Multi-site EVPN based VXLAN using Border Gateways
draft-sharma-multi-site-evpn-02
| Document | Type |
This is an older version of an Internet-Draft whose latest revision state is "Expired".
Expired & archived
|
|
|---|---|---|---|
| Authors | Rajesh Sharma , Ayan Banerjee , Raghava Sivaramu , Ali Sajassi | ||
| Last updated | 2017-07-17 (Latest revision 2017-01-05) | ||
| RFC stream | (None) | ||
| Formats | |||
| Stream | Stream state | (No stream defined) | |
| Consensus boilerplate | Unknown | ||
| RFC Editor Note | (None) | ||
| IESG | IESG state | Expired | |
| Telechat date | (None) | ||
| Responsible AD | (None) | ||
| Send notices to | (None) |
This Internet-Draft is no longer active. A copy of the expired Internet-Draft is available in these formats:
Abstract
This document describes the procedures for interconnecting two or more BGP based Ethernet VPN (EVPN) sites in a scalable fashion over an IP-only network. The motivation is to support extension of EVPN sites without having to rely on typical Data Center Interconnect (DCI) technologies like MPLS/VPLS for the interconnection. The requirements for such a deployment are very similar to the ones specified in RFC 7209 -- "Requirements for Ethernet VPN (EVPN)".
Authors
Rajesh Sharma
Ayan Banerjee
Raghava Sivaramu
Ali Sajassi
(Note: The e-mail addresses provided for the authors of this Internet-Draft may no longer be valid.)