Inline Action Capability for NETCONF
draft-zheng-netconf-inline-action-capability-01
The information below is for an old version of the document.
| Document | Type | Active Internet-Draft (individual) | |
|---|---|---|---|
| Authors | Guangying Zheng , Qin Wu | ||
| Last updated | 2018-07-01 (Latest revision 2018-06-26) | ||
| Stream | (None) | ||
| Formats | plain text xml htmlized pdfized bibtex | ||
| Stream | Stream state | (No stream defined) | |
| Consensus boilerplate | Unknown | ||
| RFC Editor Note | (None) | ||
| IESG | IESG state | I-D Exists | |
| Telechat date | (None) | ||
| Responsible AD | (None) | ||
| Send notices to | (None) |
draft-zheng-netconf-inline-action-capability-01
NETCONF Working Group W. Zheng
Internet-Draft Q. Wu
Intended status: Standards Track Huawei
Expires: January 2, 2019 July 1, 2018
Inline Action Capability for NETCONF
draft-zheng-netconf-inline-action-capability-01
Abstract
This document defines capability based extension to NETCONF protocol
that enables modification of <edit-config> operation and <edit-data>
operation to accept action parameters and attributes and allows
multiple sub-operations with inline action operation that apply to
either different or the same conceptual node in the underlying data
model in one transaction.
Status of This Memo
This Internet-Draft is submitted in full conformance with the
provisions of BCP 78 and BCP 79.
Internet-Drafts are working documents of the Internet Engineering
Task Force (IETF). Note that other groups may also distribute
working documents as Internet-Drafts. The list of current Internet-
Drafts is at https://datatracker.ietf.org/drafts/current/.
Internet-Drafts are draft documents valid for a maximum of six months
and may be updated, replaced, or obsoleted by other documents at any
time. It is inappropriate to use Internet-Drafts as reference
material or to cite them other than as "work in progress."
This Internet-Draft will expire on January 2, 2019.
Copyright Notice
Copyright (c) 2018 IETF Trust and the persons identified as the
document authors. All rights reserved.
This document is subject to BCP 78 and the IETF Trust's Legal
Provisions Relating to IETF Documents
(https://trustee.ietf.org/license-info) in effect on the date of
publication of this document. Please review these documents
carefully, as they describe your rights and restrictions with respect
to this document. Code Components extracted from this document must
include Simplified BSD License text as described in Section 4.e of
Zheng & Wu Expires January 2, 2019 [Page 1]
Internet-Draft Inline Action Capability July 2018
the Trust Legal Provisions and are provided without warranty as
described in the Simplified BSD License.
Table of Contents
1. Introduction . . . . . . . . . . . . . . . . . . . . . . . . 2
1.1. Terminology . . . . . . . . . . . . . . . . . . . . . . . 3
2. Inline-Action Capability . . . . . . . . . . . . . . . . . . 3
2.1. Description . . . . . . . . . . . . . . . . . . . . . . . 3
2.2. Dependencies . . . . . . . . . . . . . . . . . . . . . . 3
2.3. Capability Identifier . . . . . . . . . . . . . . . . . . 3
2.4. New Operations . . . . . . . . . . . . . . . . . . . . . 3
2.5. Modifications to Existing Operations . . . . . . . . . . 3
2.5.1. <edit-config> and <edit-data> . . . . . . . . . . . . 3
3. Security Considerations . . . . . . . . . . . . . . . . . . . 5
4. IANA Considerations . . . . . . . . . . . . . . . . . . . . . 6
4.1. NETCONF Capability URN . . . . . . . . . . . . . . . . . 6
5. Normative References . . . . . . . . . . . . . . . . . . . . 6
Authors' Addresses . . . . . . . . . . . . . . . . . . . . . . . 7
1. Introduction
YANG 1.1 define the syntax and semantics of version 1.1 of the YANG
language, which can be used to model configuration data, state data,
Remote Procedure Calls, and notifications for network management
protocols. One key Difference from YANG 1.0, is a new statement
"action", is added to YANG 1.1 to define operations connected to a
specific container or list data node in a datastore. However which
data node is applied to which configuration datastore is not
specified under "action".
The <edit-data> operation defined in [I-D.ietf-netconf-nmda-netconf]
and the <edit-config> operation defined in [RFC6241], are used to
changes the contents of a writable Datastore. Containers and List
entries can be created, deleted, replaced, and modified through
<edit-config> by using the "operation" attribute in the container's
and List's XML element. However the action is not part of <config>
element in either <edit- data> operation or <edit-config> operation.
Therefore the action operation and <edit-data> operation or <edit-
config> operation connected to the same data node can not
automatically handled in sequence in one transaction.
This document defines capability based extension to NETCONF protocol
that enables modification of <edit-config> operation and <edit-data>
operation to accept action parameters and allows multiple sub-
operations with inline action operation that apply to different or
same conceptual node in the underlying data model in one transaction.
Zheng & Wu Expires January 2, 2019 [Page 2]
Internet-Draft Inline Action Capability July 2018
1.1. Terminology
The key words "MUST", "MUST NOT", "REQUIRED", "SHALL", "SHALL NOT",
"SHOULD", "SHOULD NOT", "RECOMMENDED", "NOT RECOMMENDED", "MAY", and
"OPTIONAL" in this document are to be interpreted as described in BCP
14 [RFC2119] [RFC8174] when, and only when, they appear in all
capitals, as shown here.
2. Inline-Action Capability
2.1. Description
The :inline-action capability indicates that the device supports
Inline-action operation within <edit-config> and <edit-data>
operation on writable configuration datastore. In other words, the
device supports <inline-action> operation is included in <edit-
config> and <edit-data> operations.
2.2. Dependencies
None.
2.3. Capability Identifier
The :inline-action capability is identified by the following
capability string:
urn:ietf:params:netconf:capability:inline-action:1.1
2.4. New Operations
None.
2.5. Modifications to Existing Operations
2.5.1. <edit-config> and <edit-data>
The :inline-action:1.1 capability modifies the <edit-config> <edit-
data>operation to accept the <action> parameter and <action>
attribute value within operation attribute.
As described in [RFC6241], "operation" attribute is defined in a
element within <config> subtree and identify the point in the
configuration to perform the operation and MAY appear on multiple
elements throughout the <config> subtree. In this document, a new
"operation" attribute value is added as follows:
Zheng & Wu Expires January 2, 2019 [Page 3]
Internet-Draft Inline Action Capability July 2018
inline-action: The configuration data identified by the element
containing this attribute is accompanied with action operation
applied to a subset of configuration within <config> subtree
before edit operation is applied to the same configuration at the
corresponding level in the configuration datastore identified by
the <target> parameter.
In addition,the inline-action operation attribute and other
"operation" attributes can apply to the same conceptual nodes in the
underlying data model. The assumption is the inline-action operation
attribute and other "operation" attributes applied to the same
conceptual nodes will not cause unexpected operation results.
As described in [RFC6241], the config subtree is expressed as A
hierarchy of configuration data as defined by one of the device's
data models. The contents MUST follow the constraints of that data
model, as defined by its capability definition. If inline action
capability is supported, the config subtree may contain a schema node
with the name "input" and a schema node with the name "output"
connected to a specific container or list data node containing action
element in a datastore.
Example:
container interfaces {
list interface {
key "name";
config true;
leaf name {
type string;
}
leaf mtu {
type uint32;
}
}
action ifstatenable {
input {
leaf enable {
type boolean;
mandatory true;
}
}
}
}
Enable ifstatistics on 1000 interfaces from the running configuration
before setting the MTU to 1500 on an interface named "Ethernet0/0"
Zheng & Wu Expires January 2, 2019 [Page 4]
Internet-Draft Inline Action Capability July 2018
and 1000 on an interface named "Ethernet0/1" in the running
configuration:
<rpc message-id="101"
xmlns="urn:ietf:params:xml:ns:netconf:base:1.1">
<edit-config>
<target>
<running/>
</target>
<default-operation>none</default-operation>
<config xmlns:xc="urn:ietf:params:xml:ns:netconf:base:1.1">
<top xmlns="http://example.com/schema/1.2/config">
<interfaces>
<interface xc:operation="merge">
<name>Ethernet0/0</name>
<mtu>1500</mtu>
</interface>
<interface>
<name>Ethernet0/1</name>
<mtu>1000</mtu>
</interface>
<action xmlns="http://example.com/schema/1.2/config">
<ifstatenable xc:operation="action">
<input>
<enable>true</enable>
</input>
</ifstatenable>
</action>
</interfaces>
</top>
</config>
</edit-config>
</rpc>
<rpc-reply message-id="101"
xmlns="urn:ietf:params:xml:ns:netconf:base:1.1">
<ok/>
</rpc-reply>
3. Security Considerations
This document does not introduce any security vulnerability besides
on defined in [RFC6241].
Zheng & Wu Expires January 2, 2019 [Page 5]
Internet-Draft Inline Action Capability July 2018
4. IANA Considerations
4.1. NETCONF Capability URN
IANA has created and now maintains a registry "Network Configuration
Protocol (NETCONF) Capability URNs" that allocates NETCONF capability
identifiers. Additions to the registry require IETF Standards
Action.
IANA has added the following capabilities to the registry:
Index
Capability Identifier
------------------------
:inline-action:1.1
urn:ietf:params:netconf:capability:inline-action:1.1
5. Normative References
[I-D.ietf-netconf-nmda-netconf]
Bjorklund, M., Schoenwaelder, J., Shafer, P., Watsen, K.,
and R. Wilton, "NETCONF Extensions to Support the Network
Management Datastore Architecture", draft-ietf-netconf-
nmda-netconf-06 (work in progress), May 2018.
[RFC2119] Bradner, S., "Key words for use in RFCs to Indicate
Requirement Levels", BCP 14, RFC 2119,
DOI 10.17487/RFC2119, March 1997,
<https://www.rfc-editor.org/info/rfc2119>.
[RFC6020] Bjorklund, M., Ed., "YANG - A Data Modeling Language for
the Network Configuration Protocol (NETCONF)", RFC 6020,
DOI 10.17487/RFC6020, October 2010,
<https://www.rfc-editor.org/info/rfc6020>.
[RFC6021] Schoenwaelder, J., Ed., "Common YANG Data Types",
RFC 6021, DOI 10.17487/RFC6021, October 2010,
<https://www.rfc-editor.org/info/rfc6021>.
[RFC6241] Enns, R., Ed., Bjorklund, M., Ed., Schoenwaelder, J., Ed.,
and A. Bierman, Ed., "Network Configuration Protocol
(NETCONF)", RFC 6241, DOI 10.17487/RFC6241, June 2011,
<https://www.rfc-editor.org/info/rfc6241>.
[RFC6242] Wasserman, M., "Using the NETCONF Protocol over Secure
Shell (SSH)", RFC 6242, DOI 10.17487/RFC6242, June 2011,
<https://www.rfc-editor.org/info/rfc6242>.
Zheng & Wu Expires January 2, 2019 [Page 6]
Internet-Draft Inline Action Capability July 2018
[RFC6470] Bierman, A., "Network Configuration Protocol (NETCONF)
Base Notifications", RFC 6470, DOI 10.17487/RFC6470,
February 2012, <https://www.rfc-editor.org/info/rfc6470>.
Authors' Addresses
Walker Zheng
Huawei
101 Software Avenue, Yuhua District
Nanjing, Jiangsu 210012
China
Email: zhengguangying@huawei.com
Qin Wu
Huawei
101 Software Avenue, Yuhua District
Nanjing, Jiangsu 210012
China
Email: bill.wu@huawei.com
Zheng & Wu Expires January 2, 2019 [Page 7]