L3DL Upper Layer Protocol Configuration
draft-ymbk-lsvr-l3dl-ulpc-02
The information below is for an old version of the document.
| Document | Type | Expired Internet-Draft (individual) | |
|---|---|---|---|
| Authors | Randy Bush , Keyur Patel | ||
| Last updated | 2020-05-05 (Latest revision 2019-11-02) | ||
| Stream | (None) | ||
| Formats |
Expired & archived
plain text
htmlized
pdfized
bibtex
|
||
| Stream | Stream state | (No stream defined) | |
| Consensus boilerplate | Unknown | ||
| RFC Editor Note | (None) | ||
| IESG | IESG state | Expired | |
| Telechat date | (None) | ||
| Responsible AD | (None) | ||
| Send notices to | (None) |
This Internet-Draft is no longer active. A copy of
the expired Internet-Draft can be found at:
https://www.ietf.org/archive/id/draft-ymbk-lsvr-l3dl-ulpc-02.txt
https://www.ietf.org/archive/id/draft-ymbk-lsvr-l3dl-ulpc-02.txt
Abstract
This document users the Layer 3 Liveness and Discovery protocol to communicate the parameters needed to exchange inter-device Upper Layer Protocol Configuration for upper layer protocols such as the BGP family.
Authors
(Note: The e-mail addresses provided for the authors of this Internet-Draft may no longer be valid.)