PIM-SM Rules for Support of Single-Source Multicast
draft-sandick-pimsm-ssmrules-04
Document | Type |
Expired Internet-Draft
(individual)
Expired & archived
|
|
---|---|---|---|
Authors | Hal J. Sandick , Bradley Cain | ||
Last updated | 2000-03-15 | ||
RFC stream | (None) | ||
Intended RFC status | (None) | ||
Formats | |||
Stream | Stream state | (No stream defined) | |
Consensus boilerplate | Unknown | ||
RFC Editor Note | (None) | ||
IESG | IESG state | Expired | |
Telechat date | (None) | ||
Responsible AD | (None) | ||
Send notices to | (None) |
This Internet-Draft is no longer active. A copy of the expired Internet-Draft is available in these formats:
Abstract
This document describes the minor changes in protocol processing rules for the PIM-SM [PIMSM] protocol to support source specific multicast (SSM) routing semantics over the SSM address range [EXPRESS][SSM]. Used in combination with IGMPv3 [IGMPV3], the SSM delivery model can be supported with current protocol implementations. IGMPv3 can be used for communicating source specific (S,G) channel memberships to local routers; PIM-SM can be used for construction of SSM forwarding trees. This document describes the processing rules for PIM-SM in the SSM address range to support construction of SSM delivery trees.
Authors
(Note: The e-mail addresses provided for the authors of this Internet-Draft may no longer be valid.)