SRPM Path Consistency over SRv6
draft-weng-ippm-srpm-path-consistency-over-srv6-07
| Document | Type |
This is an older version of an Internet-Draft whose latest revision state is "Active".
Expired & archived
|
|
|---|---|---|---|
| Authors | sijun weng , Weiqiang Cheng , Changwang Lin , Xiao Min , Jinming Li | ||
| Last updated | 2024-12-27 (Latest revision 2024-06-25) | ||
| RFC stream | (None) | ||
| Formats | |||
| Stream | Stream state | (No stream defined) | |
| Consensus boilerplate | Unknown | ||
| RFC Editor Note | (None) | ||
| IESG | IESG state | Expired | |
| Telechat date | (None) | ||
| Responsible AD | (None) | ||
| Send notices to | (None) |
This Internet-Draft is no longer active. A copy of the expired Internet-Draft is available in these formats:
Abstract
TWAMP can be used to measure the performance of end-to-end paths in networks. STAMP [rfc8762] and TWAMP light are more lightweight measurement methods. In the SRv6 network, it is also necessary to measure the performance of SRv6 policy. This document describes a method to measure srv6 policy through stamp and TWAMP light.
Authors
sijun weng
Weiqiang Cheng
Changwang Lin
Xiao Min
Jinming Li
(Note: The e-mail addresses provided for the authors of this Internet-Draft may no longer be valid.)