Passive Interface Attribute
draft-wang-lsr-passive-interface-attribute-00
The information below is for an old version of the document.
Document | Type |
This is an older version of an Internet-Draft whose latest revision state is "Replaced".
Expired & archived
|
|
---|---|---|---|
Authors | Aijun Wang , Zhibo Hu | ||
Last updated | 2020-07-12 (Latest revision 2020-01-09) | ||
Replaced by | draft-wang-lsr-stub-link-attributes | ||
RFC stream | (None) | ||
Formats | |||
Stream | Stream state | (No stream defined) | |
Consensus boilerplate | Unknown | ||
RFC Editor Note | (None) | ||
IESG | IESG state | Expired | |
Telechat date | (None) | ||
Responsible AD | (None) | ||
Send notices to | (None) |
This Internet-Draft is no longer active. A copy of the expired Internet-Draft is available in these formats:
Abstract
This document describes the mechanism that can be used to differentiate the passive interfaces from the normal interfaces within ISIS domain.
Authors
(Note: The e-mail addresses provided for the authors of this Internet-Draft may no longer be valid.)