Skip to main content

Detecting Data Plane Failures in Point-to-Multipoint MPLS Traffic Engineering - Extensions to LSP Ping
draft-yasukawa-mpls-p2mp-lsp-ping-02

Document Type Replaced Internet-Draft (individual)
Expired & archived
Author Seisho Yasukawa
Last updated 2011-07-26 (Latest revision 2005-04-14)
Replaced by draft-ietf-mpls-p2mp-lsp-ping
RFC stream (None)
Intended RFC status (None)
Formats
Stream Stream state (No stream defined)
Consensus boilerplate Unknown
RFC Editor Note (None)
IESG IESG state Replaced by draft-ietf-mpls-p2mp-lsp-ping
Telechat date (None)
Responsible AD (None)
Send notices to (None)

This Internet-Draft is no longer active. A copy of the expired Internet-Draft is available in these formats:

Abstract

Recent proposals have extended the scope of Multi-Protocol Label Switching (MPLS) traffic engineered Label Switched Paths (TE LSPs) to encompass point-to-multipoint (P2MP) TE LSPs.

Authors

Seisho Yasukawa

(Note: The e-mail addresses provided for the authors of this Internet-Draft may no longer be valid.)