Skip to main content

RBridges: TRILL Base MIB

Document Type Replaced Internet-Draft (individual)
Expired & archived
Authors Kate Zebrose , Donald E. Eastlake 3rd
Last updated 2009-10-19
Replaced by RFC 6850
RFC stream (None)
Intended RFC status (None)
Stream Stream state (No stream defined)
Consensus boilerplate Unknown
RFC Editor Note (None)
IESG IESG state Replaced by draft-ietf-trill-rbridge-mib
Telechat date (None)
Responsible AD (None)
Send notices to (None)

This Internet-Draft is no longer active. A copy of the expired Internet-Draft is available in these formats:


This memo defines a portion of the Management Information Base (MIB) for use with network management protocols. In particular it defines objects for managing RBridges, which are devices that implement the TRILL base protocol. Since RBridges provide optimal pair-wise forwarding without configuration there is no required configuration. Status information that may be helpful in network management is specified. The MIB is specified with all objects read-only for simplicity and since that is how the MIB is expected to be used. The description is used to indicate those objects that can be configured, although the actual configuration is outside the scope of this document.


Kate Zebrose
Donald E. Eastlake 3rd

(Note: The e-mail addresses provided for the authors of this Internet-Draft may no longer be valid.)