The SignPuddle Standard for SignWriting Text
draft-slevinski-signwriting-text-04
The information below is for an old version of the document.
| Document | Type |
This is an older version of an Internet-Draft whose latest revision state is "Replaced".
|
|
|---|---|---|---|
| Author | Stephen E. Slevinski Jr. | ||
| Last updated | 2014-11-09 | ||
| Replaced by | draft-slevinski-formal-signwriting | ||
| RFC stream | (None) | ||
| Formats | |||
| Stream | Stream state | (No stream defined) | |
| Consensus boilerplate | Unknown | ||
| RFC Editor Note | (None) | ||
| IESG | IESG state | I-D Exists | |
| Telechat date | (None) | ||
| Responsible AD | (None) | ||
| Send notices to | (None) |
draft-slevinski-signwriting-text-04
Sutton-Slevinski Collaboration S. Slevinski
Internet-Draft SignPuddle
Intended status: Informational November 09, 2014
Expires: May 13, 2015
The SignPuddle Standard for SignWriting Text
draft-slevinski-signwriting-text-04
Abstract
For concreteness, because the universal character set is not yet
universal, and because an international standard for the internet
community should be documented and stable, this I-D has been released
with the intention of producing an RFC to document the character use
and naming conventions of the SignWriting community on the Internet.
The SignWriting Script is an international standard for writing sign
languages by hand or with computers. From education to research,
from entertainment to religion, SignWriting has proven useful because
people are using it to write signed languages. The SignWriting
Script has two major families: Block Printing for the reader and
Handwriting for the writer.
Formal SignWriting uses ASCII strings to name logographic signs. The
mathematical names are explained with tokens and regular expression
patterns. Symbol keys reference the symbols of the International
SignWriting Alphabet 2010. Coordinates define X and Y number values
for 2-dimensional placement. Signs are written in a spatial SignBox,
where each symbol is positioned with a 2-dimension coordinate. For
sorting, each sign can have an optional temporal sequence of symbols
that is outside of the SignBox and the visible text. Completed signs
are written sequentially, interspersed with punctuation symbols, to
form sentences.
The query language of Formal SignWriting uses a similar lite markup
to define a variety of searching possibilities. The spatial SignBox
can be searched for symbols or ranges of symbols. For each symbol or
range, the search can specify if the symbol only needs to be found
somewhere in the SignBox, or if the symbol needs to be found near
certain coordinates. The temporal sequence can be searched for
starting symbols, written as a sequential list of symbols and ranges
of symbols. When searching the temporal sequence, the search results
will be limited to signs that start with a matching temporal
sequence. Each query string is transformed into one or more regular
expressions. The regular expressions are used to quickly search
large amounts of data.
Slevinski Expires May 13, 2015 [Page 1]
Internet-Draft SignWriting Text November 2014
For Unicode, there are several encodings which integrate. Formal
SignWriting is UTF-8. The Unicode 8 specification will include
characters to name the symbols of the International SignWriting
Alphabet 2010. There are 2 separate encodings in the Unicode Private
Use Area. The plane 15 encoding is isomorphic with Formal
SignWriting strings, using 3 characters for each symbol. The plane
16 encoding is focused on the symbols only, using 1 character for
each symbol.
Three appendices discuss additional topics to the standard. The
first discusses the Modern SignWriting theory and example document,
stable since January 12, 2012. The second discusses the symbol
encoding of the International SignWriting Alphabet 2010. The third
discusses the SignPuddle Standards: licences, infrastructure, and
compatibility.
This memo concretely defines a conceptual character encoding map for
the Internet community. It is published for reference, examination,
implementation, and evaluation. Distribution of this memo is
unlimited.
Status of This Memo
This Internet-Draft is submitted in full conformance with the
provisions of BCP 78 and BCP 79.
Internet-Drafts are working documents of the Internet Engineering
Task Force (IETF). Note that other groups may also distribute
working documents as Internet-Drafts. The list of current Internet-
Drafts is at http://datatracker.ietf.org/drafts/current/.
Internet-Drafts are draft documents valid for a maximum of six months
and may be updated, replaced, or obsoleted by other documents at any
time. It is inappropriate to use Internet-Drafts as reference
material or to cite them other than as "work in progress."
This Internet-Draft will expire on May 13, 2015.
Copyright Notice
Copyright (c) 2014 IETF Trust and the persons identified as the
document authors. All rights reserved.
This document is subject to BCP 78 and the IETF Trust's Legal
Provisions Relating to IETF Documents
(http://trustee.ietf.org/license-info) in effect on the date of
publication of this document. Please review these documents
carefully, as they describe your rights and restrictions with respect
Slevinski Expires May 13, 2015 [Page 2]
Internet-Draft SignWriting Text November 2014
to this document. Code Components extracted from this document must
include Simplified BSD License text as described in Section 4.e of
the Trust Legal Provisions and are provided without warranty as
described in the Simplified BSD License.
Table of Contents
1. SignWriting Script . . . . . . . . . . . . . . . . . . . . . 4
1.1. 2-Dimensional Signs . . . . . . . . . . . . . . . . . . . 5
1.2. Punctuation and Text . . . . . . . . . . . . . . . . . . 5
1.3. Block Printing . . . . . . . . . . . . . . . . . . . . . 6
1.4. Handwriting . . . . . . . . . . . . . . . . . . . . . . . 7
2. Formal SignWriting . . . . . . . . . . . . . . . . . . . . . 7
2.1. Symbol Keys . . . . . . . . . . . . . . . . . . . . . . . 9
2.2. Coordinates . . . . . . . . . . . . . . . . . . . . . . . 12
2.3. Spatial SignBox . . . . . . . . . . . . . . . . . . . . . 14
2.4. Temporal Sequence . . . . . . . . . . . . . . . . . . . . 17
2.5. Sentences . . . . . . . . . . . . . . . . . . . . . . . . 19
3. Query Language . . . . . . . . . . . . . . . . . . . . . . . 21
3.1. Searching the Spatial Signbox . . . . . . . . . . . . . . 22
3.2. Searching the Temporal Sequence . . . . . . . . . . . . . 23
3.3. Transformation to Regular Expression . . . . . . . . . . 24
4. SignWriting 2010 . . . . . . . . . . . . . . . . . . . . . . 25
4.1. TrueType Fonts . . . . . . . . . . . . . . . . . . . . . 25
4.2. JavaScript Library . . . . . . . . . . . . . . . . . . . 25
5. Unicode Integration . . . . . . . . . . . . . . . . . . . . . 25
5.1. UTF-8 . . . . . . . . . . . . . . . . . . . . . . . . . . 25
5.2. Unicode 8 . . . . . . . . . . . . . . . . . . . . . . . . 26
5.3. Private Use Area Plane 15 . . . . . . . . . . . . . . . . 26
5.4. Private Use Area Plane 16 . . . . . . . . . . . . . . . . 26
6. IANA Considerations . . . . . . . . . . . . . . . . . . . . . 26
7. Security Considerations . . . . . . . . . . . . . . . . . . . 27
8. References . . . . . . . . . . . . . . . . . . . . . . . . . 27
Appendix A. Modern SignWriting . . . . . . . . . . . . . . . . . 27
Appendix B. ISWA 2010 . . . . . . . . . . . . . . . . . . . . . 27
B.1. Grapheme . . . . . . . . . . . . . . . . . . . . . . . . 27
B.2. Symbol . . . . . . . . . . . . . . . . . . . . . . . . . 28
B.3. Hierarchy . . . . . . . . . . . . . . . . . . . . . . . . 31
B.4. Combined Character Sequence . . . . . . . . . . . . . . . 34
B.5. Validity . . . . . . . . . . . . . . . . . . . . . . . . 36
Appendix C. SignPuddle Standard . . . . . . . . . . . . . . . . 39
C.1. Licenses . . . . . . . . . . . . . . . . . . . . . . . . 39
C.2. Infrastructure . . . . . . . . . . . . . . . . . . . . . 39
C.2.1. International SignWriting Alphabet 2010 . . . . . . . 39
C.2.2. SignPuddle Online . . . . . . . . . . . . . . . . . . 40
C.2.3. SignWriting Icon Server . . . . . . . . . . . . . . . 41
C.2.4. SignWriting Asset Provider . . . . . . . . . . . . . 41
C.2.5. Wikimedia Incubator . . . . . . . . . . . . . . . . . 41
Slevinski Expires May 13, 2015 [Page 3]
Internet-Draft SignWriting Text November 2014
C.2.6. SignWriting Thin Viewer . . . . . . . . . . . . . . . 41
C.3. Compatibility . . . . . . . . . . . . . . . . . . . . . . 41
C.3.1. SignTyp . . . . . . . . . . . . . . . . . . . . . . . 42
C.3.2. SignWriter Studio . . . . . . . . . . . . . . . . . . 42
C.3.3. DELEGS Online . . . . . . . . . . . . . . . . . . . . 43
C.3.4. SWift . . . . . . . . . . . . . . . . . . . . . . . . 43
Author's Address . . . . . . . . . . . . . . . . . . . . . . . . 43
1. SignWriting Script
The SignWriting Script is the universal and complete solution for
written sign language. It has been applied to a wide and deep
international community of sign languages including: American Sign
Language, Arabian Sign Languages, Australian Sign Language, Bolivian
Sign Language, Brazilian Sign Language, British Sign Language,
Catalan Sign Language, Colombian Sign Language, Czech Sign Language,
Danish Sign Language, Dutch Sign Language, Ethiopian Sign Language,
Finnish Sign Language, Flemish Sign Language, French-Belgian Sign
Language, French Sign Language, German Sign Language, Greek Sign
Language, Irish Sign Language, Italian Sign Language, Japanese Sign
Language, Malawi Sign Language, Malaysian Sign Language, Maltese Sign
Language, Mexican Sign Language, Nepalese Sign Language, New Zealand
Sign Language, Nicaraguan Sign Language, Norwegian Sign Language,
Peruvian Sign Language, Philippines Sign Language, Polish Sign
Language, Portugese Sign Language, Quebec Sign Language, South
African Sign Language, Spanish Sign Language, Swedish Sign Language,
Swiss Sign Language, Taiwanese Sign Language, and Tunisian Sign
Language.
Sign language is vastly different than spoken language. Instead of
the sequential sounds of the voice, there is a 3 dimensional space
with simultaneous action. The SignWriting Script creates
2-dimensional writing that is visually icon and full of featural
information. This is true on the symbol level and on the sign level.
A symbol represents phonemic information and is full of featural
information to better understand the phonemes of the symbols. A sign
is a 2-dimensional arrangement of symbols and is full of featural
information to better understand the morphemes of the signs.
The SignWriting Script is an international standard for writing sign
languages by hand or with computers. From education to research,
from entertainment to religion, SignWriting has proven useful because
people are using it to write signed languages.
Initially developed in 1974, the script was written exclusively by
hand for 12 years. Since then the script has spread around the world
and continues to be written on paper and chalkboard.
Slevinski Expires May 13, 2015 [Page 4]
Internet-Draft SignWriting Text November 2014
In 1981, SignWriting Publishing rapidly evolved with Block Printing.
In 1986, computerization of the SignWriting Block Printing began.
The current symbol encoding of the ISWA 2010 has been stable since
the font release on October 20th, 2010. The larger character
encoding model has been stable since the initial release of Modern
SignWriting on January 12th, 2012.
The 2 families of the SignWriting Script are Handwriting for the
writer and Block Printing for the reader. Block Printing uses more
features and Handwriting often uses less. Block printing is used in
education, publishing, and is the basis of the computerized model.
1.1. 2-Dimensional Signs
A sign is a variably-size logographic word. It is a 2-dimensional
combination of symbols inside of a signbox with a tight bounding box
and an explicit center. The size of the signbox varies with the
symbols written inside.
Inside of a 2-dimensional signbox, the symbols are placed in a
freeform, 2-dimensional arrangement. This feature of the script
expresses spatial relation directly.
Writing based on vision uses two viewpoints: receptive and
expressive. The receptive viewpoint is based on the idea of
receiving an image. For the receptive viewpoint, the right hand of a
signer will be written on the left side of the signbox. When
SignWriting is used for transcription, the receptive view is most
often used. The related writing systems of DanceWriting and
MovementWriting normally use the receptive viewpoint.
The expressive viewpoint is based on the idea of expressing a
concept. For the expressive viewpoint, the right hand of a signer
will be written on the right side of the signbox. When SignWriting
is used for authorship, the expressive view is most often used.
The are two main writing planes: the front wall (Frontal Plane) and
the floor (Transverse Plane). The choice of writing plane can affect
the shape of the symbols, such as the fill pattern for the hand shape
palms or the tail for the movement arrows.
There are two perspectives: front and top. The front perspective is
a straight on view of/from the signer. The top perspective is a top-
down view of the signer. Usually, a sign will be written from a
single perspective.
1.2. Punctuation and Text
Slevinski Expires May 13, 2015 [Page 5]
Internet-Draft SignWriting Text November 2014
Logographic signs are mixed with punctuation to form text.
Punctuation is a single symbol and separates a series of signs into
structured sentences. A punctuation symbol is always used alone and
should not be used in a sign. Line breaks should not occur before
punctuation.
When written vertically, SignWriting can use 3 different lanes: left,
middle, and right. The middle lane is the default lane and
punctuation is always used in the middle lane. No matter the lane,
the center of a sign is aligned with the center of the lane.
For body weight shifts to one side or the other, the center of the
sign is aligned with a fixed horizontal offset from the middle lane
into either the left or right lane.
The left and right lanes are used to represent body weight shifts and
are represented by a horizontal offset from the middle lane. Body
weight shifts are important to the grammar of sign languages, used
for two different grammatical aspects: 1) role shifting during sign
language storytelling, and 2) spatial comparisons of two items under
discussion. One "role" or "item" is placed on the right side of the
body (right lane), and the other on the left side of the body (left
lane), and the weight shifts back and forth between the two, with the
narrator in the middle (middle lane).
1.3. Block Printing
Valerie Sutton writes, "SignWriting Printing is easy to read. It is
designed for the reader. The Printing can be written by hand as well
as by computer. If I am writing a letter to a friend in ASL, I write
the letter in SignWriting Printing, taking the time to make sure that
my handwritten-symbols are easy and clear to read. I try to write as
clearly as if I were using a computer. Of course it is slower, but
it is worth it, knowing that my friend will be able to read my
letter!"
With Block Printing, a sign is a cluster of several symbols arranged
in 2-dimensions space. Each symbol has a definite appearance and
understanding within an established symbol set. The exact form of
each symbol is structured, standardized, and highly featural.
Each symbol has two aspects. The first is the line that defines the
positive shape of the symbol. The second aspect is the fill (or
negative space) of the symbol that is sometimes used inside the lines
for palm facing, and inside some arrow heads and tails. Not every
symbol has fill. Fill matters when symbols overlap. The negative
space of the symbol on top will cover part of the symbol underneath.
Slevinski Expires May 13, 2015 [Page 6]
Internet-Draft SignWriting Text November 2014
The Block Printing family is aimed at the needs of the reader and the
publisher. The Block Printing family is ready to standardize with a
fully developed model.
1.4. Handwriting
Valerie Sutton writes, "SignWriting Handwriting is easier to write by
hand, than the Printing. It is designed for the writer. There are
several variations of Handwriting, and since most of the time, the
writer is only writing for private notes, some writers create their
own shortcuts that work just for them...and that is fine!"
The purpose is not to recreate the iconic symbols of the
International SignWriting Alphabet exactly by hand, but the purpose
is to enable the writer to quickly write notes on paper or
chalkboard. Handwriting often drops features of the SignWriting
Script for efficiency and speed. If too many features are dropped,
the writing may loose it's clarity over time as the writer is
distanced from the writing. This is common for Shorthand.
A popular form of SignWriting is cursive. It can be shared among a
groups of writers or it can be individualized and personal. Cursive
writing is designed to have fluid marks and a natural flow. Cursive
writing may use fewer features than the iconic symbols, but should be
related to an iconic symbol in appearance and meaning. Once
developed, this style of writing is great for taking notes in a
class.
Shorthand is a skill of the proficient writer [1]. In 1982, Sign
Language Stenographers could record sign language with SignWriting
Shorthand at normal signing speed [2]. Time tests proved practice
and special training were required. The marks they write are
personal style of quick and efficient strokes with a highly developed
reception to what signifies meaning. They understand the iconic
symbols of the SignWriting Script, but their marks are personal
reminders rather than a fully developed text.
The shorthand in and of itself is often an incomplete representation
of the gestures that were experienced. The shorthand writing can be
thought of as a short-term memory device. Often shorthand notes must
be revised and extended at a later time, the sooner the better.
2. Formal SignWriting
According to Wikipedia, "In mathematics, computer science, and
linguistics, a formal language is a set of strings of symbols that
may be constrained by rules that are specific to it." [3]
Slevinski Expires May 13, 2015 [Page 7]
Internet-Draft SignWriting Text November 2014
Formal SignWriting defines a formal language for the signed languages
of the world. Any sign of any sign language can be written as a
string of ASCII characters.
Formal SignWriting is a heuristic model. The first prototypes were
created in 2008. Through trial and error, the model was successively
refactored to reduce the complexity and the computation cost of the
implementations. The model has been optimized for common usage and
processing. The final model has been stable since January 12th,
2012.
The mathematical names of Formal SignWriting are plain text strings
of characters. These names are described with regular expressions.
Formal languages and regular expressions are used to solve
fundamental problems.
Regular Expression Basics
+----------------+-------------------------+------------------------+
| Characters | Description | Example |
+----------------+-------------------------+------------------------+
| * | Match a literal 0 or | ABC* matches AB, ABC, |
| | more times | ABCC, ... |
+----------------+-------------------------+------------------------+
| + | Match a literal 1 or | ABC+ matches ABC, |
| | more times | ABCC, ABCCC, ... |
+----------------+-------------------------+------------------------+
| ? | Match a literal 0 or 1 | ABC? matches AB or ABC |
| | times | |
+----------------+-------------------------+------------------------+
| {#} | Match a literal "#" | AB{2} matches ABB |
| | times | |
+----------------+-------------------------+------------------------+
| [ ] | Match any single | [ABC] matches A, B, or |
| | literal from a list | C |
+----------------+-------------------------+------------------------+
| [ - ] | Match any single | [A-C] matches A, B, or |
| | literal in a range | C |
+----------------+-------------------------+------------------------+
| ( ) | Creates a group for | A(BC)+ matches ABC, |
| | matching | ABCBC, ABCBCBC, ... |
+----------------+-------------------------+------------------------+
| ( | ) | Matches one of several | (AB|BC|CD) will match |
| | alternatives | AB, BC, or CD |
+----------------+-------------------------+------------------------+
Table 1
Slevinski Expires May 13, 2015 [Page 8]
Internet-Draft SignWriting Text November 2014
The Formal SignWriting encoding model makes explicit those features
which can be effectively and efficiently processed. The mathematical
names are structured with 11 different tokens. They can be grouped
in 4 layers: the 5 structural makers (A, B, L, M, R), the 3 base
symbol ranges (w, s, P), the 2 modifier indexes (i, o), and the
numbers (n).
The Tokens of Formal SignWriting
+-------+-------------------------------+
| Token | Description |
+-------+-------------------------------+
| A | Sequence Marker |
+-------+-------------------------------+
| B | SignBox Marker |
+-------+-------------------------------+
| L | Left Lane Marker |
+-------+-------------------------------+
| M | Middle Lane Marker |
+-------+-------------------------------+
| R | Right Lane Marker |
+-------+-------------------------------+
| w | Writing BaseSymbols |
+-------+-------------------------------+
| s | Detailed Location BaseSymbols |
+-------+-------------------------------+
| P | Punctuation BaseSymbols |
+-------+-------------------------------+
| i | Fill Modifiers |
+-------+-------------------------------+
| o | Rotation Modifiers |
+-------+-------------------------------+
| n | Number from 250 to 749 |
+-------+-------------------------------+
Table 2
These tokens are used in patterns to form written sign language. The
following token patterns fully describe the SignWriting Text
language. [4]
2.1. Symbol Keys
Symbol keys can be described with 3 tokens: base symbol, fill
modifier, and rotation modifier.
Symbol Key Tokens
Slevinski Expires May 13, 2015 [Page 9]
Internet-Draft SignWriting Text November 2014
+------------+------------------------------------------------------+
| Token | Description |
| Pattern | |
+------------+------------------------------------------------------+
| w | Writing BaseSymbols. |
+------------+------------------------------------------------------+
| s | Detailed Location BaseSymbols. |
+------------+------------------------------------------------------+
| P | Punctuation BaseSymbols. |
+------------+------------------------------------------------------+
| i | Fill Modifiers. |
+------------+------------------------------------------------------+
| o | Rotation Modifiers. |
+------------+------------------------------------------------------+
| wio | A writing symbol as 3 tokens of writing base, fill |
| | modifier and rotation modifier. Writing symbols can |
| | be used in the spatial SignBox or the temporal |
| | sequence. |
+------------+------------------------------------------------------+
| [ws]io | A writing symbol or a detailed location symbol as 3 |
| | tokens of base, fill modifier, and rotation |
| | modifier. Writing symbols and detail location |
| | symbols can be used in the temporal sequence. |
+------------+------------------------------------------------------+
| Pio | A punctuation symbol as 3 tokens of punctuation |
| | base, fill modifier, and rotation modifier. |
| | Punctuation symbols divide signs into sentences. |
+------------+------------------------------------------------------+
Table 3
Symbol keys are 6 characters long. The first character of a symbol
key is always "S". The next 3 characters identify the symbol base.
The last two characters identify the fill and rotation modifiers
respectively.
Symbol Key Definition
Slevinski Expires May 13, 2015 [Page 10]
Internet-Draft SignWriting Text November 2014
+--------------------------------+-----------------------+
| Regular Expression | Description |
+--------------------------------+-----------------------+
| S | Start of symbol key |
+--------------------------------+-----------------------+
| [123][0-9a-f]{2} | Symbol key base |
+--------------------------------+-----------------------+
| [0-5] | Fill modifier |
+--------------------------------+-----------------------+
| [0-9a-f] | Rotation modifier |
+--------------------------------+-----------------------+
| S[123][0-9a-f]{2}[0-5][0-9a-f] | Symbol key definition |
+--------------------------------+-----------------------+
Table 4
Symbol keys can be divided between several types. Each type has a
starting and ending base value.
Symbol Key Type and Ranges
Slevinski Expires May 13, 2015 [Page 11]
Internet-Draft SignWriting Text November 2014
+---------------+---------+-----+-----------------------------------+
| Type | Start | End | Description |
+---------------+---------+-----+-----------------------------------+
| all symbols | 100 | 38b | All symbol keys occur in this |
| | | | range. |
+---------------+---------+-----+-----------------------------------+
| writing | 100 | 37e | Symbols that can be used in the |
| | | | spatial SignBox or the temporal |
| | | | sequence. |
+---------------+---------+-----+-----------------------------------+
| hand | 100 | 204 | Various handshapes |
+---------------+---------+-----+-----------------------------------+
| movement | 205 | 2f6 | Contact symbols, small finger |
| | | | movements, straight arrows, |
| | | | curved arrows and circles. |
+---------------+---------+-----+-----------------------------------+
| dynamic | 2f7 | 2fe | Dynamic symbols are used to give |
| | | | the "feeling" or "tempo" to |
| | | | movement. |
+---------------+---------+-----+-----------------------------------+
| head | 2ff | 36c | Symbols for the head and face. |
+---------------+---------+-----+-----------------------------------+
| hcenter | 2ff | 36c | Used to determine the horizontal |
| | | | center of a sign. Same as the |
| | | | head type. |
+---------------+---------+-----+-----------------------------------+
| vcenter | 2ff | 375 | Use to determine the vertical |
| | | | center of a sign. Includes the |
| | | | head an trunk types. |
+---------------+---------+-----+-----------------------------------+
| trunk | 36d | 375 | Symbols for torso movement, |
| | | | shoulders, and hips. |
+---------------+---------+-----+-----------------------------------+
| limb | 376 | 37e | Symbols for limbs and fingers. |
+---------------+---------+-----+-----------------------------------+
| location | 37f | 386 | Details location symbols can only |
| | | | be used in the temporal sequence. |
+---------------+---------+-----+-----------------------------------+
| punctuation | 387 | 38b | Punctual symbols are used to |
| | | | divide signs into sentences. |
+---------------+---------+-----+-----------------------------------+
Table 5
2.2. Coordinates
Coordinates can be described with 2 tokens: number and number. These
numbers represent the X and Y coordinates respectively.
Slevinski Expires May 13, 2015 [Page 12]
Internet-Draft SignWriting Text November 2014
The number characters encode the ruler principle with characters.
The ruler principle is built in automatically for scripts written
sequentially in one dimension. The number characters are needed to
specify the spatial relationship between symbols.
Coordinate Tokens
+----------------+---------------------------------------------+
| Token Patterns | Description |
+----------------+---------------------------------------------+
| n | Number from 250 to 749 |
+----------------+---------------------------------------------+
| nn | Coordinate with X and Y values as 2 numbers |
+----------------+---------------------------------------------+
Table 6
There are 2 definitions for a coordinate. The more general
definition simply defines 3 numbers followed by an "x" followed by 3
more numbers. The more explicit definition correctly restricts the
number range from 250 to 749. The general coordinate definition is
adequate for processing.
Coordinate Definition
Slevinski Expires May 13, 2015 [Page 13]
Internet-Draft SignWriting Text November 2014
+---------------------------------------------------------+---------+
| Regular Expression | Descrip |
| | tion |
+---------------------------------------------------------+---------+
| [0-9]{3} | General |
| | 3 digit |
| | number |
| | definit |
| | ion. |
+---------------------------------------------------------+---------+
| [0-9]{3}x[0-9]{3} | General |
| | coordin |
| | ate def |
| | inition |
| | . |
+---------------------------------------------------------+---------+
| (2[5-9][0-9]|[3-6][0-9]{2}|7[0-4][0-9]) | Explici |
| | t |
| | number |
| | definit |
| | ion |
| | from |
| | 250 to |
| | 749. |
+---------------------------------------------------------+---------+
| (2[5-9][0-9]|[3-6][0-9]{2}|7[0-4][0-9])x(2[5-9][0-9]|[3 | Explici |
| -6][0-9]{2}|7[0-4][0-9]) | t coord |
| | inate d |
| | efiniti |
| | on |
+---------------------------------------------------------+---------+
Table 7
2.3. Spatial SignBox
The visual image of a logographic sign is a 2-dimension arrangement
of symbols inside of a signbox. Each signbox has a defined width,
height, and 2-dimensional center that can be calculated from the
plain text.
Each logographic sign exists on its own 2-dimensional signbox. Each
point on the signbox is identified with an X and a Y coordinate.
Each signbox has a defined center. Formal numbers range from 250 to
749. Informal number have no limit.
Y Axis
| 250
Slevinski Expires May 13, 2015 [Page 14]
Internet-Draft SignWriting Text November 2014
|
|
|
|
|
X Axis |
-----------+------------
250 | 749
|
|
|
|
|
| 749
Symbols are placed on the signbox with coordinates that represent the
top-left of the symbol image. Symbol images may overlap.
The Spatial SignBox can be described with 8 tokens.
Spatial SignBox Tokens
Slevinski Expires May 13, 2015 [Page 15]
Internet-Draft SignWriting Text November 2014
+---------------------+---------------------------------------------+
| Token Pattern | Description |
+---------------------+---------------------------------------------+
| B | SignBox Marker |
+---------------------+---------------------------------------------+
| L | Left Lane Marker |
+---------------------+---------------------------------------------+
| M | Middle Lane Marker |
+---------------------+---------------------------------------------+
| R | Right Lane Marker |
+---------------------+---------------------------------------------+
| w | Writing BaseSymbols |
+---------------------+---------------------------------------------+
| i | Fill Modifiers |
+---------------------+---------------------------------------------+
| o | Rotation Modifiers |
+---------------------+---------------------------------------------+
| n | Number from 250 to 749 |
+---------------------+---------------------------------------------+
| wio | A writing symbol as 3 tokens of writing |
| | base, fill modifier and rotation modifier |
+---------------------+---------------------------------------------+
| nn | Coordinate with X and Y values as 2 numbers |
+---------------------+---------------------------------------------+
| wionn | A spatial symbol as 5 tokens, with 3 tokens |
| | for a writing symbol and 2 tokens for |
| | coordinates of top left placement |
+---------------------+---------------------------------------------+
| (wionn)* | Zero or more spatial symbols |
+---------------------+---------------------------------------------+
| Bnn(wionn)* | A signbox with a preprocessed maximum |
| | coordinate and a list of spatial symbols |
| | used for horizontal writing |
+---------------------+---------------------------------------------+
| [LMR] | A lane marker: either left, middle or |
| | right. |
+---------------------+---------------------------------------------+
| [LMR]nn(wionn)* | A signbox in either the left, middle, or |
| | right lane with a preprocessed maximum |
| | coordinate and a list of spatial symbols |
| | used for vertical writing |
+---------------------+---------------------------------------------+
Table 8
The Spatial SignBox is assigned to a lane, has a preprocessed maximum
coordinate and zero or more writing symbols with X and Y coordinates.
Slevinski Expires May 13, 2015 [Page 16]
Internet-Draft SignWriting Text November 2014
Spatial SignBox Definition
+---------------------------------------------------------+---------+
| Regular Expression | Descrip |
| | tion |
+---------------------------------------------------------+---------+
| S[123][0-9a-f]{2}[0-5][0-9a-f] | Symbol |
| | key def |
| | inition |
| | . |
+---------------------------------------------------------+---------+
| [0-9]{3}x[0-9]{3} | Coordin |
| | ate def |
| | inition |
| | . |
+---------------------------------------------------------+---------+
| [BLMR]([0-9]{3}x[0-9]{3})(S[123][0-9a-f]{2}[0-5][0-9a-f | SignBox |
| ][0-9]{3}x[0-9]{3})* | definit |
| | ion. |
+---------------------------------------------------------+---------+
Table 9
2-dimensional space does not have a normative 1-dimensional order.
When symbols overlap, the relative order of the overlapping symbols
is important. Otherwise, the exact string order of the spatial
symbols is unpredictable.
2.4. Temporal Sequence
Signs are written in 2-dimensional space which does not have a
normative 1-dimensional order. Any 1-dimensional order of
2-dimensional space is subjective. Some 1-dimensional orders may be
canonical according to a particular theory, but there are a variety
of theories on setting a 1-dimensional order.
The temporal sequence describes a 1-dimensional order that is
separate from the spatial SignBox;; It does not order the
2-dimensional space directly. The temporal sequence is written as an
optional prefix to a spatial SignBox. The temporal sequence will
always use the symbols that are used in the spatial SignBox, but it
does not need to use all of them and it is not limited to only those
symbols. The temporal sequence is a list of writing symbols and/or
detailed location symbols that identify temporal order and additional
analysis. A valid sequence must contain at least one symbol and can
not contain punctuation.
Slevinski Expires May 13, 2015 [Page 17]
Internet-Draft SignWriting Text November 2014
The temporal sequence allows for sorting that is universally
supported through binary string comparison.
There are several theories on the best way to structure a temporal
sequence. The most productive is based on the SignSpelling Sequence
theory of Valerie Sutton. A temporal sequence is structured as a
series of starting handshapes followed by optional movements,
transitional handshapes, movement, and end handshapes. Only symbols
of type "hand" and "movement" should be used in this first section.
The last section of the temporal sequence should contain symbols of
of type "dynamic", "head", "trunk", and "limb".
Detailed location symbols of type "location" can be used in a
temporal sequence, but are rarely (if ever) needed for general
writing.
A temporal sequence can be described with 5 tokens.
Temporal Sequence Tokens
+---------------------+---------------------------------------------+
| Token Patterns | Description |
+---------------------+---------------------------------------------+
| A | Sequence Marker |
+---------------------+---------------------------------------------+
| w | Writing BaseSymbols |
+---------------------+---------------------------------------------+
| s | Detailed Location BaseSymbols |
+---------------------+---------------------------------------------+
| i | Fill Modifiers |
+---------------------+---------------------------------------------+
| o | Rotation Modifiers |
+---------------------+---------------------------------------------+
| (A([ws]io)+)? | An optional temporal sequence to be used as |
| | a prefix for a SignBox |
+---------------------+---------------------------------------------+
Table 10
The temporal prefix starts with a sequence marker and includes an
ordered list of writing symbols and detailed locations.
Temporal Sequence Definition
Slevinski Expires May 13, 2015 [Page 18]
Internet-Draft SignWriting Text November 2014
+-------------------------------------------+-----------------------+
| Regular Expression | Description |
+-------------------------------------------+-----------------------+
| (A(S[123][0-9a-f]{2}[0-5][0-9a-f])+)? | An optional temporal |
| | sequence as a |
| | sequence marker |
| | followed by one or |
| | more symbols. |
+-------------------------------------------+-----------------------+
Table 11
2.5. Sentences
General signs are written as a spatial SignBox of symbols in
2-dimensional space. Sortable signs include a temporal sequence as a
1-dimensional prefix to the spatial SignBox.
Signs are mixed with punctuation to form text. Punctuation is a
single symbol and separates a series of signs into structured
sentences. A punctuation symbol is always used alone and should not
be used in a sign. Line breaks should not occur before punctuation.
When written vertically, SignWriting can use 3 different lanes: left,
middle, and right. The middle lane is the default lane and
punctuation is always used in the middle lane. No matter the lane,
the center of a sign is aligned with the center of the lane.
For body weight shifts to one side or the other, the center of the
sign is aligned with a fixed horizontal offset from the middle lane
into either the left or right lane.
The left and right lanes are used to represent body weight shifts and
are represented by a horizontal offset from the middle lane. Body
weight shifts are important to the grammar of sign languages, used
for two different grammatical aspects: 1) role shifting during sign
language storytelling, and 2) spatial comparisons of two items under
discussion. One "role" or "item" is placed on the right side of the
body (right lane), and the other on the left side of the body (left
lane), and the weight shifts back and forth between the two, with the
narrator in the middle (middle lane).
Sentence Token Patterns
Slevinski Expires May 13, 2015 [Page 19]
Internet-Draft SignWriting Text November 2014
+-------------------------------------------+-----------------------+
| Regular Expression | Description |
+-------------------------------------------+-----------------------+
| Pionn | a punctuation symbol |
| | as a punctuation base |
| | symbol with a |
| | preprocessed minimum |
| | coordinate |
+-------------------------------------------+-----------------------+
| (((A([ws]io)+)?Bnn(wionn)*)|Pionn)+ | a sign text for |
| | horizontal writing as |
| | a string of signboxes |
| | (with optional |
| | prefixes) and |
| | punctuation |
+-------------------------------------------+-----------------------+
| (((A([ws]io)+)?[LMR]nn(wionn)*)|Pionn)+ | a sign text for |
| | vertical writing as a |
| | string of signboxes |
| | in lanes (with |
| | optional prefixes) |
| | and punctuation |
+-------------------------------------------+-----------------------+
Table 12
Sentences mix signs with punctuation to form text.
Temporal Sequence Definition
Slevinski Expires May 13, 2015 [Page 20]
Internet-Draft SignWriting Text November 2014
+------------------------------------------------------------+------+
| Regular Expression | Desc |
| | ript |
| | ion |
+------------------------------------------------------------+------+
| S38[7-9ab][0-5][0-9a-f][0-9]{3}x[0-9]{3} | Punc |
| | tuat |
| | ion |
| | defi |
| | niti |
| | on |
+------------------------------------------------------------+------+
| ((A(S[123][0-9a-f]{2}[0-5][0-9a-f])+)?[BLMR]([0-9]{3}x[0-9 | Form |
| ]{3})(S[123][0-9a-f]{2}[0-5][0-9a-f][0-9]{3}x[0-9]{3})*|S3 | al S |
| 8[7-9ab][0-5][0-9a-f][0-9]{3}x[0-9]{3})( (A(S[123][0-9a-f] | ignW |
| {2}[0-5][0-9a-f])+)?[BLMR]([0-9]{3}x[0-9]{3})(S[123][0-9a- | riti |
| f]{2}[0-5][0-9a-f][0-9]{3}x[0-9]{3})*| | ng |
| S38[7-9ab][0-5][0-9a-f][0-9]{3}x[0-9]{3})* | text |
| | defi |
| | niti |
| | on |
+------------------------------------------------------------+------+
Table 13
3. Query Language
The query language is a lite ASCII markup similar to Formal
SignWriting. Any Formal SignWriting string can easily be converted
into a query string. The query string is a concise representation
for a much larger and detailed set of regular expressions. The
regular expressions can be used to quickly and accurately search
large files and databases containing Formal SignWriting.
A filter and repeat pattern of searching is used as a series of match
criteria. A file, database, or text input is searched using a
sequence of steps. Each step applies a single match criteria.
Matching results are collated and the next search criteria is
applied. The pattern of searching the previous results continues
until all regular expressions have been used.
There are two main sections of a query string. The first searches
the spatial signbox. The second searches the temporal sequence.
Both sections use the same definition for a symbol or a range. The
symbol search can match an exact symbol, or a set of related symbols.
For the fill and rotation modifiers, the "u" character is a wildcard.
The "u" stands for unknown and will match all values rather than a
specific character. The range search can match a range of base
Slevinski Expires May 13, 2015 [Page 21]
Internet-Draft SignWriting Text November 2014
symbols. The base symbol range consists of 2 values: the starting
base symbol and the ending base symbol. Every symbol between these 2
base symbols will be matched.
'Symbol Search' S[123][0-9a-f]{2}[0-5u][0-9a-fu]
'Range Search' R[123][0-9a-f]{2}t[123][0-9a-f]{2}
The full query string definition allows for the possibility of
searching the temporal sequence and the spatial signbox at the same
time.
'Query String' Q((A(S[123][0-9a-f]{2}[0-5u][0-9a-fu]|R[123][0-9a-f]{
2}t[123][0-9a-f]{2})+)?T)?(S[123][0-9a-f]{2}[0-5u][0-9a-fu]([0-9]{
3}x[0-9]{3})?|R[123][0-9a-f]{2}t[123][0-9a-f]{2}([0-9]{3}x[0-9]{3}
)?)*(V[0-9]+)?
3.1. Searching the Spatial Signbox
The spatial signbox is a list of symbols with 2-dimensional
placement. The query "Q" will find all signs regardless of the
symbols used or their placement.
It is possible to specify one or more symbols (or ranges of symbols)
that must be included in the signbox to indicate a match. The order
of the symbols is not important. Each symbol (or range) can include
an optional coordinate. The coordinate is a restriction on the
match, such that a symbol must be used within a certain variance of
the coordinate to qualify as a match.
The variance is a number value, 0 or greater with a default value of
20. A variance of 0 will only find symbols used at an exact
coordinate. A variance of 5 will match the symbols used at a
coordinate, plus or minus 5 for both X and Y numbers.
'Symbol Search with Optional Coordinate' S[123][0-9a-f]{2}[0-5u][0
-9a-fu]([0-9]{3}x[0-9]{3})?
'Range Search with Optional Coordinate'
R[123][0-9a-f]{2}t[123][0-9a-f]{2}([0-9]{3}x[0-9]{3})?
'Variance' (V[0-9]+)?
'Spatial Signbox Search Query' Q(S[123][0-9a-f]{2}[0-5u][0-9a-fu]([0
-9]{3}x[0-9]{3})?|R[123][0-9a-f]{2}t[123][0-9a-f]{2}([0-9]{3}x[0-9
]{3})?)*(V[0-9]+)?
Slevinski Expires May 13, 2015 [Page 22]
Internet-Draft SignWriting Text November 2014
Spatial Signbox Query Examples
+------------------------+------------------------------------------+
| Query | Description |
+------------------------+------------------------------------------+
| Q | All signs |
+------------------------+------------------------------------------+
| QS100uu | Signs with the index handshape in the |
| | spatial order |
+------------------------+------------------------------------------+
| QS100uu480x480 | Signs with the index handshape in the |
| | spatial order used near coordinate |
| | (480,480) |
+------------------------+------------------------------------------+
| QS100uu480x480V0 | Signs with the index handshape in the |
| | spatial order used at the exact |
| | coordinate (480,480) |
+------------------------+------------------------------------------+
| QS100uuR2fft36c | Signs with the index handshape and a |
| | symbol from the head & face range |
+------------------------+------------------------------------------+
Table 14
3.2. Searching the Temporal Sequence
The temporal sequence is a list of symbol keys. The query "QT" will
find all signs that include a temporal sequence.
It is possible to specify the start of the temporal sequence by
identifying a series of symbols and/or ranges. The query will start
with an "QA" and end with a "T", such as "QA...T". Between the "QA"
and "T", a series of symbol searches and/or range searches will
specify the desired start of the temporal sequence. The order of the
symbols and ranges is important.
'Temporal Sequence Search Query' Q((A(S[123][0-9a-f]{2}[0-5u][0-9a-f
u]|R[123][0-9a-f]{2}t[123][0-9a-f]{2})+)?T)?
Temporal Sequence Query Examples
Slevinski Expires May 13, 2015 [Page 23]
Internet-Draft SignWriting Text November 2014
+-----------------------------+-------------------------------------+
| Query | Description |
+-----------------------------+-------------------------------------+
| QT | All signs that include the temporal |
| | sequence |
+-----------------------------+-------------------------------------+
| QAS100uuT | Signs with a temporal sequence that |
| | starts with the index handshape |
+-----------------------------+-------------------------------------+
| QAS100uuR100t204S20500T | Signs with a temporal sequence that |
| | starts with the index handshape, |
| | followed by any handshape, followed |
| | by the single contact |
+-----------------------------+-------------------------------------+
Table 15
3.3. Transformation to Regular Expression
The conversion from Query String to Regular Expression has been fully
implemented in the SignWriting Icon Server.
The Query Language to regular expression generator uses the following
regular expression structures as building blocks.
'Temporal Sequence Prefix' (A(S[123][0-9a-f]{2}[0-5][0-9a-f])+)
'SignBox Prefix' [BLMR]([0-9]{3}x[0-9]{3})
'Spatial Symbols' (S[123][0-9a-f]{2}[0-5][0-9a-f][0-9]{3}x[0-9]{3})*
The Temporal Sequence Prefix is a structural marker followed by one
or more symbols. For the query string "QT", the prefix is required.
For the general "Q", the prefix is optional so "?" is appended to the
Temporal Sequence Prefix regular expression.
The SignBox Prefix is a combination of structural marker and
preprocessed maximum coordinate. Every constructed regular
expression will include the SignBox Prefix.
The Spatial Symbols is zero or more symbol definitions and associated
coordinates. The Spatial Symbols regular expression is used for
every search. For both "Q" and "QT", it is the only symbol matching
used. When searching for specific symbols and ranges, the general
Spatial Symbols definition will sandwich the specific search
definitions.
Slevinski Expires May 13, 2015 [Page 24]
Internet-Draft SignWriting Text November 2014
Searching for number ranges with regular expressions requires a
unique technique. This technique was described to the LinkedIn
Regular Expression Experts at the end of 2011 [5]. Searching for
number ranges in hexadecimal with regular expressions is slightly
more complicated but uses the same solution.
4. SignWriting 2010
SignWriting 2010 is the modern implementation and international
specification of the SignWriting script for the internet community
that includes TrueType Fonts and a compact JavaScript library.
4.1. TrueType Fonts
The SignWriting 2010 TrueType fonts are available for download and
installation. The fonts have been tailored for the SignWriting 2010
JavaScript library.
4.2. JavaScript Library
The JavaScript library leverages the TrueType fonts without any
additional requirements. The SignWriting 2010 JavaScript library is
contained in a single file and can be included in any HTML page or
JavaScript environment.
5. Unicode Integration
SignWriting Text is integrated with Unicode in a varieties of ways.
The TrueType fonts of SignWriting 2010 are compatible with each of
the varieties.
5.1. UTF-8
Formal SignWriting is based on ASCII, so it can be supported anywhere
ASCII is supported. ASCII is a subset of UTF-8, with a one-to-one
character correspondence. Anywhere UTF-8 is supported, the size of
the Formal SignWriting strings is equal to the ASCII encoding of 8
bits per character. With UTF-32, the size of the string is 4 times
that of the ASCII encoding, requiring 32 bits for each character.
The Formal SignWriting strings have an equivalent encoding on plane
15 of the Private Use Area.
Slevinski Expires May 13, 2015 [Page 25]
Internet-Draft SignWriting Text November 2014
5.2. Unicode 8
The symbols of the International SignWriting Alphabet 2010 have been
approved for Unicode 8, which will be released next year. Every
symbol of the ISWA 2010 can be described with 1 to 3 characters.
Due to the variable size of the symbol description, both sorting and
searching have been compromised. The sorting issue has not been
resolved. The searching issue either complicates the routines or
makes it impossible to resolve ambiguity. It should be noted that a
basic search and replace of symbol names will likely corrupt the
text.
5.3. Private Use Area Plane 15
The Unicode PUA is a simple shift of the x-Binary-SignWriting coded
character set. Each code is increased by decimal value 1,038,080
which is FD700 in hex.
5.4. Private Use Area Plane 16
Every symbol of the ISWA 2010 can be described with a single
character on plane 16 of the Private Use Area. A simple formula
transforms a symbol key into a codepoint.
6. IANA Considerations
This section provides guidance to the Internet Assigned Numbers
Authority (IANA) regarding registration of values related to the code
spaces of the Center for Sutton Movement Writing, in accordance with
[RFC2978]. protocol, in accordance with BCP 26, [RFC2434].
See IANA: http://www.rfc-editor.org/rfc/rfc2978.txt
Conforms with RFC 2040.
There are three name spaces for the Center for Sutton Movement
Writing that require definition and extension: x-ISWA-2010, x-Binary-
SignWriting, and x-Character-SignWriting
SignWriting Text is an international standard with several coded
character sets. These sets may require additional hand and mouth
shapes.
The following terms are used here with the meanings defined in BCP
26: "name space", "assigned value", "registration".
Slevinski Expires May 13, 2015 [Page 26]
Internet-Draft SignWriting Text November 2014
The following policies are used here with the meanings defined in BCP
26: "Private Use", "First Come First Served", "Expert Review",
"Specification Required", "IETF Consensus", "Standards Action".
7. Security Considerations
None.
8. References
Appendix A. Modern SignWriting
This Internet Draft is in complete agreement with the theory and
example workbook released on January 12th, 2012 called Modern
SignWriting [6]. Modern SignWriting has example text and concretely
defines the processes available. It fully documented the text
encoding with regular expressions.
The Formal SignWriting strings are exactly the same as they appear in
the Modern SignWriting document. The query language is nearly the
same, with a compatible improvement for searching the temporal
sequence.
Appendix B. ISWA 2010
The ISWA 2010 is the abstract symbolset for the x-ISWA-2010 coded
character set. The symbols are visually iconic, uniquely identified,
and organized in a layered hierarchy (Appendix B.3).
The x-ISWA-2010 is a 16-bit coded character used in the font software
to access the symbol glyphs.
The x-Binary-SignWriting is a 12-bit coded character set that does
not directly encode the symbols of the ISWA 2010, but divides each
symbol into a combination of 3 characters. The first character
represents the base of the symbol. The next represents the fill of
the symbol. The last character represents the rotation of the
symbol.
B.1. Grapheme
The grapheme is the fundamental unit of writing for the SignWriting
script. Many graphemes of SignWriting are visually iconic. The main
writing graphemes of SignWriting represent a visual conception:
either hands, movement, dynamics, timing, head, face, trunk, or limb.
The body concept is a combination of trunk and limb. The specific
size and shape of each grapheme is designed to balance and complement
other graphemes.
Slevinski Expires May 13, 2015 [Page 27]
Internet-Draft SignWriting Text November 2014
The writing graphemes are extensive and specifically organized for
written sign language and sign gestures. The writing graphemes do
not include the specific graphemes of DanceWriting or the general
graphemes of MovementWriting.
The writing graphemes are used in clusters. A cluster is a spatial
grouping of graphemes written as a single unit. The graphemes can
overlap and obscure graphemes underneath. A cluster can represents a
sign of a sign language or a visual performance of a sign gesture.
Detailed location graphemes are separate from the main writing
graphemes. Detailed location graphemes are used individually or
sequentially. They represent isolated analysis that is written
outside the cluster.
Punctuation graphemes are used when writing sentences. They are used
individually, between clusters.
When written by hand, lines are drawn to form each grapheme.
Different styles draw different types of lines: either for personal
taste, speed, or quality. The main types of handwriting are formal,
cursive, and shorthand. Formal handwriting, equivalent to block
printing, includes defined lines for all grapheme features, specific
palm facings for hand shapes, and detailed arrow heads and tails.
Cursive handwriting is more fluid and less detailed. Handwriting for
personal use can omit palm facings, generalize arrows, and other
liberties of personal consumption. Shorthand is a further reduction
of detail, written for speed. Shorthand is a memory aid to a written
record and should be rewritten soon after the notes were taken.
Understanding the ratios of size and shape for the graphemes improves
hand writing. SignWriting was an exclusively handwritten script for
7 years before publishing formalized the Block Printing model.
B.2. Symbol
There are 37,811 symbols, each with a unique ID. A symbol ID is a
sequence of six formatted numbers of increasing detail. The first
dashed number defines the category (11). The first two dashed
numbers define the group (11-22). The first four dashed numbers
define a base (11-22-333-44). The fifth number represents the fill
(55). The sixth number represents the rotation (66). A symbol ID is
a combination of base ID with a valid fill and a valid rotation. A
symbol ID has the format "nn-nn-nnn-nn-nn-nn", where each "n" is a
digit from 0 to 9.
The fill modifier can best be understood through the palm facing of
the hand graphemes. The palm facing is based on planes. The
Slevinski Expires May 13, 2015 [Page 28]
Internet-Draft SignWriting Text November 2014
SignWriting script uses two planes: the Front Wall (Frontal Plane)
and the Floor (Transverse Plane). There are 6 palm facings. The
first three palm facings are parallel with the Front Wall. The
second three palm facings are parallel with the Floor. The reader
can view the signer from different viewpoints (expressive or
receptive) and can view the hands from different perspectives (front
or top), but no matter what the viewpoint or perspective, the first
three Fills represent the palm facing parallel to the Front Wall and
the second three Fills represent the palm facing parallel to the
Floor.
+--------+-----------------------------+----------------------------+
| Fill | Indicator | Meaning |
+--------+-----------------------------+----------------------------+
| 01 | grapheme with white palm | reader sees palm of hand |
| | | parallel Front Wall |
+--------+-----------------------------+----------------------------+
| 02 | grapheme with half black | reader sees side of hand |
| | palm | parallel Front Wall |
+--------+-----------------------------+----------------------------+
| 03 | grapheme with black palm | reader sees back of hand |
| | | parallel Front Wall |
+--------+-----------------------------+----------------------------+
| 04 | grapheme with white palm | reader sees palm of hand |
| | and broken line | parallel Floor |
+--------+-----------------------------+----------------------------+
| 05 | grapheme with half black | reader sees side of hand |
| | palm and broken line | parallel Floor |
+--------+-----------------------------+----------------------------+
| 06 | grapheme with black palm | reader sees palm of hand |
| | and broken line | parallel Floor |
+--------+-----------------------------+----------------------------+
Table 16
The fill modifier is redefined for the movement arrows of category 2.
+-------+-----------------------+-----------------------------------+
| Fill | Indicator | Meaning |
+-------+-----------------------+-----------------------------------+
| 01 | a grapheme with a | movement of the right hand |
| | black arrow head | |
+-------+-----------------------+-----------------------------------+
| 02 | a grapheme with a | movement of the left hand |
| | white arrow head | |
+-------+-----------------------+-----------------------------------+
| 03 | a grapheme with a | spatial overlapping of movement |
| | thin, unconnected | arrows for the left and right |
Slevinski Expires May 13, 2015 [Page 29]
Internet-Draft SignWriting Text November 2014
| | arrow head | hands when they move as a unit |
+-------+-----------------------+-----------------------------------+
| 04 | Irregular arrow stems | building blocks for complex |
| | | movement |
+-------+-----------------------+-----------------------------------+
Table 17
The rest of the other bases use a fill modifier for grouping and
visual organization that is meaningful only for a particular base
symbol or small set.
The rotation modifier can best be understood through the hand
symbols. The first 8 rotations progress 45 degrees counter
clockwise. The last 8 rotations are a mirror of the first 8 and
progress 45 degrees clockwise. Zero (0) degrees is understood to
point to the top of the grapheme.
+----------+-------------------+------------------+
| Rotation | Direction | Degrees from top |
+----------+-------------------+------------------+
| 01 | Counter Clockwise | 0 |
+----------+-------------------+------------------+
| 02 | Counter Clockwise | 45 |
+----------+-------------------+------------------+
| 03 | Counter Clockwise | 90 |
+----------+-------------------+------------------+
| 04 | Counter Clockwise | 135 |
+----------+-------------------+------------------+
| 05 | Counter Clockwise | 180 |
+----------+-------------------+------------------+
| 06 | Counter Clockwise | 225 |
+----------+-------------------+------------------+
| 07 | Counter Clockwise | 270 |
+----------+-------------------+------------------+
| 08 | Counter Clockwise | 315 |
+----------+-------------------+------------------+
| 09 | Clockwise | 0 |
+----------+-------------------+------------------+
| 10 | Clockwise | 45 |
+----------+-------------------+------------------+
| 11 | Clockwise | 90 |
+----------+-------------------+------------------+
| 12 | Clockwise | 135 |
+----------+-------------------+------------------+
| 13 | Clockwise | 180 |
+----------+-------------------+------------------+
| 14 | Clockwise | 225 |
Slevinski Expires May 13, 2015 [Page 30]
Internet-Draft SignWriting Text November 2014
+----------+-------------------+------------------+
| 15 | Clockwise | 270 |
+----------+-------------------+------------------+
| 16 | Clockwise | 315 |
+----------+-------------------+------------------+
Table 18
B.3. Hierarchy
The symbols of the ISWA 2010 are placed in a layered hierarchy for
organization and access. There are 4 levels to the ISWA 2010
hierarchy: category, group, base, and symbol.
There are 7 categories. The first number of the symbol ID identifies
the category. The first 5 categories contain writing symbols for use
in clusters: 1) Hands, 2) Movement, 3) Dynamics & Timing, 4) Head &
Face, and 5) Body. The Body category can be broken into 2
subcategories: 5.1) Trunk and 5.2) Limb.
The 6th category is Detailed Location that contains symbols used
alone or in sequence, always outside the cluster. The 7th category
is Punctuation that contains symbols used between clusters for text.
The 7 Categories of the ISWA 2010
+-------+-------------+-------------+-------------------------------+
| Cat | Purpose | Name | Description |
+-------+-------------+-------------+-------------------------------+
| 1 | Writing | Hands | Handshapes from over 40 Sign |
| | | | Languages are placed in 10 |
| | | | groups based on the numbers |
| | | | 1-10 in American Sign |
| | | | Language. |
+-------+-------------+-------------+-------------------------------+
| 2 | Writing | Movement | Contact symbols, small finger |
| | | | movements, straight arrows, |
| | | | curved arrows and circles are |
| | | | placed into 10 groups based |
| | | | on planes: The Front Wall |
| | | | Plane includes movement that |
| | | | is "parallel to the front |
| | | | wall" and the Floor Plane |
| | | | includes movement that is |
| | | | "parallel to the floor". |
+-------+-------------+-------------+-------------------------------+
| 3 | Writing | Dynamics & | Dynamics Symbols are used to |
| | | Timing | give the "feeling" or "tempo" |
Slevinski Expires May 13, 2015 [Page 31]
Internet-Draft SignWriting Text November 2014
| | | | to movement. They provide |
| | | | emphasis on a movement or |
| | | | expression, and combined with |
| | | | Punctuation Symbols become |
| | | | the equivalent to Exclamation |
| | | | Points. The Tension Symbol, |
| | | | combined with Contact |
| | | | Symbols, provides the feeling |
| | | | of "pressure", and combined |
| | | | with facial expressions can |
| | | | place emphasis or added |
| | | | feeling to an expression. |
| | | | Timing symbols are used to |
| | | | show alternating or |
| | | | simultaneous movement. |
+-------+-------------+-------------+-------------------------------+
| 4 | Writing | Head & Face | Starting with the head and |
| | | | then from the top of the face |
| | | | and moving down. |
+-------+-------------+-------------+-------------------------------+
| 5 | Writing | Body | Torso movement, shoulders, |
| | | | hips, and the limbs are used |
| | | | in Sign Languages as a part |
| | | | of grammar, especially when |
| | | | describing conversations |
| | | | between people, called Role |
| | | | Shifting, or making spatial |
| | | | comparisons between items on |
| | | | the left and items on the |
| | | | right. |
+-------+-------------+-------------+-------------------------------+
| 6 | Detailed | Detailed | Detailed Location symbols |
| | Location | Location | used are used alone or in |
| | | | sequence outside of the |
| | | | cluster. They may be useful |
| | | | for sorting large |
| | | | dictionaries, refining |
| | | | animation, simplifying |
| | | | translation between scripts |
| | | | and notation systems, and for |
| | | | detailed analysis of location |
| | | | sometimes needed in |
| | | | linguistic research. |
+-------+-------------+-------------+-------------------------------+
| 7 | Punctuation | Punctuation | Punctuation symbols are used |
| | | | when writing complete |
| | | | sentences or documents in |
| | | | SignWriting. |
Slevinski Expires May 13, 2015 [Page 32]
Internet-Draft SignWriting Text November 2014
+-------+-------------+-------------+-------------------------------+
Table 19
There are 30 groups. The first 2 dashed numbers in the symbol ID
identify the group. The 30 groups can be divided into 3 sets of 10.
The first ten are hands, category 1. The second ten are movements,
category 2. The third ten are categories 3 thru 7. In order, 1
group for the Dynamics & Timing category, 1 for Head, 4 for Face, 1
for Trunk, 1 for Limb, 1 for Detailed Location, and 1 for
Punctuation.
The 30 groups with symbol ID segment.
+-------------------+----------------------+------------------------+
| First Set | Second Set | Third Set |
+-------------------+----------------------+------------------------+
| 01-01 Index | 02-01 Contact | 03-01 Dynamics & |
| | | Timing |
+-------------------+----------------------+------------------------+
| 01-02 Index | 02-02 Finger | 04-01 Head |
| Middle | Movement | |
+-------------------+----------------------+------------------------+
| 01-03 Index | 02-03 Straight Wall | 04-02 Brow Eyes |
| Middle Thumb | Plane | Eyegaze |
+-------------------+----------------------+------------------------+
| 01-04 Four | 02-04 Straight | 04-03 Cheeks Ears Nose |
| Fingers | Diagonal Plane | Breath |
+-------------------+----------------------+------------------------+
| 01-05 Five | 02-05 Straight Floor | 04-04 Mouth Lips |
| Fingers | Plane | |
+-------------------+----------------------+------------------------+
| 01-06 Baby Finger | 02-06 Curves | 04-05 Tongue Teeth |
| | Parallel Wall Plane | Chin Neck |
+-------------------+----------------------+------------------------+
| 01-07 Ring Finger | 02-07 Curves Hit | 05-01 Trunk |
| | Wall Plane | |
+-------------------+----------------------+------------------------+
| 01-08 Middle | 02-08 Curves Hit | 05-02 Limbs |
| Finger | Floor Plane | |
+-------------------+----------------------+------------------------+
| 01-09 Index Thumb | 02-09 Curves | 06-01 Detailed |
| | Parallel Floor Plane | Location |
+-------------------+----------------------+------------------------+
| 01-10 Thumb | 02-10 Circles | 07-01 Punctuation |
+-------------------+----------------------+------------------------+
Table 20
Slevinski Expires May 13, 2015 [Page 33]
Internet-Draft SignWriting Text November 2014
There are 652 bases. The first 4 dashed numbers of a symbol ID
identify the base. The 652 bases are divided between the 30 groups.
For each group, there are less than 60 bases. The bases are often
displayed in columns of 10.
Each base can have up to 96 symbols. All 6 dashed numbers of the
symbol ID are required to identify a symbol. Each symbol is a
combination of a base, fill, and rotation. The fill is identified by
the 5th number of the symbol ID with possible values from 01 to 06.
The rotation is identified by the 6th number of the symbol ID with
possible values from 01 to 16.
B.4. Combined Character Sequence
Each symbol of the ISWA 2010 can be expressed with a combination of 3
characters. The first character represents the base of the symbol.
The next character represents the fill of the symbol. The last
character represents the rotation of the symbol.
There are three forms the fill and rotation can use to represent
their value: a hexadecimal key, an x-Binary-SignWriting character, or
an x-Character-SignWriting character.
The x-Binary-SignWriting coded character set uses a 12-bit encoding.
Code points in this set use a "B+" prefix along with the 3
hexadecimal digits that represent the value.
The x-Character-SignWriting coded character set uses the Private Use
Area of Unicode. These code points occur on plane 15. Code points
in this set use a "U+" prefix along with the 5 hexadecimal digits
that represent the value.
The fill value ranges from 1 to 6. The fill key is 1 less than the
value and ranges from 0 to 5.
+------------+-----+----------------------+-------------------------+
| Fill Value | Key | x-Binary-SignWriting | x-Character-SignWriting |
+------------+-----+----------------------+-------------------------+
| 1 | 0 | B+110 | U+FD810 |
+------------+-----+----------------------+-------------------------+
| 2 | 1 | B+111 | U+FD812 |
+------------+-----+----------------------+-------------------------+
| 3 | 2 | B+112 | U+FD812 |
+------------+-----+----------------------+-------------------------+
| 4 | 3 | B+113 | U+FD813 |
+------------+-----+----------------------+-------------------------+
| 5 | 4 | B+114 | U+FD814 |
+------------+-----+----------------------+-------------------------+
Slevinski Expires May 13, 2015 [Page 34]
Internet-Draft SignWriting Text November 2014
| 6 | 5 | B+115 | U+FD815 |
+------------+-----+----------------------+-------------------------+
Table 21
The rotation value ranges from 1 to 16. The rotation key is written
in hexadecimal and is equal to 1 less than the value and ranges from
"0" to "f".
+----------+-------+----------------------+-------------------------+
| Rotation | Key | x-Binary-SignWriting | x-Character-SignWriting |
| Value | | | |
+----------+-------+----------------------+-------------------------+
| 1 | 0 | B+120 | U+FD820 |
+----------+-------+----------------------+-------------------------+
| 2 | 1 | B+121 | U+FD821 |
+----------+-------+----------------------+-------------------------+
| 3 | 2 | B+122 | U+FD822 |
+----------+-------+----------------------+-------------------------+
| 4 | 3 | B+123 | U+FD823 |
+----------+-------+----------------------+-------------------------+
| 5 | 4 | B+124 | U+FD824 |
+----------+-------+----------------------+-------------------------+
| 6 | 5 | B+125 | U+FD825 |
+----------+-------+----------------------+-------------------------+
| 7 | 6 | B+126 | U+FD826 |
+----------+-------+----------------------+-------------------------+
| 8 | 7 | B+127 | U+FD827 |
+----------+-------+----------------------+-------------------------+
| 9 | 8 | B+128 | U+FD828 |
+----------+-------+----------------------+-------------------------+
| 10 | 9 | B+129 | U+FD829 |
+----------+-------+----------------------+-------------------------+
| 11 | a | B+12A | U+FD82A |
+----------+-------+----------------------+-------------------------+
| 12 | b | B+12B | U+FD82B |
+----------+-------+----------------------+-------------------------+
| 13 | c | B+12C | U+FD82C |
+----------+-------+----------------------+-------------------------+
| 14 | d | B+12D | U+FD82D |
+----------+-------+----------------------+-------------------------+
| 15 | e | B+12E | U+FD82E |
+----------+-------+----------------------+-------------------------+
| 16 | f | B+12F | U+FD82F |
+----------+-------+----------------------+-------------------------+
Table 22
Slevinski Expires May 13, 2015 [Page 35]
Internet-Draft SignWriting Text November 2014
Further, a 16 bit symbol code from the x-ISWA-2010 exists for each of
the valid combined character sequences. This relationship can be
stated as (symbol code = ((base code - 256) * 96) + ((fill value - 1)
* 16) + rotation value). The first symbol code is 1 and the last
valid symbol code is 62,504.
The first symbol has an ID of "01-01-001-01-01-01" and a symbol code
of 1.
Symbol code 1 = symbol key S10000 = B+130, B+110, B+120 = U+FD830,
U+FD810, U+FD820.
Symbol code 1 = ( ( hexdec('100') - 256 ) * 96 ) + ( (
fill_value(1) - 1 ) * 16 ) + rotation_value(1).
Symbol code 1 = ( ( 256 - 256 ) * 96 ) + ( ( 1 - 1 ) * 16 ) + 1.
Symbol code 1 = ( 0 * 96 ) + ( 0 * 16 ) + 1.
Symbol code 1 = 1.
B.5. Validity
Although there are 6 possible fills and 16 possible rotations, not
every combination of base, fill, and rotation is valid. Each base
has a set of valid fills and a set of valid rotation. These validity
sets contain one or more values from the defined range.
For each value, the inclusion in the validity set can be expressed
with a value of "0" or "1". For fill values, lining up the digit
from left to right, will result in a string 6 digits long. The value
of the 6 digit number is 2 ^ (value -1).
+------------+---+---+---+---+---+---+--------+------------+
| Fill Value | 1 | 2 | 3 | 4 | 5 | 6 | Binary | Power of 2 |
+------------+---+---+---+---+---+---+--------+------------+
| 1 | X | | | | | | 100000 | 1 |
+------------+---+---+---+---+---+---+--------+------------+
| 2 | | X | | | | | 010000 | 2 |
+------------+---+---+---+---+---+---+--------+------------+
| 3 | | | X | | | | 001000 | 4 |
+------------+---+---+---+---+---+---+--------+------------+
| 4 | | | | X | | | 000100 | 8 |
+------------+---+---+---+---+---+---+--------+------------+
| 5 | | | | | X | | 000010 | 16 |
+------------+---+---+---+---+---+---+--------+------------+
| 6 | | | | | | X | 000001 | 32 |
+------------+---+---+---+---+---+---+--------+------------+
Slevinski Expires May 13, 2015 [Page 36]
Internet-Draft SignWriting Text November 2014
Table 23
The value of any fill validity set is equal to the sum of the power
of 2 for each fill value in the set. The empty set is invalid and
has a sum of zero (0). The full set of all possible fills has a sum
of 63.
+---------------+---+---+---+---+---+---+--------+------------+
| Fill Set | 1 | 2 | 3 | 4 | 5 | 6 | Binary | Power of 2 |
+---------------+---+---+---+---+---+---+--------+------------+
| {} | | | | | | | 000000 | 0 |
+---------------+---+---+---+---+---+---+--------+------------+
| {1,2,3,4,5,6} | X | X | X | X | X | X | 111111 | 63 |
+---------------+---+---+---+---+---+---+--------+------------+
Table 24
Each base has a defined validity set for fills. The "Fills" column
in the "Bases" section.
The rotation validity sets have a larger range than the fills. The
possible rotation values range from 1 to 16. The power of 2 numbers
are 16-bit.
+-------+--------+------------+
| Value | Binary | Power of 2 |
+-------+--------+------------+
| 1 | 2^0 | 1 |
+-------+--------+------------+
| 2 | 2^1 | 2 |
+-------+--------+------------+
| 3 | 2^2 | 4 |
+-------+--------+------------+
| 4 | 2^3 | 8 |
+-------+--------+------------+
| 5 | 2^4 | 16 |
+-------+--------+------------+
| 6 | 2^5 | 32 |
+-------+--------+------------+
| 7 | 2^6 | 64 |
+-------+--------+------------+
| 8 | 2^7 | 128 |
+-------+--------+------------+
| 9 | 2^8 | 256 |
+-------+--------+------------+
| 10 | 2^9 | 512 |
+-------+--------+------------+
| 11 | 2^10 | 1024 |
Slevinski Expires May 13, 2015 [Page 37]
Internet-Draft SignWriting Text November 2014
+-------+--------+------------+
| 12 | 2^11 | 2048 |
+-------+--------+------------+
| 13 | 2^12 | 4096 |
+-------+--------+------------+
| 14 | 2^13 | 8192 |
+-------+--------+------------+
| 15 | 2^14 | 16384 |
+-------+--------+------------+
| 16 | 2^15 | 32768 |
+-------+--------+------------+
Table 25
The value of a rotation validity set is the summation of the power of
2 numbers. The minimum summation is 1. The largest possible
summation is 65,535 where all 16 rotations are valid.
Each base has a defined validity set for rotations. The "Rotations"
column in the "Bases" section.
Interestingly enough, there are only 12 possible validity sets in the
ISWA 2010.
+---------+--------------------------+------------------------------+
| Sum | Binary | Set |
+---------+--------------------------+------------------------------+
| 1 | 100000 | {1} |
+---------+--------------------------+------------------------------+
| 2 | 010000 | {2} |
+---------+--------------------------+------------------------------+
| 3 | 110000 | {1, 2} |
+---------+--------------------------+------------------------------+
| 7 | 111000 | {1, 2, 3} |
+---------+--------------------------+------------------------------+
| 15 | 111100 | {1, 2, 3, 4} |
+---------+--------------------------+------------------------------+
| 31 | 111110 | {1, 2, 3, 4, 5} |
+---------+--------------------------+------------------------------+
| 63 | 111111 | {1, 2, 3, 4, 5, 6} |
+---------+--------------------------+------------------------------+
| 187 | 11011101 | {1, 2, 4, 5, 6, 8} |
+---------+--------------------------+------------------------------+
| 255 | 11111111 | {1, 2, 3, 4, 5, 6, 7, 8} |
+---------+--------------------------+------------------------------+
| 511 | 1111111110000000 | {1, 2, 3, 4, 5, 6, 7, 8, 9} |
+---------+--------------------------+------------------------------+
| 48059 | 1101110111011101 | {1, 2, 4, 5, 6, 8, 9, 10, |
Slevinski Expires May 13, 2015 [Page 38]
Internet-Draft SignWriting Text November 2014
| | | 12, 13, 14, 16} |
+---------+--------------------------+------------------------------+
| 65535 | 1111111111111111 | {1, 2, 3, 4, 5, 6, 7, 8, 9, |
| | | 10, 11, 12, 13, 14, 15, 16} |
+---------+--------------------------+------------------------------+
Table 26
Appendix C. SignPuddle Standard
The SignPuddle Standard for SignWriting text has been stable since
January 12th, 2012.
C.1. Licenses
The font software is available under SIL's Open Font License.
The reference material is licensed under Creative Commons
attribution, share alike (by-sa).
The current open source projects are licensed under the GPL 2 for
MediaWiki and GPL 3 for the general software on Github. Any
contributions to the open source code must agree to a possible
relicense in the future under a BSD like license.
After the financial issues [7] of the Center for Sutton Movement
Writing have been addressed, the open source projects will relicensed
under a more open and free BSD-like license, such as the MIT License.
C.2. Infrastructure
C.2.1. International SignWriting Alphabet 2010
The International SignWriting Alphabet 2010 (ISWA 2010) Font
Reference [8] is a product of the collaboration between SignWriting
inventor, Valerie Sutton, and SignWriting encoder Stephen E Slevinski
Jr. Special thanks to Adam Frost's excellent work on the SVG
refinement and more.
The ISWA 2010 fonts have been stable since their initial release on
October 20th, 2010.
Valerie Sutton
o hand crafted and organized 30K plus individual glyphs
o created a 2 dimension PNG of 3 colors for each
Slevinski Expires May 13, 2015 [Page 39]
Internet-Draft SignWriting Text November 2014
o named each individual glyph with 6 degrees of significance
o font name: ISWA 2010 Sutton
Steve Slevinski
o counted and numbered the glyphs
o created mathematical names
o analyzed PNGs for line and fill
o refactored glyphs - font name: ISWA 2010 PNG Standard
o extended glyphs - font names: ISWA 2010 PNG Inverse, Shadow,
Colorized
o traced glyphs - font names: ISWA 2010 SVG Line Trace, Shaddow
Trace, Smooth, and Angular
o refactored and extended Adam's SVG work - font name: ISWA 2010 SVG
Refinement
Adam Frost
o manually traced each and every glyph that could not be
automatically rotated
o font name: ISWA 2010 SVG Refinement
o physically performed and photographed every hand shape
o font name: ISWA 2010 Hand Photo
o consulted with Valerie in places of ambiguity
o found the Facial Irregularity, documented in the ISWA 2010 Errata
C.2.2. SignPuddle Online
SignPuddle Online [9] is the current home of the international
community of online writers of the SignWriting Script. Online tools
make it possible to create SignWriting dictionaries and documents
directly on the web. Each collection is freely available as a small
XML file [10]. Dozens of sign languages from around the world are
represented. Each language can have several collections of
SignWriting.
Slevinski Expires May 13, 2015 [Page 40]
Internet-Draft SignWriting Text November 2014
C.2.3. SignWriting Icon Server
The SignWriting Icon Server is the current generation SignWriting
server code for SVG, PNG, and other image formats. The image
creation is stable and fully implemented. The API is a proof of
concept with only an initial level of support.
The main server is available on Wikimedia Labs [11] for all
SignWriting projects.
A backup server is available on SignBank [12].
Each SignWriting Icon Server provides the SignWriting Thin Viewer as
a site script and as a bookmark.
Additional SignWriting Icon Servers can be created directly from the
GitHub source.
C.2.4. SignWriting Asset Provider
The SignWriting Asset Provider is the next generation SignWriting
server code for SVG creation and data processing. Symbols and signs
can be accessed with a simple syntax. Data from SignPuddle Online
can be queried with an API and returns JSON data.
Coming soon...
C.2.5. Wikimedia Incubator
The SignWriting Script has been enabled on Wikimedia Incubator using
the SignWriting Gadget.
C.2.6. SignWriting Thin Viewer
The SignWriting Thin Viewer uses JavaScript to wrap the sign names
with basic HTML and CSS to fully supports the grammar of written ASL.
This script can be applied to any modern browser through a site
script or initiated within a browser using a bookmark.
C.3. Compatibility
SignTyp, SignWriter Studio, the DELEGS Editor, SWift, and more.
Slevinski Expires May 13, 2015 [Page 41]
Internet-Draft SignWriting Text November 2014
C.3.1. SignTyp
This standard is being integrated with the SignTyp linguistic coding
system developed by Rachel Channon through an NSF grant.
Notation Systems [13] by Harry van der Hulst and Rachel Channon.
Why dynamic features? [14] by Harry van der Hulst and Rachel
Channon.
Transcription systems as input to coding systems: SignWriting &
SignTyp [15] by Charles Butler and Rachel Channon.
C.3.2. SignWriter Studio
SignWriter Studio [16] is a Windows-only compatible application by
Jonathan Duncan. It has an alternate symbol selection technique.
According to Valerie Sutton, it illustrates a unique insight into the
hand shapes of the ISWA.
Jonathan Duncan writes:
SignWriter Studio has 4 ways to get the basic symbol base, and 3
ways to modify the selected base.
1) Select the base symbol from a complete list of base symbols
organized in a tree view 2) Search for a hand symbol in hand
search section by hand feature. 3) Select a symbol already
present in the signbox. 4) Select a symbol from a Favorites
section.
Then one of three chooser to define the fill and rotation will
become available. 1)The hand chooser. 2)The arrow chooser.
3)The general chooser.
The Hand chooser is to quickly find the symbol for a certain,
hand, plain(wall or floor), palm facing and rotation. The Hand
Chooser also extends add a fourth palm facing to logically show
all possible symbols in their most common uses. This chooser
resembles the instruction manual explaining the use of hand
shapes.
The Arrow Chooser is to quickly find arrows for a certain hand,
plain(wall or floor) and rotation.This chooser resembles the
instruction manual explaining the use of arrows.
Slevinski Expires May 13, 2015 [Page 42]
Internet-Draft SignWriting Text November 2014
The General Chooser is for symbols for which the two previous
chooser do not work well and gives a grouped list of symbols for
the base group.
C.3.3. DELEGS Online
The DELEGS Editor [17] from the University of Hamburg and C1 WPS GmbH
in Germany is designed for Deaf Education. It is a tool for writing
translation texts between spoken and signed languages.
Spoken language text is used to display horizontal SignWriting Text
from left to right. The spoken language can appear beneath the sign
or it can be hidden.
C.3.4. SWift
SWift is a SignWriting improved fast transcriber [18] from Claudia
Savina Bianchini, Fabrizio Borgia, and Maria De Marsico. SWift is
under active development. The design "guides and simplifies the
editing process".
SWift uses an alternate symbol hierarchy than the ISWA 2010. A
conversion library is planned in the future to support Formal
SignWriting strings.
Author's Address
Stephen E Slevinski Jr
SignPuddle
Email: slevin@signpuddle.net
Slevinski Expires May 13, 2015 [Page 43]