Skip to main content

ALTO/H2: The ALTO Protocol using HTTP/2
draft-schott-alto-new-transport-01

Document Type Replaced Internet-Draft (alto WG)
Authors Roland Schott , Y. Richard Yang , Kai Gao , Jingxuan Zhang
Last updated 2022-06-20 (Latest revision 2022-05-24)
Replaced by draft-ietf-alto-new-transport
Stream Internet Engineering Task Force (IETF)
Intended RFC status (None)
Formats
Expired & archived
Stream WG state Adopted by a WG
Document shepherd (None)
IESG IESG state Replaced by draft-ietf-alto-new-transport
Consensus boilerplate Unknown
Telechat date (None)
Responsible AD (None)
Send notices to (None)

This Internet-Draft is no longer active. A copy of the expired Internet-Draft is available in these formats:

Abstract

The ALTO base protocol [RFC7285] uses HTTP/1.x as the transport protocol and hence ALTO transport includes the limitations of HTTP/1.x. ALTO/SSE [RFC8895] addresses some of the limitations, but is still based on HTTP/1.x. This document introduces ALTO new transport, which provides the transport functions of ALTO/SSE on top of HTTP/2, for more efficient ALTO transport.

Authors

Roland Schott
Y. Richard Yang
Kai Gao
Jingxuan Zhang

(Note: The e-mail addresses provided for the authors of this Internet-Draft may no longer be valid.)