Extensions to the Path Computation Element Communication Protocol (PCEP) for Point-to-Multipoint Traffic Engineering Label Switched Paths
draft-zhao-pce-pcep-extension-p2mp-00
| Document | Type |
Expired Internet-Draft
(individual)
Expired & archived
|
|
|---|---|---|---|
| Authors | Daniel King , Fabien Verhaeghe , Quintin Zhao , Tomonori Takeda | ||
| Last updated | 2008-02-17 | ||
| RFC stream | (None) | ||
| Intended RFC status | (None) | ||
| Formats | |||
| Stream | Stream state | (No stream defined) | |
| Consensus boilerplate | Unknown | ||
| RFC Editor Note | (None) | ||
| IESG | IESG state | Expired | |
| Telechat date | (None) | ||
| Responsible AD | (None) | ||
| Send notices to | (None) |
This Internet-Draft is no longer active. A copy of the expired Internet-Draft is available in these formats:
Abstract
Point-to-point Multiprotocol Label Switching (MPLS) and Generalized MPLS (GMPLS) Traffic Engineering Label Switched Paths (TE LSPs) may be established using signaling techniques, but their paths may first be determined. The Path Computation Element (PCE) has been identified as an appropriate technology for the determination of the paths of P2MP TE LSPs. This document describes extensions to the PCE Communication Protocol PCEP) to handle requests and responses for the computation of paths for P2MP TE LSPs.
Authors
Daniel King
Fabien Verhaeghe
Quintin Zhao
Tomonori Takeda
(Note: The e-mail addresses provided for the authors of this Internet-Draft may no longer be valid.)