Skip to main content

OSPF as the PE/CE Protocol in BGP/MPLS VPNs
draft-rosen-vpns-ospf-bgp-mpls-06

Document Type Expired Internet-Draft (individual)
Expired & archived
Authors Eric C. Rosen , Peter Psenak , Padma Pillay-Esnault
Last updated 2003-02-06
RFC stream (None)
Intended RFC status (None)
Formats
Stream Stream state (No stream defined)
Consensus boilerplate Unknown
RFC Editor Note (None)
IESG IESG state Expired
Telechat date (None)
Responsible AD (None)
Send notices to (None)

This Internet-Draft is no longer active. A copy of the expired Internet-Draft is available in these formats:

Abstract

[VPN] describes a method of providing a VPN service. That method allows a variety of different protocols to be used as the routing protocol between the Customer Edge (CE) router and the Provider Edge (PE) router. However, it does not fully specify the procedures which must be implemented within the Provider's network when OSPF is used as the PE/CE routing protocol. This document provides that specification.

Authors

Eric C. Rosen
Peter Psenak
Padma Pillay-Esnault

(Note: The e-mail addresses provided for the authors of this Internet-Draft may no longer be valid.)