interaction at the AS If the RC indicates that it is capable of driving interaction with the RO in its request (Section 2.5), and the AS determines that interaction is required and responds to one or more of the RC's interaction capabilities, the RC SHOULD initiate one of the returned interaction capabilities in the response (Section 3.3). When the RO is interacting with the AS, the AS MAY perform whatever actions it sees fit, including but not limited to: * authenticate the current user (who may be the RQ) as the RO * gather consent and authorization from the RO for access to requested resources and direct information * allow the RO to modify the parameters of the request (such as disallowing some requested resources or specifying an account or record) Richer Expires 4 April 2021 [Page 54] Internet-Draft Grant Negotiation Access Protocol October 2020 * provide warnings to the RO about potential attacks or negative effects of the requested information [[ Editor's note: there are some privacy and security considerations here but for the most part we don't want to be overly prescriptive about the UX, I think. ]] 4.1. Interaction at a Redirected URI When the RO is directed to the AS through the "redirect" (Section 3.3.1) capability, the AS can interact with the RO through their web browser to authenticate the user as an RO and gather their consent. Note that since the RC does not add any parameters to the URL, the AS MUST determine the grant request being referenced from the URL value itself. If the URL cannot be associated with a currently active request, the AS MUST display an error to the RO and MUST NOT attempt to redirect the RO back to any RC even if a callback is supplied (Section 2.5.3). The interaction URL MUST be reachable from the RO's browser, though note that the RO MAY open the URL on a separate device from the RC itself. The interaction URL MUST be accessible from an HTTP GET request, and MUST be protected by HTTPS or equivalent means. With this method, it is common for the RO to be the same party as the RQ, since the RC has to communicate the redirection URI to the RQ. 4.2. Interaction at the User Code URI When the RO is directed to the AS through the "user_code" (Section 3.3.4) capability, the AS can interact with the RO through their web browser to collect the user code, authenticate the user as an RO, and gather their consent. Note that since the URL itself is static, the AS MUST determine the grant request being referenced from the user code value itself. If the user code cannot be associated with a currently active request, the AS MUST display an error to the RO and MUST NOT attempt to redirect the RO back to any RC even if a callback is supplied (Section 2.5.3). The user code URL MUST be reachable from the RO's browser, though note that the RO MAY open the URL on a separate device from the RC itself. The user code URL MUST be accessible from an HTTP GET request, and MUST be protected by HTTPS or equivalent means. While it is common for the RO to be the same party as the RQ, since the RC has to communicate the user code to someone, there are cases where the RQ and RO are separate parties and the authorization happens asynchronously. Richer Expires 4 April 2021 [Page 55] Internet-Draft Grant Negotiation Access Protocol October 2020 4.3. Interaction through an Application URI When the RC successfully launches an application through the "app" capability (Section 3.3.2), the AS interacts with the RO through that application to authenticate the user as the RO and gather their consent. The details of this interaction are out of scope for this specification. [[ Editor's note: Should we have anything to say about an app sending information to a back-end to get details on the pending request? ]] 4.4. Post-Interaction Completion Upon completing an interaction with the RO, if a "callback" (Section 3.3.3) capability is available with the current request, the AS MUST follow the appropriate method at the end of interaction to allow the RC to continue. If this capability is not available, the AS SHOULD instruct the RO to return to their RC software upon completion. Note that these steps still take place in most error cases, such as when the RO has denied access. This pattern allows the RC to potentially recover from the error state without restarting the request from scratch. [[ Editor's note: there might be some other kind of push-based notification or callback that the client can use, or an out-of-band non-HTTP protocol. The AS would know about this if supported and used, but the guidance here should be written in such a way as to not be too restrictive in the next steps that it can take. Still, it's important that the AS not expect or even allow clients to poll if the client has stated it can take a callback of some form, otherwise that sets up a potential session fixation attack vector that the client is trying to and able to avoid. ]] The AS MUST calculate a hash value as described in Section 4.4.3. The RC will use this value to validate the return call from the AS. The AS MUST create an interaction reference and associate that reference with the current interaction and the underlying pending request. This value MUST be sufficiently random so as not to be guessable by an attacker. The AS then MUST send the hash and interaction reference based on the interaction finalization capability as described in the following sections. Richer Expires 4 April 2021 [Page 56] Internet-Draft Grant Negotiation Access Protocol October 2020 4.4.1. Completing Interaction with a Browser Redirect to the Callback URI When using the "callback" interaction capability (Section 3.3.3) with the "redirect" method, the AS signals to the RC that interaction is complete and the request can be continued by directing the RO (in their browser) back to the RC's callback URL sent in the callback request (Section 2.5.3.1). The AS secures this callback by adding the hash and interaction reference as query parameters to the RC's callback URL. hash REQUIRED. The interaction hash value as described in Section 4.4.3. interact_ref REQUIRED. The interaction reference generated for this interaction. The means of directing the RO to this URL are outside the scope of this specification, but common options include redirecting the RO from a web page and launching the system browser with the target URL. https://client.example.net/return/123455 ?hash=p28jsq0Y2KK3WS__a42tavNC64ldGTBroywsWxT4md_jZQ1R2HZT8BOWYHcLmObM7XHPAdJzTZMtKBsaraJ64A &interact_ref=4IFWWIKYBC2PQ6U56NL1 When receiving the request, the RC MUST parse the query parameters to calculate and validate the hash value as described in Section 4.4.3. If the hash validates, the RC sends a continuation request to the AS as described in Section 5.1 using the interaction reference value received here. 4.4.2. Completing Interaction with a Direct HTTP Request Callback When using the "callback" interaction capability (Section 3.3.3) with the "push" method, the AS signals to the RC that interaction is complete and the request can be continued by sending an HTTP POST request to the RC's callback URL sent in the callback request (Section 2.5.3.2). The entity message body is a JSON object consisting of the following two elements: hash REQUIRED. The interaction hash value as described in Section 4.4.3. interact_ref REQUIRED. The interaction reference generated for this interaction. Richer Expires 4 April 2021 [Page 57] Internet-Draft Grant Negotiation Access Protocol October 2020 POST /push/554321 HTTP/1.1 Host: client.example.net Content-Type: application/json { "hash": "p28jsq0Y2KK3WS__a42tavNC64ldGTBroywsWxT4md_jZQ1R2HZT8BOWYHcLmObM7XHPAdJzTZMtKBsaraJ64A", "interact_ref": "4IFWWIKYBC2PQ6U56NL1" } When receiving the request, the RC MUST parse the JSON object and validate the hash value as described in Section 4.4.3. If the hash validates, the RC sends a continuation request to the AS as described in Section 5.1 using the interaction reference value received here. 4.4.3. Calculating the interaction hash The "hash" parameter in the request to the RC's callback URL ties the front channel response to an ongoing request by using values known only to the parties involved. This security mechanism prevents several kinds of session fixation attacks against the RC. To calculate the "hash" value, the party doing the calculation first takes the "nonce" value sent by the RC in the interaction section of the initial request (Section 2.5.3), the AS's nonce value from the callback response (Section 3.3.3), and the "interact_ref" sent to the RC's callback URL. These three values are concatenated to each other in this order using a single newline character as a separator between the fields. There is no padding or whitespace before or after any of the lines, and no trailing newline character. VJLO6A4CAYLBXHTR0KRO MBDOFXG4Y5CVJCX821LH 4IFWWIKYBC2PQ6U56NL1 The party then hashes this string with the appropriate algorithm based on the "hash_method" parameter of the "callback". If the "hash_method" value is not present in the RC's request, the algorithm defaults to "sha3". [[ Editor's note: these hash algorithms should be pluggable, and ideally we shouldn't redefine yet another crypto registry for this purpose, but I'm not convinced an appropriate one already exists. Furthermore, we should be following best practices here whether it's a plain hash, a keyed MAC, an HMAC, or some other form of cryptographic function. I'm not sure what the defaults and options ought to be, but SHA512 and SHA3 were picked based on what was available to early developers. ]] Richer Expires 4 April 2021 [Page 58] Internet-Draft Grant Negotiation Access Protocol October 2020 4.4.3.1. SHA3-512 The "sha3" hash method consists of hashing the input string with the 512-bit SHA3 algorithm. The byte array is then encoded using URL Safe Base64 with no padding. The resulting string is the hash value. p28jsq0Y2KK3WS__a42tavNC64ldGTBroywsWxT4md_jZQ1R2HZT8BOWYHcLmObM7XHPAdJzTZMtKBsaraJ64A 4.4.3.2. SHA2-512 The "sha2" hash method consists of hashing the input string with the 512-bit SHA2 algorithm. The byte array is then encoded using URL Safe Base64 with no padding. The resulting string is the hash value. 62SbcD3Xs7L40rjgALA-ymQujoh2LB2hPJyX9vlcr1H6ecChZ8BNKkG_HrOKP_Bpj84rh4mC9aE9x7HPBFcIHw 5. Continuing a Grant Request If the RC receives a "continue" element in its response Section 3.1, the RC can make an HTTP POST call to the continuation URI. The RC MUST present proof of the same key identified in the initial request (Section 2.3.2) by signing the request as described in Section 8. This requirement is in place whether or not the AS had previously registered the RC's key as described in Section 2.3.4. If the AS includes an "access_token" in the continue response in Section 3.1, the RC MUST include the access token in a manner appropriate for the token's binding type, as described in Section 7. POST /continue HTTP/1.1 Host: server.example.com Authorization: GNAP 80UPRY5NM33OMUKMKSKU Detached-JWS: ejy0... The RC MAY include a request body containing parameters as described here or as defined a registry TBD (Section 12). If the body is included, it MUST be a JSON object as described in Section 2. POST /continue HTTP/1.1 Host: server.example.com Content-type: application/json Authorization: GNAP 80UPRY5NM33OMUKMKSKU Detached-JWS: ejy0... { "interact_ref": "4IFWWIKYBC2PQ6U56NL1" } Richer Expires 4 April 2021 [Page 59] Internet-Draft Grant Negotiation Access Protocol October 2020 [[ Editor's note: We probably want to control how we allow sending other request parameters, like modifying the resources requested or providing more user information. We'll certainly have some kinds of specific challenge-response protocols as there's already been interest in that kind of thing, and the continuation request is the place where that would fit. Ultimately, nearly anything in the "request" object could be argued for inclusion here. ]] If a "wait" parameter was included in the continuation response, the RC MUST NOT call the continuation URI prior to waiting the number of seconds indicated. If no "wait" period is indicated, the RC SHOULD wait at least 5 seconds [[ Editor's note: what's a reasonable amount of time so as not to DOS the server?? ]]. If the RC does not respect the given wait period, the AS MUST return an error. The response from the AS is a JSON object and MAY contain any of the elements described in Section 3, with the following variations: If the AS determines that the RC can make a further continuation request, the AS MUST include a new "continue" response element (Section 3.1). The returned handle value MUST NOT be the same as that used to make the continuation request, and the continuation URI MAY remain the same. If the AS does not return a new "continue" response element, the RC MUST NOT make an additional continuation request. If a RC does so, the AS MUST return an error. If the AS determines that the RC still needs to drive interaction with the RQ, the AS MAY return appropriate responses for any of the interaction mechanisms (Section 3.3) the RC indicated in its initial request (Section 2.5). Unique values such as interaction URIs and nonces SHOULD be re-generated and not re-used. [[ Editor's note: Additional methods could be defined on the continuation endpoint for different functions, like DELETE for canceling a grant request. The client's continuation request fit POST fine though as it's a non-idempotent request (even without a body). 5.1. Continuing after a Finalized Interaction If the RC has received an interaction reference from a "callback" (Section 4.4.1) message, the RC MUST include the "interaction_ref" in its continuation request. The RC MUST validate the hash before making the continuation request, but note that the RC does not send the hash back to the AS in the request. Richer Expires 4 April 2021 [Page 60] Internet-Draft Grant Negotiation Access Protocol October 2020 POST /continue/80UPRY5NM33OMUKMKSKU HTTP/1.1 Host: server.example.com Content-type: application/json Detached-JWS: ejy0... { "interact_ref": "4IFWWIKYBC2PQ6U56NL1" } 5.2. Continuing after Tokens are Issued A request MAY be continued even after access tokens have been issued, so long as the handle is valid. The AS MAY respond to such a continuation request with new access tokens as described in Section 3.2 based on the RC's original request. The AS SHOULD revoke existing access tokens. If the AS determines that the RC can make a further continuation request in the future, the AS MUST include a new "continue" response element (Section 3.1). The returned handle value MUST NOT be the same as that used to make the continuation request, and the continuation URI MAY remain the same. If the AS does not return a new "continue" response element, the RC MUST NOT make an additional continuation request. If the RC does so, the AS MUST return an error. [[ Editor's note: The ability to continue a grant to get a new access token with the same rights has some potential overlap here with the functionality that allows the rotation of an individual access token in Section 6.1. It seems like this would still be needed to modify the entire request, but for the common case where you've got a single access token in the response, you've got two ways to do almost the same thing, which is confusing for client developers. We need to discuss how best to manage these patterns in concert with each other. ]] 6. Token Management If an access token response includes the "manage" parameter as described in Section 3.2.1, the RC MAY call this URL to manage the access token with any of the actions defined in the following sections. Other actions are undefined by this specification. The access token being managed acts as the access element for its own management API. The RC MUST present proof of an appropriate key along with the access token. If the token is sender-constrained (i.e., not a bearer token), it MUST be sent with the appropriate binding for the access token (Section 7). Richer Expires 4 April 2021 [Page 61] Internet-Draft Grant Negotiation Access Protocol October 2020 If the token is a bearer token, the RC MUST present proof of the same key identified in the initial request (Section 2.3.2) as described in Section 8. The AS MUST validate the proof and assure that it is associated with either the token itself or the RC the token was issued to, as appropriate for the token's presentation type. [[ Editor's note: Should we allow for "update" to an access token by the client posting new information from a "request"? It seems this might make things weird since an access token is generally considered an unchanging thing, and the client could always request a new access token if they're allowed to continue the grant request post-issuance as in Section 5.2. There's also a possibility of being able to "read" a token's state, much like token introspection but using the token's/client's key instead of the RS key. But would a client need to "read" a token state after issuance? Is there a security risk to offering that functionality? Introspection is nearly always relegated to RS calls. ]] 6.1. Rotating the Access Token The RC makes an HTTP POST to the token management URI, sending the access token in the appropriate header and signing the request with the appropriate key. POST /token/PRY5NM33OM4TB8N6BW7OZB8CDFONP219RP1L HTTP/1.1 Host: server.example.com Authorization: GNAP OS9M2PMHKUR64TB8N6BW7OZB8CDFONP219RP1LT0 Detached-JWS: eyj0.... The AS validates that the token presented is associated with the management URL, that the AS issued the token to the given RC, and that the presented key is appropriate to the token. If the access token has expired, the AS SHOULD honor the rotation request to the token management URL since it is likely that the RC is attempting to refresh the expired token. To support this, the AS MAY apply different lifetimes for the use of the token in management vs. its use at an RS. An AS MUST NOT honor a rotation request for an access token that has been revoked, either by the AS or by the RC through the token management URI (Section 6.2). If the token is validated and the key is appropriate for the request, the AS MUST invalidate the current access token associated with this URL, if possible, and return a new access token response as described in Section 3.2.1. The value of the access token MUST NOT be the same as the current value of the access token used to access the Richer Expires 4 April 2021 [Page 62] Internet-Draft Grant Negotiation Access Protocol October 2020 management API. The response MAY include an updated access token management URL as well, and if so, the RC MUST use this new URL to manage the new access token. { "access_token": { "value": "FP6A8H6HY37MH13CK76LBZ6Y1UADG6VEUPEER5H2", "key": false, "manage": "https://server.example.com/token/PRY5NM33OM4TB8N6BW7OZB8CDFONP219RP1L", "resources": [ { "type": "photo-api", "actions": [ "read", "write", "dolphin" ], "locations": [ "https://server.example.net/", "https://resource.local/other" ], "datatypes": [ "metadata", "images" ] }, "read", "dolphin-metadata" ] } } [[ Editor's note: If the client is using its own key as the proof, like with a bearer access token, the AS is going to need to know if the client's key has been rotated. We don't have a mechanism for rotating the token's key or the client's key yet either - so that could occur through this management function as well. ]] 6.2. Revoking the Access Token If the RC wishes to revoke the access token proactively, such as when a user indicates to the RC that they no longer wish for it to have access or the RC application detects that it is being uninstalled, the RC can use the token management URI to indicate to the AS that the AS should invalidate the access token for all purposes. The RC makes an HTTP DELETE request to the token management URI, signing the request with its key. Richer Expires 4 April 2021 [Page 63] Internet-Draft Grant Negotiation Access Protocol October 2020 DELETE /token/PRY5NM33OM4TB8N6BW7OZB8CDFONP219RP1L HTTP/1.1 Host: server.example.com Authorization: GNAP OS9M2PMHKUR64TB8N6BW7OZB8CDFONP219RP1LT0 Detached-JWS: eyj0.... If the token was issued to the RC identified by the key, the AS MUST invalidate the access token, if possible, and return an HTTP 204 response code. 204 No Content If the access token has expired, the AS SHOULD honor the revocation request to the token management URL as valid, since the end result is still the token not being usable. Though the AS MAY revoke an access token at any time for any reason, the token management function is specifically for the RC's use. 7. Using Access Tokens The method the RC uses to send an access token to the RS depends on the value of the "key" and "proof" parameters in the access token response (Section 3.2.1). If the key value is the boolean "false", the access token is a bearer token sent using the HTTP Header method defined in [RFC6750]. Authorization: Bearer OS9M2PMHKUR64TB8N6BW7OZB8CDFONP219RP1LT0 The form parameter and query parameter methods of [RFC6750] MUST NOT be used. If the "key" value is the boolean "true", the access token MUST be sent to the RS using the same key and proofing mechanism that the RC used in its initial request. If the "key" value is an object, the value of the "proof" field within the key indicates the particular proofing mechanism to use. The access token is sent using the HTTP authorization scheme "GNAP" along with a key proof as described in Section 8 for the key bound to the access token. For example, a "jwsd"-bound access token is sent as follows: Authorization: GNAP OS9M2PMHKUR64TB8N6BW7OZB8CDFONP219RP1LT0 Detached-JWS: eyj0.... Richer Expires 4 April 2021 [Page 64] Internet-Draft Grant Negotiation Access Protocol October 2020 [[ Editor's note: I don't actually like the idea of using only one header type for differently-bound access tokens. Perhaps instead these values should somehow reflect the key binding types. Maybe there can be multiple fields after the "GNAP" keyword using structured headers? Or a set of derived headers like GNAP-mtls? This might also be better as a separate specification, like it was in OAuth 2. However, access tokens should be able to use any key binding mechanisms here, plus bearer. ]] 8. Binding Keys Any keys presented by the RC to the AS or RS MUST be validated as part of the request in which they are presented. The type of binding used is indicated by the proof parameter of the key section in the initial request Section 2.3.2. Values defined by this specification are as follows: jwsd A detached JWS signature header jws Attached JWS payload mtls Mutual TLS certificate verification dpop OAuth Demonstration of Proof-of-Possession key proof header httpsig HTTP Signing signature header oauthpop OAuth PoP key proof authentication header Additional proofing methods are defined by a registry TBD (Section 12). All key binding methods used by this specification MUST cover all relevant portions of the request, including anything that would change the nature of the request, to allow for secure validation of the request by the AS. Relevant aspects include the URI being called, the HTTP method being used, any relevant HTTP headers and values, and the HTTP message body itself. The recipient of the signed message MUST validate all components of the signed message to ensure that nothing has been tampered with or substituted in a way that would change the nature of the request. When used in the GNAP delegation protocol, these key binding mechanisms allow the AS to ensure that the keys presented by the RC in the initial request are in control of the party calling any follow-up or continuation requests. To facilitate this requirement, all keys in the initial request Section 2.3.2 MUST be proved in all continuation requests Section 5 and token management requests Richer Expires 4 April 2021 [Page 65] Internet-Draft Grant Negotiation Access Protocol October 2020 Section 6. The AS MUST validate all keys presented by the RC (Section 2.3.2) or referenced in an ongoing request for each call within that request. [[ Editor's note: We are going to need a way for a client to rotate its keys securely, even while an ongoing grant is in effect. ]] 8.1. Detached JWS This method is indicated by "jwsd" in the "proof" field. A JWS [RFC7515] signature object is created as follows: The header of the JWS MUST contain the "kid" field of the key bound to this RC for this request. The JWS header MUST contain an "alg" field appropriate for the key identified by kid and MUST NOT be "none". To protect the request, the JWS header MUST contain the following additional fields. htm The HTTP Method used to make this request, as an uppercase ASCII string. htu The HTTP URI used for this request, including all path and query components. ts A timestamp of the request in integer seconds [[ Editor's note: It's not the usual practice to put additional information into the header of a JWS, but this keeps us from having to normalize the body serialization. Alternatively, we could add all these fields to the body of the request, but then it gets awkward for non-body requests like GET/DELETE. ]] The payload of the JWS object is the serialized body of the request, and the object is signed according to detached JWS [RFC7797]. The RC presents the signature in the Detached-JWS HTTP Header field. [[ Editor's Note: this is a custom header field, do we need this? ]] Richer Expires 4 April 2021 [Page 66] Internet-Draft Grant Negotiation Access Protocol October 2020 POST /tx HTTP/1.1 Host: server.example.com Content-Type: application/json Detached-JWS: eyJiNjQiOmZhbHNlLCJhbGciOiJSUzI1NiIsImtpZCI6Inh5ei0xIn0. .Y287HMtaY0EegEjoTd_04a4GC6qV48GgVbGKOhHdJnDtD0VuUlVjLfwne8AuUY3U7e8 9zUWwXLnAYK_BiS84M8EsrFvmv8yDLWzqveeIpcN5_ysveQnYt9Dqi32w6IOtAywkNUD ZeJEdc3z5s9Ei8qrYFN2fxcu28YS4e8e_cHTK57003WJu-wFn2TJUmAbHuqvUsyTb-nz YOKxuCKlqQItJF7E-cwSb_xULu-3f77BEU_vGbNYo5ZBa2B7UHO-kWNMSgbW2yeNNLbL C18Kv80GF22Y7SbZt0e2TwnR2Aa2zksuUbntQ5c7a1-gxtnXzuIKa34OekrnyqE1hmVW peQ { "resources": [ "dolphin-metadata" ], "interact": { "redirect": true, "callback": { "method": "redirect", "uri": "https://client.foo", "nonce": "VJLO6A4CAYLBXHTR0KRO" } }, "client": { "proof": "jwsd", "key": { "jwk": { "kty": "RSA", "e": "AQAB", "kid": "xyz-1", "alg": "RS256", "n": "kOB5rR4Jv0GMeLaY6_It_r3ORwdf8ci_JtffXyaSx8 xYJCNaOKNJn_Oz0YhdHbXTeWO5AoyspDWJbN5w_7bdWDxgpD-y6jnD1u9YhBOCWObNPF vpkTM8LC7SdXGRKx2k8Me2r_GssYlyRpqvpBlY5-ejCywKRBfctRcnhTTGNztbbDBUyD SWmFMVCHe5mXT4cL0BwrZC6S-uu-LAx06aKwQOPwYOGOslK8WPm1yGdkaA1uF_FpS6LS 63WYPHi_Ap2B7_8Wbw4ttzbMS_doJvuDagW8A1Ip3fXFAHtRAcKw7rdI4_Xln66hJxFe kpdfWdiPQddQ6Y1cK2U3obvUg7w" } } "display": { "name": "My Client Display Name", "uri": "https://example.net/client" }, } } Richer Expires 4 April 2021 [Page 67] Internet-Draft Grant Negotiation Access Protocol October 2020 When the server (AS or RS) receives the Detached-JWS header, it MUST parse its contents as a detached JWS object. The HTTP Body is used as the payload for purposes of validating the JWS, with no transformations. [[ Editor's note: this is a potentially fragile signature mechanism. It doesn't protect the method or URL of the request in the signature, but it's simple to calculate and useful for body-driven requests, like the client to the AS. We might want to remove this in favor of general-purpose HTTP signing. ]] 8.2. Attached JWS This method is indicated by "jwsd" in the "proof" field. A JWS [RFC7515] signature object is created as follows: The header of the JWS MUST contain the "kid" field of the key bound to this RC for this request. The JWS header MUST contain an "alg" field appropriate for the key identified by kid and MUST NOT be "none". To protect the request, the JWS header MUST contain the following additional fields. htm The HTTP Method used to make this request, as an uppercase ASCII string. htu The HTTP URI used for this request, including all path and query components. ts A timestamp of the request in integer seconds [[ Editor's note: It's not the usual practice to put additional information into the header of a JWS, but this keeps us from having to modify the body to use this signature method. Alternatively, we could add all these fields to the body of the request, but then it gets awkward for non-body requests like GET/DELETE. ]] The payload of the JWS object is the JSON serialized body of the request, and the object is signed according to JWS and serialized into compact form [RFC7515]. The RC presents the JWS as the body of the request along with a content type of "application/jose". The AS MUST extract the payload of the JWS and treat it as the request body for further processing. Richer Expires 4 April 2021 [Page 68] Internet-Draft Grant Negotiation Access Protocol October 2020 POST /tx HTTP/1.1 Host: server.example.com Content-Type: application/jose eyJiNjQiOmZhbHNlLCJhbGciOiJSUzI1NiIsImtpZCI6Inh5ei0xIn0.ewogICAgIm NsaWVudCI6IHsKICAgICAgICAibmFtZSI6ICJNeSBDbGllbnQgRGlzcGxheSBOYW1l IiwKICAgICAgICAidXJpIjogImh0dHBzOi8vZXhhbXBsZS5uZXQvY2xpZW50IgogIC AgfSwKICAgICJyZXNvdXJjZXMiOiBbCiAgICAgICAgImRvbHBoaW4tbWV0YWRhdGEi CiAgICBdLAogICAgImludGVyYWN0IjogewogICAgICAgICJyZWRpcmVjdCI6IHRydW UsCiAgICAgICAgImNhbGxiYWNrIjogewogICAgCQkidXJpIjogImh0dHBzOi8vY2xp ZW50LmZvbyIsCiAgICAJCSJub25jZSI6ICJWSkxPNkE0Q0FZTEJYSFRSMEtSTyIKIC AgIAl9CiAgICB9LAogICAgImtleXMiOiB7CgkJInByb29mIjogImp3c2QiLAogICAg ICAgICJqd2tzIjogewogICAgICAgICAgICAia2V5cyI6IFsKICAgICAgICAgICAgIC AgIHsKICAgICAgICAgICAgICAgICAgICAia3R5IjogIlJTQSIsCiAgICAgICAgICAg ICAgICAgICAgImUiOiAiQVFBQiIsCiAgICAgICAgICAgICAgICAgICAgImtpZCI6IC J4eXotMSIsCiAgICAgICAgICAgICAgICAgICAgImFsZyI6ICJSUzI1NiIsCiAgICAg ICAgICAgICAgICAgICAgIm4iOiAia09CNXJSNEp2MEdNZUxhWTZfSXRfcjNPUndkZj hjaV9KdGZmWHlhU3g4eFlKQ0NOYU9LTkpuX096MFloZEhiWFRlV081QW95c3BEV0pi TjV3XzdiZFdEeGdwRC15NmpuRDF1OVloQk9DV09iTlBGdnBrVE04TEM3U2RYR1JLeD JrOE1lMnJfR3NzWWx5UnBxdnBCbFk1LWVqQ3l3S1JCZmN0UmNuaFRUR056dGJiREJV eURTV21GTVZDSGU1bVhUNGNMMEJ3clpDNlMtdXUtTEF4MDZhS3dRT1B3WU9HT3NsSz hXUG0xeUdka2FBMXVGX0ZwUzZMUzYzV1lQSGlfQXAyQjdfOFdidzR0dHpiTVNfZG9K dnVEYWdXOEExSXAzZlhGQUh0UkFjS3c3cmRJNF9YbG42NmhKeEZla3BkZldkaVBRZG RRNlkxY0syVTNvYnZVZzd3IgogICAgICAgICAgICAgICAgfQogICAgICAgICAgICBd CiAgICAgICAgfQogICAgfQp9.Y287HMtaY0EegEjoTd_04a4GC6qV48GgVbGKOhHdJ nDtD0VuUlVjLfwne8AuUY3U7e89zUWwXLnAYK_BiS84M8EsrFvmv8yDLWzqveeIpcN 5_ysveQnYt9Dqi32w6IOtAywkNUDZeJEdc3z5s9Ei8qrYFN2fxcu28YS4e8e_cHTK5 7003WJu-wFn2TJUmAbHuqvUsyTb-nzYOKxuCKlqQItJF7E-cwSb_xULu-3f77BEU_v GbNYo5ZBa2B7UHO-kWNMSgbW2yeNNLbLC18Kv80GF22Y7SbZt0e2TwnR2Aa2zksuUb ntQ5c7a1-gxtnXzuIKa34OekrnyqE1hmVWpeQ [[ Editor's note: A downside to this method is that it requires the content type to be something other than application/json, and it doesn't work against an RS without additional profiling since it requires things to be sent in the body - you'd need to specify different delivery locations for a GET vs. a POST, for example. Additionally it is potentially fragile like a detached JWS since a multi-tier system could parse the payload and pass the parsed payload downstream with potential transformations. We might want to remove this in favor of general-purpose HTTP signing. ]] Richer Expires 4 April 2021 [Page 69] Internet-Draft Grant Negotiation Access Protocol October 2020 8.3. Mutual TLS This method is indicated by "mtls" in the "proof" field. The RC presents its client certificate during TLS negotiation with the server (either AS or RS). The AS or RS takes the thumbprint of the client certificate presented during mutual TLS negotiation and compares that thumbprint to the thumbprint presented by the RC application as described in [RFC8705] section 3. POST /tx HTTP/1.1 Host: server.example.com Content-Type: application/json SSL_CLIENT_CERT: MIIEHDCCAwSgAwIBAgIBATANBgkqhkiG9w0BAQsFADCBmjE3MDUGA1UEAwwuQmVz cG9rZSBFbmdpbmVlcmluZyBSb290IENlcnRpZmljYXRlIEF1dGhvcml0eTELMAkG A1UECAwCTUExCzAJBgNVBAYTAlVTMRkwFwYJKoZIhvcNAQkBFgpjYUBic3BrLmlv MRwwGgYDVQQKDBNCZXNwb2tlIEVuZ2luZWVyaW5nMQwwCgYDVQQLDANNVEkwHhcN MTkwNDEwMjE0MDI5WhcNMjQwNDA4MjE0MDI5WjB8MRIwEAYDVQQDDAlsb2NhbGhv c3QxCzAJBgNVBAgMAk1BMQswCQYDVQQGEwJVUzEgMB4GCSqGSIb3DQEJARYRdGxz Y2xpZW50QGJzcGsuaW8xHDAaBgNVBAoME0Jlc3Bva2UgRW5naW5lZXJpbmcxDDAK BgNVBAsMA01USTCCASIwDQYJKoZIhvcNAQEBBQADggEPADCCAQoCggEBAMmaXQHb s/wc1RpsQ6Orzf6rN+q2ijaZbQxD8oi+XaaN0P/gnE13JqQduvdq77OmJ4bQLokq sd0BexnI07Njsl8nkDDYpe8rNve5TjyUDCfbwgS7U1CluYenXmNQbaYNDOmCdHww UjV4kKREg6DGAx22Oq7+VHPTeeFgyw4kQgWRSfDENWY3KUXJlb/vKR6lQ+aOJytk vj8kVZQtWupPbvwoJe0na/ISNAOhL74w20DWWoDKoNltXsEtflNljVoi5nqsmZQc jfjt6LO0T7O1OX3Cwu2xWx8KZ3n/2ocuRqKEJHqUGfeDtuQNt6Jz79v/OTr8puLW aD+uyk6NbtGjoQsCAwEAAaOBiTCBhjAJBgNVHRMEAjAAMAsGA1UdDwQEAwIF4DBs BgNVHREEZTBjgglsb2NhbGhvc3SCD3Rsc2NsaWVudC5sb2NhbIcEwKgBBIERdGxz Y2xpZW50QGJzcGsuaW+GF2h0dHA6Ly90bHNjbGllbnQubG9jYWwvhhNzc2g6dGxz Y2xpZW50LmxvY2FsMA0GCSqGSIb3DQEBCwUAA4IBAQCKKv8WlLrT4Z5NazaUrYtl TF+2v0tvZBQ7qzJQjlOqAcvxry/d2zyhiRCRS/v318YCJBEv4Iq2W3I3JMMyAYEe 2573HzT7rH3xQP12yZyRQnetdiVM1Z1KaXwfrPDLs72hUeELtxIcfZ0M085jLboX hufHI6kqm3NCyCCTihe2ck5RmCc5l2KBO/vAHF0ihhFOOOby1v6qbPHQcxAU6rEb 907/p6BW/LV1NCgYB1QtFSfGxowqb9FRIMD2kvMSmO0EMxgwZ6k6spa+jk0IsI3k lwLW9b+Tfn/daUbIDctxeJneq2anQyU2znBgQl6KILDSF4eaOqlBut/KNZHHazJh { "resources": [ "dolphin-metadata" ], "interact": { "redirect": true, "callback": { "method": "redirect", "uri": "https://client.foo", "nonce": "VJLO6A4CAYLBXHTR0KRO" } }, "client": { Richer Expires 4 April 2021 [Page 70] Internet-Draft Grant Negotiation Access Protocol October 2020 "proof": "mtls", "display": { "name": "My Client Display Name", "uri": "https://example.net/client" }, "key": { "cert": "MIIEHDCCAwSgAwIBAgIBATANBgkqhkiG9w0BAQsFADCBmjE3 MDUGA1UEAwwuQmVzcG9rZSBFbmdpbmVlcmluZyBSb290IENlcnRpZmljYXRlIEF1d Ghvcml0eTELMAkGA1UECAwCTUExCzAJBgNVBAYTAlVTMRkwFwYJKoZIhvcNAQkBFg pjYUBic3BrLmlvMRwwGgYDVQQKDBNCZXNwb2tlIEVuZ2luZWVyaW5nMQwwCgYDVQQ LDANNVEkwHhcNMTkwNDEwMjE0MDI5WhcNMjQwNDA4MjE0MDI5WjB8MRIwEAYDVQQD DAlsb2NhbGhvc3QxCzAJBgNVBAgMAk1BMQswCQYDVQQGEwJVUzEgMB4GCSqGSIb3D QEJARYRdGxzY2xpZW50QGJzcGsuaW8xHDAaBgNVBAoME0Jlc3Bva2UgRW5naW5lZX JpbmcxDDAKBgNVBAsMA01USTCCASIwDQYJKoZIhvcNAQEBBQADggEPADCCAQoCggE BAMmaXQHbs/wc1RpsQ6Orzf6rN+q2ijaZbQxD8oi+XaaN0P/gnE13JqQduvdq77Om J4bQLokqsd0BexnI07Njsl8nkDDYpe8rNve5TjyUDCfbwgS7U1CluYenXmNQbaYND OmCdHwwUjV4kKREg6DGAx22Oq7+VHPTeeFgyw4kQgWRSfDENWY3KUXJlb/vKR6lQ+ aOJytkvj8kVZQtWupPbvwoJe0na/ISNAOhL74w20DWWoDKoNltXsEtflNljVoi5nq smZQcjfjt6LO0T7O1OX3Cwu2xWx8KZ3n/2ocuRqKEJHqUGfeDtuQNt6Jz79v/OTr8 puLWaD+uyk6NbtGjoQsCAwEAAaOBiTCBhjAJBgNVHRMEAjAAMAsGA1UdDwQEAwIF4 DBsBgNVHREEZTBjgglsb2NhbGhvc3SCD3Rsc2NsaWVudC5sb2NhbIcEwKgBBIERdG xzY2xpZW50QGJzcGsuaW+GF2h0dHA6Ly90bHNjbGllbnQubG9jYWwvhhNzc2g6dGx zY2xpZW50LmxvY2FsMA0GCSqGSIb3DQEBCwUAA4IBAQCKKv8WlLrT4Z5NazaUrYtl TF+2v0tvZBQ7qzJQjlOqAcvxry/d2zyhiRCRS/v318YCJBEv4Iq2W3I3JMMyAYEe2 573HzT7rH3xQP12yZyRQnetdiVM1Z1KaXwfrPDLs72hUeELtxIcfZ0M085jLboXhu fHI6kqm3NCyCCTihe2ck5RmCc5l2KBO/vAHF0ihhFOOOby1v6qbPHQcxAU6rEb907 /p6BW/LV1NCgYB1QtFSfGxowqb9FRIMD2kvMSmO0EMxgwZ6k6spa+jk0IsI3klwLW 9b+Tfn/daUbIDctxeJneq2anQyU2znBgQl6KILDSF4eaOqlBut/KNZHHazJh" } } [[ Editor's note: ]] 8.4. DPoP This method is indicated by "dpop" in the "proof" field. The RC creates a Demonstration of Proof-of-Possession signature header as described in [I-D.ietf-oauth-dpop] section 2. In addition to the required fields, the DPoP body MUST also contain a digest of the request body: digest Digest of the request body as the value of the Digest header defined in [RFC3230]. Richer Expires 4 April 2021 [Page 71] Internet-Draft Grant Negotiation Access Protocol October 2020 POST /tx HTTP/1.1 Host: server.example.com Content-Type: application/json DPoP: eyJ0eXAiOiJkcG9wK2p3dCIsImFsZyI6IlJTMjU2IiwiandrIjp7Imt0eSI6Il JTQSIsImUiOiJBUUFCIiwia2lkIjoieHl6LWNsaWVudCIsImFsZyI6IlJTMjU2Iiwibi I6Inp3Q1RfM2J4LWdsYmJIcmhlWXBZcFJXaVk5SS1uRWFNUnBablJySWpDczZiX2VteV RrQmtEREVqU3lzaTM4T0M3M2hqMS1XZ3hjUGRLTkdaeUlvSDNRWmVuMU1LeXloUXBMSk cxLW9MTkxxbTdwWFh0ZFl6U2RDOU8zLW9peXk4eWtPNFlVeU5aclJSZlBjaWhkUUNiT1 9PQzhRdWdtZzlyZ05ET1NxcHBkYU5lYXMxb3Y5UHhZdnhxcnoxLThIYTdna0QwMFlFQ1 hIYUIwNXVNYVVhZEhxLU9fV0l2WVhpY2c2STVqNlM0NFZOVTY1VkJ3dS1BbHluVHhRZE 1BV1AzYll4VlZ5NnAzLTdlVEpva3ZqWVRGcWdEVkRaOGxVWGJyNXlDVG5SaG5oSmd2Zj NWakRfbWFsTmU4LXRPcUs1T1NEbEhUeTZnRDlOcWRHQ20tUG0zUSJ9fQ.eyJodHRwX21 ldGhvZCI6IlBPU1QiLCJodHRwX3VyaSI6Imh0dHA6XC9cL2hvc3QuZG9ja2VyLmludGV ybmFsOjk4MzRcL2FwaVwvYXNcL3RyYW5zYWN0aW9uIiwiaWF0IjoxNTcyNjQyNjEzLCJ qdGkiOiJIam9IcmpnbTJ5QjR4N2pBNXl5RyJ9.aUhftvfw2NoW3M7durkopReTvONng1 fOzbWjAlKNSLL0qIwDgfG39XUyNvwQ23OBIwe6IuvTQ2UBBPklPAfJhDTKd8KHEAfidN B-LzUOzhDetLg30yLFzIpcEBMLCjb0TEsmXadvxuNkEzFRL-Q-QCg0AXSF1h57eAqZV8 SYF4CQK9OUV6fIWwxLDd3cVTx83MgyCNnvFlG_HDyim1Xx-rxV4ePd1vgDeRubFb6QWj iKEO7vj1APv32dsux67gZYiUpjm0wEZprjlG0a07R984KLeK1XPjXgViEwEdlirUmpVy T9tyEYqGrTfm5uautELgMls9sgSyE929woZ59elg { "resources": [ "dolphin-metadata" ], "interact": { "redirect": true, "callback": { "method": "redirect", "uri": "https://client.foo", "nonce": "VJLO6A4CAYLBXHTR0KRO" } }, "client": { "display": { "name": "My Client Display Name", "uri": "https://example.net/client" }, "proof": "dpop", "key": { "jwk": { "kty": "RSA", "e": "AQAB", "kid": "xyz-1", "alg": "RS256", "n": "kOB5rR4Jv0GMeLaY6_It_r3ORwdf8ci_JtffXyaSx8xYJ CCNaOKNJn_Oz0YhdHbXTeWO5AoyspDWJbN5w_7bdWDxgpD-y6jnD1u9YhBOCWObNPFvpkTM 8LC7SdXGRKx2k8Me2r_GssYlyRpqvpBlY5-ejCywKRBfctRcnhTTGNztbbDBUyDSWmFMVCH Richer Expires 4 April 2021 [Page 72] Internet-Draft Grant Negotiation Access Protocol October 2020 e5mXT4cL0BwrZC6S-uu-LAx06aKwQOPwYOGOslK8WPm1yGdkaA1uF_FpS6LS63WYPHi_Ap2 B7_8Wbw4ttzbMS_doJvuDagW8A1Ip3fXFAHtRAcKw7rdI4_Xln66hJxFekpdfWdiPQddQ6Y 1cK2U3obvUg7w" } } } } [[ Editor's note: this method requires duplication of the key in the header and the request body, which is redundant and potentially awkward. The signature also doesn't protect the body of the request. ]] 8.5. HTTP Signing This method is indicated by "httpsig" in the "proof" field. The RC creates an HTTP Signature header as described in [I-D.ietf-httpbis-message-signatures] section 4. The RC MUST calculate and present the Digest header as defined in [RFC3230] and include this header in the signature. POST /tx HTTP/1.1 Host: server.example.com Content-Type: application/json Content-Length: 716 Signature: keyId="xyz-client", algorithm="rsa-sha256", headers="(request-target) digest content-length", signature="TkehmgK7GD/z4jGkmcHS67cjVRgm3zVQNlNrrXW32Wv7d u0VNEIVI/dMhe0WlHC93NP3ms91i2WOW5r5B6qow6TNx/82/6W84p5jqF YuYfTkKYZ69GbfqXkYV9gaT++dl5kvZQjVk+KZT1dzpAzv8hdk9nO87Xi rj7qe2mdAGE1LLc3YvXwNxuCQh82sa5rXHqtNT1077fiDvSVYeced0UEm rWwErVgr7sijtbTohC4FJLuJ0nG/KJUcIG/FTchW9rd6dHoBnY43+3Dzj CIthXpdH5u4VX3TBe6GJDO6Mkzc6vB+67OWzPwhYTplUiFFV6UZCsDEeu Sa/Ue1yLEAMg=="]} Digest: SHA=oZz2O3kg5SEFAhmr0xEBbc4jEfo= { "resources": [ "dolphin-metadata" ], "interact": { "redirect": true, "callback": { "method": "push", "uri": "https://client.foo", "nonce": "VJLO6A4CAYLBXHTR0KRO" } }, Richer Expires 4 April 2021 [Page 73] Internet-Draft Grant Negotiation Access Protocol October 2020 "client": { "display": { "name": "My Client Display Name", "uri": "https://example.net/client" }, "proof": "httpsig", "key": { "jwk": { "kty": "RSA", "e": "AQAB", "kid": "xyz-1", "alg": "RS256", "n": "kOB5rR4Jv0GMeLaY6_It_r3ORwdf8ci_J tffXyaSx8xYJCCNaOKNJn_Oz0YhdHbXTeWO5AoyspDWJbN5w_7bdWDxgpD- y6jnD1u9YhBOCWObNPFvpkTM8LC7SdXGRKx2k8Me2r_GssYlyRpqvpBlY5- ejCywKRBfctRcnhTTGNztbbDBUyDSWmFMVCHe5mXT4cL0BwrZC6S-uu-LAx 06aKwQOPwYOGOslK8WPm1yGdkaA1uF_FpS6LS63WYPHi_Ap2B7_8Wbw4ttz bMS_doJvuDagW8A1Ip3fXFAHtRAcKw7rdI4_Xln66hJxFekpdfWdiPQddQ6 Y1cK2U3obvUg7w" } } } } When used to present an access token as in Section 7, the Authorization header MUST be included in the signature. 8.6. OAuth PoP This method is indicated by "oauthpop" in the "proof" field. The RC creates an HTTP Authorization PoP header as described in [I-D.ietf-oauth-signed-http-request] section 4, with the following additional requirements: * The at (access token) field MUST be omitted unless this method is being used in conjunction with an access token as in Section 7. [[ Editor's note: this is in contradiction to the referenced spec which makes this field mandatory. ]] * The b (body hash) field MUST be calculated and supplied * All components of the URL MUST be calculated and supplied * The m (method) field MUST be supplied Richer Expires 4 April 2021 [Page 74] Internet-Draft Grant Negotiation Access Protocol October 2020 POST /tx HTTP/1.1 Host: server.example.com Content-Type: application/json PoP: eyJhbGciOiJSUzI1NiIsImp3ayI6eyJrdHkiOiJSU0EiLCJlIjoi QVFBQiIsImtpZCI6Inh5ei1jbGllbnQiLCJhbGciOiJSUzI1NiIsIm4iO iJ6d0NUXzNieC1nbGJiSHJoZVlwWXBSV2lZOUktbkVhTVJwWm5ScklqQ3 M2Yl9lbXlUa0JrRERFalN5c2kzOE9DNzNoajEtV2d4Y1BkS05HWnlJb0g zUVplbjFNS3l5aFFwTEpHMS1vTE5McW03cFhYdGRZelNkQzlPMy1vaXl5 OHlrTzRZVXlOWnJSUmZQY2loZFFDYk9fT0M4UXVnbWc5cmdORE9TcXBwZ GFOZWFzMW92OVB4WXZ4cXJ6MS04SGE3Z2tEMDBZRUNYSGFCMDV1TWFVYW RIcS1PX1dJdllYaWNnNkk1ajZTNDRWTlU2NVZCd3UtQWx5blR4UWRNQVd QM2JZeFZWeTZwMy03ZVRKb2t2allURnFnRFZEWjhsVVhicjV5Q1RuUmhu aEpndmYzVmpEX21hbE5lOC10T3FLNU9TRGxIVHk2Z0Q5TnFkR0NtLVBtM 1EifX0.eyJwIjoiXC9hcGlcL2FzXC90cmFuc2FjdGlvbiIsImIiOiJxa0 lPYkdOeERhZVBTZnc3NnFjamtqSXNFRmxDb3g5bTU5NFM0M0RkU0xBIiw idSI6Imhvc3QuZG9ja2VyLmludGVybmFsIiwiaCI6W1siQWNjZXB0Iiwi Q29udGVudC1UeXBlIiwiQ29udGVudC1MZW5ndGgiXSwiVjQ2OUhFWGx6S k9kQTZmQU5oMmpKdFhTd3pjSGRqMUloOGk5M0h3bEVHYyJdLCJtIjoiUE 9TVCIsInRzIjoxNTcyNjQyNjEwfQ.xyQ47qy8bu4fyK1T3Ru1Sway8wp6 5rfAKnTQQU92AUUU07I2iKoBL2tipBcNCC5zLH5j_WUyjlN15oi_lLHym fPdzihtt8_Jibjfjib5J15UlifakjQ0rHX04tPal9PvcjwnyZHFcKn-So Y3wsARn-gGwxpzbsPhiKQP70d2eG0CYQMA6rTLslT7GgdQheelhVFW29i 27NcvqtkJmiAG6Swrq4uUgCY3zRotROkJ13qo86t2DXklV-eES4-2dCxf cWFkzBAr6oC4Qp7HnY_5UT6IWkRJt3efwYprWcYouOVjtRan3kEtWkaWr G0J4bPVnTI5St9hJYvvh7FE8JirIg { "resources": [ "dolphin-metadata" ], "interact": { "redirect": true, "callback": { "method": "redirect", "uri": "https://client.foo", "nonce": "VJLO6A4CAYLBXHTR0KRO" } }, "client": { "display": { "name": "My Client Display Name", "uri": "https://example.net/client" }, "proof": "oauthpop", "key": { "jwk": { "kty": "RSA", "e": "AQAB", Richer Expires 4 April 2021 [Page 75] Internet-Draft Grant Negotiation Access Protocol October 2020 "kid": "xyz-1", "alg": "RS256", "n": "kOB5rR4Jv0GMeLaY6_It_r3ORwdf8ci_J tffXyaSx8xYJCCNaOKNJn_Oz0YhdHbXTeWO5AoyspDWJbN5w_7bdWDxgpD- y6jnD1u9YhBOCWObNPFvpkTM8LC7SdXGRKx2k8Me2r_GssYlyRpqvpBlY5- ejCywKRBfctRcnhTTGNztbbDBUyDSWmFMVCHe5mXT4cL0BwrZC6S-uu-LAx 06aKwQOPwYOGOslK8WPm1yGdkaA1uF_FpS6LS63WYPHi_Ap2B7_8Wbw4ttz bMS_doJvuDagW8A1Ip3fXFAHtRAcKw7rdI4_Xln66hJxFekpdfWdiPQddQ6 Y1cK2U3obvUg7w" } } } } [[ Editor's note: This is a stale draft from the OAuth working group, but it does at least provide some basic functionality for protecting HTTP messages with a signature. This work is likely to be subsumed by the general-purpose HTTP message signature mechanism in Section 8.5. ]] 9. Discovery By design, the protocol minimizes the need for any pre-flight discovery. To begin a request, the RC only needs to know the endpoint of the AS and which keys it will use to sign the request. Everything else can be negotiated dynamically in the course of the protocol. However, the AS can have limits on its allowed functionality. If the RC wants to optimize its calls to the AS before making a request, it MAY send an HTTP OPTIONS request to the grant request endpoint to retrieve the server's discovery information. The AS MUST respond with a JSON document containing the following information: grant_request_endpoint REQUIRED. The full URL of the AS's grant request endpoint. This MUST match the URL the RC used to make the discovery request. capabilities OPTIONAL. A list of the AS's capabilities. The values of this result MAY be used by the RC in the capabilities section (Section 2.6) of the request. interaction_methods OPTIONAL. A list of the AS's interaction methods. The values of this list correspond to the possible fields in the interaction section (Section 2.5) of the request. key_proofs OPTIONAL. A list of the AS's supported key proofing Richer Expires 4 April 2021 [Page 76] Internet-Draft Grant Negotiation Access Protocol October 2020 mechanisms. The values of this list correspond to possible values of the "proof" field of the key section (Section 2.3.2) of the request. sub_ids OPTIONAL. A list of the AS's supported identifiers. The values of this list correspond to possible values of the subject identifier section (Section 2.2) of the request. assertions OPTIONAL. A list of the AS's supported assertion formats. The values of this list correspond to possible values of the subject assertion section (Section 2.2) of the request. The information returned from this method is for optimization purposes only. The AS MAY deny any request, or any portion of a request, even if it lists a capability as supported. For example, a given RC can be registered with the "mtls" key proofing mechanism, but the AS also returns other proofing methods, then the AS will deny a request from that RC using a different proofing mechanism. 10. Resource Servers In some deployments, a resource server will need to be able to call the AS for a number of functions. [[ Editor's note: This section is for discussion of possible advanced functionality. It seems like it should be a separate document or set of documents, and it's not even close to being well-baked. This also adds additional endpoints to the AS, as this is separate from the token request process, and therefore would require RS-facing discovery or configuration information to make it work. Also-also, it does presume the RS can sign requests in the same way that a client does, but hopefully we can be more consistent with this than RFC7662 was able to do. ]] 10.1. Introspecting a Token When the RS receives an access token, it can call the introspection endpoint at the AS to get token information. [[ Editor's note: this isn't super different from the token management URIs, but the RS has no way to get that URI, and it's bound to the RS's keys instead of the RC's or token's keys. ]] Richer Expires 4 April 2021 [Page 77] Internet-Draft Grant Negotiation Access Protocol October 2020 +------+ +------+ +------+ | RC |--(1)->| RS | | AS | | | | |--(2)->| | | | | |<-(3)--| | | | | | +------+ | |<-(4)--| | +------+ +------+ 1. The RC calls the RS with its access token. 2. The RS introspects the access token value at the AS. The RS signs the request with its own key (not the RC's key or the token's key). 3. The AS validates the token value and the RC's request and returns the introspection response for the token. 4. The RS fulfills the request from the RC. The RS signs the request with its own key and sends the access token as the body of the request. POST /introspect HTTP/1.1 Host: server.example.com Content-type: application/json Detached-JWS: ejy0... { "access_token": "OS9M2PMHKUR64TB8N6BW7OZB8CDFONP219RP1LT0", } The AS responds with a data structure describing the token's current state and any information the RS would need to validate the token's presentation, such as its intended proofing mechanism and key material. Richer Expires 4 April 2021 [Page 78] Internet-Draft Grant Negotiation Access Protocol October 2020 Content-type: application/json { "active": true, "resources": [ "dolphin-metadata", "some other thing" ], "client": { "key": { "proof": "httpsig", "jwk": { "kty": "RSA", "e": "AQAB", "kid": "xyz-1", "alg": "RS256", "n": "kOB5rR4Jv0GMeL...." } } } } 10.2. Deriving a downstream token Some architectures require an RS to act as an RC and request a derived access token for a secondary RS. This internal token is issued in the context of the incoming access token. +------+ +-------+ +------+ +-------+ | RC |--(1)->| RS1 | | AS | | RS2 | | | | |--(2)->| | | | | | | |<-(3)--| | | | | | | | +------+ | | | | | | | | | | | |-----------(4)------->| | | | | |<----------(5)--------| | | |<-(6)--| | | | +------+ +-------+ +-------+ 1. The RC calls RS1 with an access token. 2. RS1 presents that token to the AS to get a derived token for use at RS2. RS1 indicates that it has no ability to interact with the RO. RS1 signs its request with its own key, not the token's key or the RC's key. 3. The AS returns a derived token to RS1 for use at RS2. 4. RS1 calls RS2 with the token from (3). Richer Expires 4 April 2021 [Page 79] Internet-Draft Grant Negotiation Access Protocol October 2020 5. RS2 fulfills the call from RS1. 6. RS1 fulfills the call from RC. If the RS needs to derive a token from one presented to it, it can request one from the AS by making a token request as described in Section 2 and presenting the existing access token's value in the "existing_access_token" field. The RS MUST identify itself with its own key and sign the request. [[ Editor's note: this is similar to Section 2.7 but based on the access token and not the grant. We might be able to re-use that function: the fact that the keys presented are not the ones used for the access token should indicate that it's a different party and a different kind of request, but there might be some subtle security issues there. ]] POST /tx HTTP/1.1 Host: server.example.com Content-type: application/json Detached-JWS: ejy0... { "resources": [ { "actions": [ "read", "write", "dolphin" ], "locations": [ "https://server.example.net/", "https://resource.local/other" ], "datatypes": [ "metadata", "images" ] }, "dolphin-metadata" ], "client": "7C7C4AZ9KHRS6X63AJAO", "existing_access_token": "OS9M2PMHKUR64TB8N6BW7OZB8CDFONP219RP1LT0" } The AS responds with a token as described in Section 3. Richer Expires 4 April 2021 [Page 80] Internet-Draft Grant Negotiation Access Protocol October 2020 10.3. Registering a Resource Handle If the RS needs to, it can post a set of resources as described in Section 2.1.1 to the AS's resource registration endpoint. The RS MUST identify itself with its own key and sign the request. POST /resource HTTP/1.1 Host: server.example.com Content-type: application/json Detached-JWS: ejy0... { "resources": [ { "actions": [ "read", "write", "dolphin" ], "locations": [ "https://server.example.net/", "https://resource.local/other" ], "datatypes": [ "metadata", "images" ] }, "dolphin-metadata" ], "client": "7C7C4AZ9KHRS6X63AJAO" } The AS responds with a handle appropriate to represent the resources list that the RS presented. Content-type: application/json { "resource_handle": "FWWIKYBQ6U56NL1" } The RS MAY make this handle available as part of a response (Section 10.4) or as documentation to developers. Richer Expires 4 April 2021 [Page 81] Internet-Draft Grant Negotiation Access Protocol October 2020 [[ Editor's note: It's not an exact match here because the "resource_handle" returned now represents a collection of objects instead of a single one. Perhaps we should let this return a list of strings instead? Or use a different syntax than the resource request? Also, this borrows heavily from UMA 2's "distributed authorization" model and, like UMA, might be better suited to an extension than the core protocol. ]] 10.4. Requesting a Resources With Insufficient Access If the RC calls an RS without an access token, or with an invalid access token, the RS MAY respond to the RC with an authentication header indicating that GNAP. The address of the GNAP endpoint MUST be sent in the "as_uri" parameter. The RS MAY additionally return a resource reference that the RC MAY use in its resource request (Section 2.1). This resource reference handle SHOULD be sufficient for at least the action the RC was attempting to take at the RS. The RS MAY use the dynamic resource handle request (Section 10.3) to register a new resource handle, or use a handle that has been pre- configured to represent what the AS is protecting. The content of this handle is opaque to the RS and the RC. WWW-Authenticate: GNAP as_uri=http://server.example/tx,resource=FWWIKYBQ6U56NL1 The RC then makes a call to the "as_uri" as described in Section 2, with the value of "resource" as one of the members of a "resources" array Section 2.1.1. The RC MAY request additional resources and other information, and MAY request multiple access tokens. [[ Editor's note: this borrows heavily from UMA 2's "distributed authorization" model and, like UMA, might be better suited to an extension than the core protocol. ]] 11. Acknowledgements The author would like to thank the feedback of the following individuals for their reviews, implementations, and contributions: Aaron Parecki, Annabelle Backman, Dick Hardt, Dmitri Zagidulin, Dmitry Barinov, Fabien Imbault, Francis Pouatcha, George Fletcher, Haardik Haardik, Hamid Massaoud, Jacky Yuan, Joseph Heenan, Kathleen Moriarty, Mike Jones, Mike Varley, Nat Sakimura, Takahiko Kawasaki, Takahiro Tsuchiya. Richer Expires 4 April 2021 [Page 82] Internet-Draft Grant Negotiation Access Protocol October 2020 In particular, the author would like to thank Aaron Parecki and Mike Jones for insights into how to integrate identity and authentication systems into the core protocol, and to Dick Hardt for the use cases, diagrams, and insights provided in the XAuth proposal that have been incorporated here. The author would like to especially thank Mike Varley and the team at SecureKey for feedback and development of early versions of the XYZ protocol that fed into this standards work. 12. IANA Considerations [[ TBD: There are a lot of items in the document that are expandable through the use of value registries. ]] 13. Security Considerations [[ TBD: There are a lot of security considerations to add. ]] All requests have to be over TLS or equivalent as per [BCP195]. Many handles act as shared secrets, though they can be combined with a requirement to provide proof of a key as well. 14. Privacy Considerations [[ TBD: There are a lot of privacy considerations to add. ]] Handles are passed between parties and therefore should not contain any private data. When user information is passed to the RC, the AS needs to make sure that it has the permission to do so. 15. Normative References [BCP195] "Recommendations for Secure Use of Transport Layer Security (TLS) and Datagram Transport Layer Security (DTLS)", 2015, <http://www.rfc-editor.org/info/bcp195>. [I-D.ietf-httpbis-message-signatures] Backman, A., Richer, J., and M. Sporny, "Signing HTTP Messages", Work in Progress, Internet-Draft, draft-ietf- httpbis-message-signatures-00, 10 April 2020, <http://www.ietf.org/internet-drafts/draft-ietf-httpbis- message-signatures-00.txt>. [I-D.ietf-oauth-dpop] Fett, D., Campbell, B., Bradley, J., Lodderstedt, T., Jones, M., and D. Waite, "OAuth 2.0 Demonstration of Proof-of-Possession at the Application Layer (DPoP)", Work Richer Expires 4 April 2021 [Page 83] Internet-Draft Grant Negotiation Access Protocol October 2020 in Progress, Internet-Draft, draft-ietf-oauth-dpop-01, 1 May 2020, <http://www.ietf.org/internet-drafts/draft-ietf- oauth-dpop-01.txt>. [I-D.ietf-oauth-signed-http-request] Richer, J., Bradley, J., and H. Tschofenig, "A Method for Signing HTTP Requests for OAuth", Work in Progress, Internet-Draft, draft-ietf-oauth-signed-http-request-03, 8 August 2016, <http://www.ietf.org/internet-drafts/draft- ietf-oauth-signed-http-request-03.txt>. [I-D.ietf-secevent-subject-identifiers] Backman, A. and M. Scurtescu, "Subject Identifiers for Security Event Tokens", Work in Progress, Internet-Draft, draft-ietf-secevent-subject-identifiers-06, 4 September 2020, <http://www.ietf.org/internet-drafts/draft-ietf- secevent-subject-identifiers-06.txt>. [OIDC] Sakimura, N., Bradley, J., Jones, M., de Medeiros, B., and C. Mortimore, "OpenID Connect Core 1.0 incorporating errata set 1", November 2014, <https://openiD.net/specs/openiD-connect-core-1_0.html>. [OIDC4IA] Lodderstedt, T. and D. Fett, "OpenID Connect for Identity Assurance 1.0", October 2019, <https://openid.net/specs/ openid-connect-4-identity-assurance-1_0.html>. [RFC2119] Bradner, S., "Key words for use in RFCs to Indicate Requirement Levels", BCP 14, RFC 2119, DOI 10.17487/RFC2119, March 1997, <https://www.rfc-editor.org/info/rfc2119>. [RFC3230] Mogul, J. and A. Van Hoff, "Instance Digests in HTTP", RFC 3230, DOI 10.17487/RFC3230, January 2002, <https://www.rfc-editor.org/info/rfc3230>. [RFC5646] Phillips, A., Ed. and M. Davis, Ed., "Tags for Identifying Languages", BCP 47, RFC 5646, DOI 10.17487/RFC5646, September 2009, <https://www.rfc-editor.org/info/rfc5646>. [RFC6749] Hardt, D., Ed., "The OAuth 2.0 Authorization Framework", RFC 6749, DOI 10.17487/RFC6749, October 2012, <https://www.rfc-editor.org/info/rfc6749>. [RFC6750] Jones, M. and D. Hardt, "The OAuth 2.0 Authorization Framework: Bearer Token Usage", RFC 6750, DOI 10.17487/RFC6750, October 2012, <https://www.rfc-editor.org/info/rfc6750>. Richer Expires 4 April 2021 [Page 84] Internet-Draft Grant Negotiation Access Protocol October 2020 [RFC7515] Jones, M., Bradley, J., and N. Sakimura, "JSON Web Signature (JWS)", RFC 7515, DOI 10.17487/RFC7515, May 2015, <https://www.rfc-editor.org/info/rfc7515>. [RFC7797] Jones, M., "JSON Web Signature (JWS) Unencoded Payload Option", RFC 7797, DOI 10.17487/RFC7797, February 2016, <https://www.rfc-editor.org/info/rfc7797>. [RFC8174] Leiba, B., "Ambiguity of Uppercase vs Lowercase in RFC 2119 Key Words", BCP 14, RFC 8174, DOI 10.17487/RFC8174, May 2017, <https://www.rfc-editor.org/info/rfc8174>. [RFC8259] Bray, T., Ed., "The JavaScript Object Notation (JSON) Data Interchange Format", STD 90, RFC 8259, DOI 10.17487/RFC8259, December 2017, <https://www.rfc-editor.org/info/rfc8259>. [RFC8693] Jones, M., Nadalin, A., Campbell, B., Ed., Bradley, J., and C. Mortimore, "OAuth 2.0 Token Exchange", RFC 8693, DOI 10.17487/RFC8693, January 2020, <https://www.rfc-editor.org/info/rfc8693>. [RFC8705] Campbell, B., Bradley, J., Sakimura, N., and T. Lodderstedt, "OAuth 2.0 Mutual-TLS Client Authentication and Certificate-Bound Access Tokens", RFC 8705, DOI 10.17487/RFC8705, February 2020, <https://www.rfc-editor.org/info/rfc8705>. Appendix A. Document History * -12 - Collapsed "key" and "display" fields into "client" field. - Changed continuation to use optional access token. - Defined flags for special behavior of tokens. - Defined "key": true to mean access token is bound to client's key. - Defined "key": false to indicate an access token. - Added "Elements" section to list and discuss non-role parts of the protocol. * -11 Richer Expires 4 April 2021 [Page 85] Internet-Draft Grant Negotiation Access Protocol October 2020 - Updated based on Design Team feedback and reviews. - Removed oidc_ prefix from several values and used RFC8693 assertion types. - Changed "client" to "RC" throughout. - Changed "user" to "RQ" or "RO" as appropriate. - Added expansions for request and response section introductions. - Added refresh examples. - Added diagrams to RS examples. - Added ui_locales hint to interaction block. - Added section on JSON polymorphism. - Added numerous editorial notes to describe why elements are in place. - Added discussion on composition of roles. - Added requirements for signature methods to cover all aspects of request and mechanisms to do so. * -10 - Switched to xml2rfc v3 and markdown source. - Updated based on Design Team feedback and reviews. - Added acknowledgements list. - Added sequence diagrams and explanations. - Collapsed "short_redirect" into regular redirect request. - Separated pass-by-reference into subsections. - Collapsed "callback" and "pushback" into a single mode-switched method. - Add OIDC Claims request object example. * -09 Richer Expires 4 April 2021 [Page 86] Internet-Draft Grant Negotiation Access Protocol October 2020 - Major document refactoring based on request and response capabilities. - Changed from "claims" language to "subject identifier" language. - Added "pushback" interaction capability. - Removed DIDCOMM interaction (better left to extensions). - Excised "transaction" language in favor of "Grant" where appropriate. - Added token management URLs. - Added separate continuation URL to use continuation handle with. - Added RS-focused functionality section. - Added notion of extending a grant request based on a previous grant. - Simplified returned handle structures. * -08 - Added attached JWS signature method. - Added discovery methods. * -07 - Marked sections as being controlled by a future registry TBD. * -06 - Added multiple resource requests and multiple access token response. * -05 - Added "claims" request and response for identity support. - Added "capabilities" request for inline discovery support. * -04 Richer Expires 4 April 2021 [Page 87] Internet-Draft Grant Negotiation Access Protocol October 2020 - Added crypto agility for callback return hash. - Changed "interaction_handle" to "interaction_ref". * -03 - Removed "state" in favor of "nonce". - Created signed return parameter for front channel return. - Changed "client" section to "display" section, as well as associated handle. - Changed "key" to "keys". - Separated key proofing from key presentation. - Separated interaction methods into booleans instead of "type" field. * -02 - Minor editorial cleanups. * -01 - Made JSON multimodal for handle requests. - Major updates to normative language and references throughout document. - Allowed interaction to split between how the user gets to the AS and how the user gets back. * -00 - Initial submission. Appendix B. Component Data Models While different implementations of this protocol will have different realizations of all the components and artifacts enumerated here, the nature of the protocol implies some common structures and elements for certain components. This appendix seeks to enumerate those common elements. TBD: Client has keys, allowed requested resources, identifier(s), allowed requested subjects, allowed Richer Expires 4 April 2021 [Page 88] Internet-Draft Grant Negotiation Access Protocol October 2020 TBD: AS has "grant endpoint", interaction endpoints, store of trusted client keys, policies TBD: Token has RO, user, client, resource list, RS list, Appendix C. Example Protocol Flows The protocol defined in this specification provides a number of features that can be combined to solve many different kinds of authentication scenarios. This section seeks to show examples of how the protocol would be applied for different situations. Some longer fields, particularly cryptographic information, have been truncated for display purposes in these examples. C.1. Redirect-Based User Interaction In this scenario, the user is the RO and has access to a web browser, and the client can take front-channel callbacks on the same device as the user. This combination is analogous to the OAuth 2 Authorization Code grant type. The client initiates the request to the AS. Here the client identifies itself using its public key. Richer Expires 4 April 2021 [Page 89] Internet-Draft Grant Negotiation Access Protocol October 2020 POST /tx HTTP/1.1 Host: server.example.com Content-type: application/json Detached-JWS: ejy0... { "resources": [ { "actions": [ "read", "write", "dolphin" ], "locations": [ "https://server.example.net/", "https://resource.local/other" ], "datatypes": [ "metadata", "images" ] } ], "client": { "key": { "proof": "jwsd", "jwk": { "kty": "RSA", "e": "AQAB", "kid": "xyz-1", "alg": "RS256", "n": "kOB5rR4Jv0GMeLaY6_It_r3ORwdf8ci_JtffXyaSx8xY..." } } }, "interact": { "redirect": true, "callback": { "method": "redirect", "uri": "https://client.example.net/return/123455", "nonce": "LKLTI25DK82FX4T4QFZC" } } } Richer Expires 4 April 2021 [Page 90] Internet-Draft Grant Negotiation Access Protocol October 2020 The AS processes the request and determines that the RO needs to interact. The AS returns the following response giving the client the information it needs to connect. The AS has also indicated to the client that it can use the given instance identifier to identify itself in future requests (Section 2.3.1). Content-type: application/json { "interact": { "redirect": "https://server.example.com/interact/4CF492MLVMSW9MKMXKHQ", "callback": "MBDOFXG4Y5CVJCX821LH" } "continue": { "access_token": { "value": "80UPRY5NM33OMUKMKSKU", "key": true }, "uri": "https://server.example.com/continue" }, "instance_id": "7C7C4AZ9KHRS6X63AJAO" } The client saves the response and redirects the user to the interaction_url by sending the following HTTP message to the user's browser. HTTP 302 Found Location: https://server.example.com/interact/4CF492MLVMSW9MKMXKHQ The user's browser fetches the AS's interaction URL. The user logs in, is identified as the RO for the resource being requested, and approves the request. Since the AS has a callback parameter, the AS generates the interaction reference, calculates the hash, and redirects the user back to the client with these additional values added as query parameters. HTTP 302 Found Location: https://client.example.net/return/123455 ?hash=p28jsq0Y2KK3WS__a42tavNC64ldGTBroywsWxT4md_jZQ1R2HZT8BOWYHcLmObM7XHPAdJzTZMtKBsaraJ64A &interact_ref=4IFWWIKYBC2PQ6U56NL1 Richer Expires 4 April 2021 [Page 91] Internet-Draft Grant Negotiation Access Protocol October 2020 The client receives this request from the user's browser. The client ensures that this is the same user that was sent out by validating session information and retrieves the stored pending request. The client uses the values in this to validate the hash parameter. The client then calls the continuation URL and presents the handle and interaction reference in the request body. The client signs the request as above. POST /continue HTTP/1.1 Host: server.example.com Content-type: application/json Authorization: GNAP 80UPRY5NM33OMUKMKSKU Detached-JWS: ejy0... { "interact_ref": "4IFWWIKYBC2PQ6U56NL1" } The AS retrieves the pending request based on the handle and issues a bearer access token and returns this to the client. Richer Expires 4 April 2021 [Page 92] Internet-Draft Grant Negotiation Access Protocol October 2020 Content-type: application/json { "access_token": { "value": "OS9M2PMHKUR64TB8N6BW7OZB8CDFONP219RP1LT0", "key": false, "manage": "https://server.example.com/token/PRY5NM33OM4TB8N6BW7OZB8CDFONP219RP1L", "resources": [{ "actions": [ "read", "write", "dolphin" ], "locations": [ "https://server.example.net/", "https://resource.local/other" ], "datatypes": [ "metadata", "images" ] }] }, "continue": { "access_token": { "value": "80UPRY5NM33OMUKMKSKU", "key": true }, "uri": "https://server.example.com/continue" } } C.2. Secondary Device Interaction In this scenario, the user does not have access to a web browser on the device and must use a secondary device to interact with the AS. The client can display a user code or a printable QR code. The client prefers a short URL if one is available, with a maximum of 255 characters in length. The is not able to accept callbacks from the AS and needs to poll for updates while waiting for the user to authorize the request. The client initiates the request to the AS. Richer Expires 4 April 2021 [Page 93] Internet-Draft Grant Negotiation Access Protocol October 2020 POST /tx HTTP/1.1 Host: server.example.com Content-type: application/json Detached-JWS: ejy0... { "resources": [ "dolphin-metadata", "some other thing" ], "client": "7C7C4AZ9KHRS6X63AJAO", "interact": { "redirect": 255, "user_code": true } } The AS processes this and determines that the RO needs to interact. The AS supports both long and short redirect URIs for interaction, so it includes both. Since there is no "callback" the AS does not include a nonce, but does include a "wait" parameter on the continuation section because it expects the client to poll for results. Content-type: application/json { "interact": { "redirect": "https://srv.ex/MXKHQ", "user_code": { "code": "A1BC-3DFF", "url": "https://srv.ex/device" } }, "continue": { "uri": "https://server.example.com/continue/80UPRY5NM33OMUKMKSKU", "wait": 60 } } The client saves the response and displays the user code visually on its screen along with the static device URL. The client also displays the short interaction URL as a QR code to be scanned. If the user scans the code, they are taken to the interaction endpoint and the AS looks up the current pending request based on the incoming URL. If the user instead goes to the static page and enters the code manually, the AS looks up the current pending request based on the value of the user code. In both cases, the user logs in, is Richer Expires 4 April 2021 [Page 94] Internet-Draft Grant Negotiation Access Protocol October 2020 identified as the RO for the resource being requested, and approves the request. Once the request has been approved, the AS displays to the user a message to return to their device. Meanwhile, the client periodically polls the AS every 60 seconds at the continuation URL. The client signs the request using the same key and method that it did in the first request. POST /continue/80UPRY5NM33OMUKMKSKU HTTP/1.1 Host: server.example.com Detached-JWS: ejy0... The AS retrieves the pending request based on the handle and determines that it has not yet been authorized. The AS indicates to the client that no access token has yet been issued but it can continue to call after another 60 second timeout. Content-type: application/json { "continue": { "uri": "https://server.example.com/continue/BI9QNW6V9W3XFJK4R02D", "wait": 60 } } Note that the continuation URL has been rotated since it was used by the client to make this call. The client polls the continuation URL after a 60 second timeout using the new handle. POST /continue/BI9QNW6V9W3XFJK4R02D HTTP/1.1 Host: server.example.com Authorization: GNAP Detached-JWS: ejy0... The AS retrieves the pending request based on the URL, determines that it has been approved, and issues an access token. Richer Expires 4 April 2021 [Page 95] Internet-Draft Grant Negotiation Access Protocol October 2020 Content-type: application/json { "access_token": { "value": "OS9M2PMHKUR64TB8N6BW7OZB8CDFONP219RP1LT0", "key": false, "manage": "https://server.example.com/token/PRY5NM33OM4TB8N6BW7OZB8CDFONP219RP1L", "resources": [ "dolphin-metadata", "some other thing" ] } } Appendix D. No User Involvement In this scenario, the client is requesting access on its own behalf, with no user to interact with. The client creates a request to the AS, identifying itself with its public key and using MTLS to make the request. POST /tx HTTP/1.1 Host: server.example.com Content-type: application/json { "resources": [ "backend service", "nightly-routine-3" ], "client": { "key": { "proof": "mtls", "cert#S256": "bwcK0esc3ACC3DB2Y5_lESsXE8o9ltc05O89jdN-dg2" } } } The AS processes this and determines that the client can ask for the requested resources and issues an access token. Richer Expires 4 April 2021 [Page 96] Internet-Draft Grant Negotiation Access Protocol October 2020 Content-type: application/json { "access_token": { "value": "OS9M2PMHKUR64TB8N6BW7OZB8CDFONP219RP1LT0", "key": true, "manage": "https://server.example.com/token", "resources": [ "backend service", "nightly-routine-3" ] } } D.1. Asynchronous Authorization In this scenario, the client is requesting on behalf of a specific RO, but has no way to interact with the user. The AS can asynchronously reach out to the RO for approval in this scenario. The client starts the request at the AS by requesting a set of resources. The client also identifies a particular user. Richer Expires 4 April 2021 [Page 97] Internet-Draft Grant Negotiation Access Protocol October 2020 POST /tx HTTP/1.1 Host: server.example.com Content-type: application/json Detached-JWS: ejy0... { "resources": [ { "type": "photo-api", "actions": [ "read", "write", "dolphin" ], "locations": [ "https://server.example.net/", "https://resource.local/other" ], "datatypes": [ "metadata", "images" ] }, "read", "dolphin-metadata", { "type": "financial-transaction", "actions": [ "withdraw" ], "identifier": "account-14-32-32-3", "currency": "USD" }, "some other thing" ], "client": "7C7C4AZ9KHRS6X63AJAO", "user": { "sub_ids": [ { "subject_type": "email", "email": "user@example.com" } ] } } The AS processes this and determines that the RO needs to interact. The AS determines that it can reach the identified user asynchronously and that the identified user does have the ability to approve this request. The AS indicates to the client that it can poll for continuation. Richer Expires 4 April 2021 [Page 98] Internet-Draft Grant Negotiation Access Protocol October 2020 Content-type: application/json { "continue": { "access_token": { "value": "80UPRY5NM33OMUKMKSKU", "key": true }, "uri": "https://server.example.com/continue", "wait": 60 } } The AS reaches out to the RO and prompts them for consent. In this example, the AS has an application that it can push notifications in to for the specified account. Meanwhile, the client periodically polls the AS every 60 seconds at the continuation URL. POST /continue HTTP/1.1 Host: server.example.com Authorization: GNAP 80UPRY5NM33OMUKMKSKU Detached-JWS: ejy0... The AS retrieves the pending request based on the handle and determines that it has not yet been authorized. The AS indicates to the client that no access token has yet been issued but it can continue to call after another 60 second timeout. Content-type: application/json { "continue": { "access_token": { "value": "BI9QNW6V9W3XFJK4R02D", "key": true }, "uri": "https://server.example.com/continue", "wait": 60 } } Note that the continuation handle has been rotated since it was used by the client to make this call. The client polls the continuation URL after a 60 second timeout using the new handle. Richer Expires 4 April 2021 [Page 99] Internet-Draft Grant Negotiation Access Protocol October 2020 POST /continue HTTP/1.1 Host: server.example.com Authorization: GNAP BI9QNW6V9W3XFJK4R02D Detached-JWS: ejy0... The AS retrieves the pending request based on the handle and determines that it has been approved and it issues an access token. Content-type: application/json { "access_token": { "value": "OS9M2PMHKUR64TB8N6BW7OZB8CDFONP219RP1LT0", "key": false, "manage": "https://server.example.com/token/PRY5NM33OM4TB8N6BW7OZB8CDFONP219RP1L", "resources": [ "dolphin-metadata", "some other thing" ] } } D.2. Applying OAuth 2 Scopes and Client IDs While the GNAP protocol is not designed to be directly compatible with OAuth 2 [RFC6749], considerations have been made to enable the use of OAuth 2 concepts and constructs more smoothly within the GNAP protocol. In this scenario, the client developer has a "client_id" and set of "scope" values from their OAuth 2 system and wants to apply them to the new protocol. Traditionally, the OAuth 2 client developer would put their "client_id" and "scope" values as parameters into a redirect request to the authorization endpoint. HTTP 302 Found Location: https://server.example.com/authorize ?client_id=7C7C4AZ9KHRS6X63AJAO &scope=read%20write%20dolphin &redirect_uri=https://client.example.net/return &response_type=code &state=123455 Now the developer wants to make an analogous request to the AS using the new protocol. To do so, the client makes an HTTP POST and places the OAuth 2 values in the appropriate places. Richer Expires 4 April 2021 [Page 100] Internet-Draft Grant Negotiation Access Protocol October 2020 POST /tx HTTP/1.1 Host: server.example.com Content-type: application/json Detached-JWS: ejy0... { "resources": [ "read", "write", "dolphin" ], "client": "7C7C4AZ9KHRS6X63AJAO", "interact": { "redirect": true, "callback": { "method": "redirect", "uri": "https://client.example.net/return?state=123455", "nonce": "LKLTI25DK82FX4T4QFZC" } } } The client_id can be used to identify the client's keys that it uses for authentication, the scopes represent resources that the client is requesting, and the "redirect_uri" and "state" value are pre-combined into a "callback" URI that can be unique per request. The client additionally creates a nonce to protect the callback, separate from the state parameter that it has added to its return URL. From here, the protocol continues as above. Appendix E. JSON Structures and Polymorphism The GNAP protocol makes use of polymorphism within the JSON [RFC8259] structures used for the protocol. Each element of this protocol is defined in terms of the JSON data type that its values can take, whether it's a string, object, array, boolean, or number. For some elements, different data types offer different descriptive capabilities and are used in different situations for the same element. Each data type provides a different syntax to express the same underlying semantic protocol element, which allows for optimization and simplification in many common cases. Even though JSON is often used to describe strongly typed structures, JSON on its own is naturally polymorphic. In JSON, the named members of an object have no type associated with them, and any data type can be used as the value for any member. In practice, each member has a semantic type that needs to make sense to the parties creating and consuming the object. Within this protocol, each object member is defined in terms of its semantic content, and this semantic content Richer Expires 4 April 2021 [Page 101] Internet-Draft Grant Negotiation Access Protocol October 2020 might have expressions in different concrete data types for different specific purposes. Since each object member has exactly one value in JSON, each data type for an object member field is naturally mutually exclusive with other data types within a single JSON object. For example, a resource request for a single access token is composed of an array of resource request descriptions while a request for multiple access tokens is composed of an object whose member values are all arrays. Both of these represent requests for access, but the difference in syntax allows the RC and AS to differentiate between the two request types in the same request. Another form of polymorphism in JSON comes from the fact that the values within JSON arrays need not all be of the same JSON data type. However, within this protocol, each element within the array needs to be of the same kind of semantic element for the collection to make sense, even when the data types are different from each other. For example, each aspect of a resource request can be described using an object with multiple dimensional components, or the aspect can be requested using a string. In both cases, the resource request is being described in a way that the AS needs to interpret, but with different levels of specificity and complexity for the RC to deal with. An API designer can provide a set of common access scopes as simple strings but still allow RC developers to specify custom access when needed for more complex APIs. Extensions to this specification can use different data types for defined fields, but Author's Address Justin Richer (editor) Bespoke Engineering Email: ietf@justin.richer.org URI: https://bspk.io/ Richer Expires 4 April 2021 [Page 102]